HOMEDEPOT CEETECH 5106-WH-BK/RD User manual

Installation: Binding Posts
Distributed by: Home Depot U.S.A., Inc.
2455 Paces Ferry Rd., NE, Atlanta, GA 30339
For assistance, call: 1-800-394-7519
HOMEDEPOT.COM
Item #1000015548
Model #5106-LA-BK/RD
Item #1000015549
Model #5106-WH-BK/RD
Visual Installation Guide
Binding Posts
Install all desired Binding Posts into keystone wall plate.Place Binding Post insert at an angle into the keystone port with
the tab up. Tilt insert up to lock in place.
Tighten each binding post to secure wires.
*NOTE* Red is positive (+) and black is negative (–).
Binding Post pair: Red (positive +), Black (negative -). Unscrew the rear portion of each binding post .
1.
5. 6.
4.
2.
Remove about ½” of insulation from each speaker wire, then feed
through opening on the side of the binding post.
3.
Page 1 of 2

Installation: Binding Posts (continued)
Distributed by: Home Depot U.S.A., Inc.
2455 Paces Ferry Rd., NE, Atlanta, GA 30339
For assistance, call: 1-800-394-7519
HOMEDEPOT.COM
Binding Posts are compatible with most standard keystone
wall plates; they are also compatible with most banana plugs.
The Binding Posts should be tight and speaker wire
should not be loose.
Tighten each binding post to secure wires.
*NOTE* Red is positive (+) and black is negative (–).
Mount wall plate to low voltage mounting bracket (not included). Unscrew Binding Posts to expose the front side wire feed through.
7.
11. 12.
10.
8.
Remove about ½” of insulation from each speaker wire and feed
through opening on side of the Binding Post.
9.
Item #1000015548
Model #5106-LA-BK/RD
Item #1000015549
Model #5106-WH-BK/RD
Visual Installation Guide
Binding Posts (continued)
Page 2 of 2