
PARTS LIST
2
PART
No.
1
2
3
4
Rods Connectors
Rods Shelves
PART
No.
DESCRIPTION DESCRIPTIONDIAGRAM DIAGRAMQTY. QTY.
BEFORE YOU BEGIN
ASSEMBLY INSTRUCTIONS
Read through the entire instructions before assembling.
Please check that you have all of the parts before starting assembly.
Assembly of the greenhouse is easier with two people.
Assemble the greenhouse on a dry, level surface.
The best way to connect rods with connectors is to twist them in, all the way. Ensure
that they are fully pushed in.
If using a rubber mallet to help with assembly, be sure not to damage parts by using
excessive force.
Handle parts with care.
The shelf should be installed in an area protected against high winds and
wind-driven rain.
Your greenhouse shelves are now ready for use.