Homeline CL-2 User manual
INSTRUCTION MANUAL
CL-2 Red Crossline Laser
2
Please read this instruction manual before operating this product.
Please store this instruction manual in the carry case for future reference.
CAUTION: Class 2 Laser Product
Do not stare directly into the laser beam from apertures.
Do not disassemble the instrument or attempt to perform any internal servicing
as this will void your warranty. No user serviceable parts included.
Only approved and authorised service technicians can carry out warranty repairs.
SAFETY
3
Carry case
Laser glasses
Batteries
Indoor tripod
General Homeline CL-2
Please ensure the following items are included with your laser.
If anything is missing please contact your retailer.
ITEM CHECKLIST
4
Vertical laser port (x1)
PRODUCT OVERVIEW
Horizontal laser port (x1)
Locking switch
Power / horizontal & vertical line mode
5
CONTROL PANEL
Vertical line mode
Horizontal line mode
6
USING YOUR LASER
Setting Up
Power Supply
Operation
‣Select a place as close as practical to the work site.
Ensure the location is clear of traffic.
‣Place the laser on a level surface such as a bench or mount.
‣The CL-2 is powered by two AA alkaline batteries.
‣To enable self levelling slide the locking switch to the
“unlocked” position.
‣Press the line mode buttons on the control panel to activate
the horizontal and vertical beams.
7
CARE AND MAINTENANCE
‣This is a precision instrument and should always be transported
within the carry case provided.
‣Always turn the on/off lock to “off” when transporting the unit.
‣Whenever possible, store the instrument in a dry, shady location.
‣The CL-2 should be calibrated every 6 months, if ongoing accurate
levelling is required or an impact has occurred.
‣The operator should check the CL-2 for accuracy before precision
levelling is attempted.
‣Clean the instrument with a dry, soft cloth after use in dusty, damp
or wet conditions before storing.
‣Smudges and fingerprints may be removed with a damp tissue
or a soft, lint-free cloth.
8
WARRANTY
The General Homeline comes with a 1 year manufacturers warranty.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Separate to the above Australia Consumer Law, Spot-on oers a global warranty.
Customer Support
To assist you with any queries or technical questions please contact the
customer support line: 1300 658 338
30 Day Free Service
If your laser is out of calibration within the rst 30 days of purchase you
are entitled to a free calibration adjustment. For more information please
contact your retailer or Spot-on.
9
SPECIFICATIONS
Specications General Homeline CL-2
Product code 70000
Warranty 1 Year
Accuracy ±4mm at 10m
Range 20m
Levelling range ±4°
Laser class 2 Red
Battery life 6 hours
Battery type 2x AA
Vertical lines 1
Horizontal lines 1
Weight (kg) 0.40
Dimensions (mm) 170x120x120
10
NOTES
11
www.spoton.com.au
Table of contents
