HOMEDEPOT MF212219AAB User manual

ITEM: 227T
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB
WEIGHT LIMIT
400 LBS
PAGE 1 OF 10
PLEASE DO NOT RETURN PRODUCT TO THE STORE.
If you have any problem or concerns, please feel free
to contact our customer service department.
Please send your request to the following contact
details according to the platform you purchased.
Walmart Platform:
E-mail : [e-mail]
Tell: 626-912-8886 Ext. 100

PAGE 2 OF 10
PART LIST-MF212219AAB
PART LIST-MF212220AAB
vertical bar - 1pc vertical bar - 1pc vertical bar - 1pc vertical bar - 1pc vertical bar - 1pc
vertical bar - 2pcs
guard bar - 2pcs
horizontal long bar - 2pcs
horizontal bar - 1pc horizontal bar - 1pc horizontal bar - 1pc horizontal bar - 1pc
hand rail - 1pc headboard - 1pc
headboard - 1pc footboard - 1pc footboard - 1pc
horizontal bar - 1pc guard handrail - 1pc
vertical bar - 1pc
slat - 2pcs slat - 10pcs
horizontal bar - 9pcs wooden shelf panel - 1pc
horizontal short bar - 3pcs
horizontal bar - 1pc
wooden shelf panel - 1pc
wooden shelf panel - 1pc wooden shelf panel - 1pc
wooden table panel - 1pc

PART LIST
12 3 456
78911
13 14 15 16 17
1
4
2
3
5
6
7
9
19
8
10
14
11
12
15
16
17 18
21
22 23
24
20
25
26
27
28
29
30
31
13
PAGE 3 OF 10
hand rail - 1pc
vertical bar - 1pc vertical bar - 1pc vertical bar - 1pc vertical bar - 1pcvertical bar - 1pc
guard bar - 2pcs headboard - 1pc
headboard - 1pc
horizontal bar - 1pc horizontal bar - 1pc horizontal bar - 1pc horizontal bar - 1pc
12
footboard - 1pc
9
vertical bar - 1pcvertical bar - 1pc
10
footboard - 1pc
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB

AB
E
C D
H
HARDWARE LIST - MF212219AAB
18 PART LIST
19 20 21 23
24 26 27 28
29
F
25
31
30
PAGE 4 OF 10
vertical bar - 1pc horizontal bar - 1pc horizontal bar - 1pc guard handrail - 1pc horizontal long bar - 2pcs
horizontal short bar - 3pcs
horizontal bar - 9pcs slat - 2pcs slat - 10pcs wooden shelf panel - 1pc wooden shelf panel - 1pc
wooden shelf panel - 1pc wooden shelf panel - 1pc
Bolts - 30pcs Bolts - 33pcs Bolts - 26pcs Bolts - 18pcs
Ø1/4"*60mm Ø1/4"*40mm Ø1/4"*28mm Ø1/4"*15mm
4*58mm
Ø33x10mm
Ø42x10mm
Pipe plug - 8pcs Pipe plug - 2pcs Allen key - 1pc
wooden table panel - 1pc
22
SAFETY WARNINGS AND GENERAL NOTES :
*Do not allow children under 6 years of age to use the upper bunk.
*The top surface of the mattress must be at least 5* (127mm) below the upper edge of the guardrail.
*Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls.
*Periodically check and ensure the guardrail, ladder and other components are in their proper position, free
from damage, and all connectors are tight.
*Always use the ladder for entering and leaving the upper bunk.
*Prohibit horseplay on or under beds. Always prohibit jumping on the bed.
*Do not use substitute parts.Contact the manufacturer or dealer for replacement parts.
*Follow the information on the warnings on the bunk bed end structure and on the carton.
Do not remove the warning label from the bed.
*Prohibit more than one person on upper bunk.
This set is included 2 boxes if don't receive full 2 boxes please contact our customer service team.
*Always use guardrails on both long sides of the upper bunk.
*Use of a night-tight may provide added safely precaution for a child using the upper bunk.
*We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet.Be certain all
staples are out of the box before beginning assembly on the shipping carton.
*Keep these instructions for future reference.
*The use of water or sleep flotation mattresses is prohibited.
*If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and the wall.
STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are not designed
for use with the bed; for example, but not limited to, hooks, belts, and jumping ropes.
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB

1
2
3
4
19
20 A*4
B*1
H
Ø1/4"*15mm -3pcs
D
F
D
PAGE 5 OF 10
A
F*2
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
NOTE:In this step, DO NOT tighten
any bolt until you connect all part together
STEP 1:Following below illustration Assembly FRAME #1.
Using hardware #D connect #1, #2, #4 vertical bar
with #3 hard rail to complete FRAME #1
STEP 2:Following below illustration Assembly FRAME #2. Using hardware #A, #B connect #19, #20
horizontal bar with FRAME #1 to complete FRAME #2
Ø1/4"*60mm - 4pcs
H
F
A
Ø33x10mm - 2pcs
Ø1/4"*40mm-1pc
B
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB

H
A
B
D
H
D
E
E
5
6
13
14
15
16
17
18
12
10
11
A
A*6
A*5
A*7 B*2
B*2
D*1
PAGE 6 OF 10
E
E
E*4
E*4
A
H
A
H
8
7
D
STEP 3:Following below illustration Assembly FRAME #3.
Using hardware #A, #B, #D connect #14, #15, #16, #17 horizontal
bar, #12,#13 footboard and #18 vertical bar with #5,#6 vertical bar
to complete FRAME #3
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
STEP 4:Following below illustration Assembly FRAME #4.
Using hardware #A, #D connect #10,#11 headboard with #7, #8
vertical bar to complete FRAME #4
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
Ø1/4"*60mm - 12pcs
Ø1/4"*40mm - 4pcs
Ø1/4"*15mm - 1pc
Ø42x10mm - 4pcs
Ø1/4"*60mm - 6pcs
Ø1/4"*15mm - 2pcs
Ø42x10mm - 4pcs
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB

H
9
9
26
25
22
23
B
HB
H
D
PAGE 7 OF 10
Ø1/4"*15mm - 4pcs
DH
STEP 5:Following below illustration Assembly FRAME #5.
Using hardware #D connect #9 guard bar with #25,#26 slat to complete FRAME #5
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
STEP 6:Following below illustration Assembly FRAME #6.
Using hardware #B connect #23 horizontal short bar with #22 horizontal long bar to complete FRAME #6
Ø1/4"*40mm - 6pcs
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB

H
D
B
A
H
DB
21
24
24
A*4
A*4
B*2
B*2
D*2
D*2
B*18
D*4
HA
B
PAGE 8 OF 10
D
D
STEP 7:Following below illustration Assembly FRAME #7.
Using hardware #A, #B, #D connect FRAME #3, FRAME #4 with FRAME #5, FRAME #6
to complete FRAME #7
(FRAME #3)
(FRAME #4)
(FRAME #6)
(FRAME #5)
(FRAME #7)
(FRAME #2)
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
NOTE:In this step, DO NOT tighten any bolt
until you connect all part together
Ø1/4"*60mm - 8pcs
Ø1/4"*40mm - 4pcs
Ø1/4"*15mm - 4pcs
Ø1/4"*15mm - 4pcs
Ø1/4"*40mm - 18pcs
STEP 8:Following below illustration Assembly FRAME #8.
Using hardware #B,#D connect #24 horizontal bar,#21 guard handrail with FRAME #2, FRAME #7 to complete FRAME #8
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB

PAGE 9 OF 10
H
C
wood
NOTE:Tighten all step before using. Thank you
STEP 9:Following below illustration Assembly FRAME #9.
Using hardware #C connect #27,#28,#29,#30 wooden shelf panel and #31 wooden table panel with FRAME #8 to complete FRAME #9
H
C
Ø1/4"*28mm - 26pcs
(FRAME #8)
27
28
29
30
31
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB

COMPLETED LOFT BED
PAGE 10 OF 10
LOFT BED
ASSEMBLY INSTRUCTIONS
MF212219AAB&MF212220AAB