Homerve Es Unico HB785 User manual

1/ 16
Manual for 4-in-1 hand blender
HB785
Es Ú nico, a brand of Homerve Tech. Co. Ltd.

2/ 16
Contents
Page 3. Safety Measures
Page 6. Know Your Es Ú nico Blender
Page 7. Assembly & Operation
Page 14. Care and Cleaning
Page 16. Warranty

3/ 16
SAFETY MEASURES
We at Homerve are very safety conscious. We design and manufacture
consumer products with the safety of you, our valued customer, foremost in
mind. In addition, we ask that you exercise a degree of care when using any
electrical appliance and adhere to the
following precautions:
General:
Incorrect use of this appliance may cause personal injury and damage
Use for its intended purpose only. The manufacturer is not responsible
for any injury of damage resulting from incorrect use or handling (see
also Warranty).
For domestic use only. Not for outdoor or commercial use..
For connection to 110V only.
Never submerge the motor, cord or plug in water.
Never touch the working appliance, cord or plug with wet or damp
hands.
Do not expose to direct sunlight, high temperatures, dust or corrosive
substances.
Keep the appliance under constant supervision while in use. Keep an eye
on children.
The appliance contains sharp parts-keep out of the reach of children.
Use only accessories supplied with the appliance or those recommended
by manufacturer.
The appliance is not to be used by persons with reduced sensitivity,
physical or mental disabilities or persons who are unable to use the
appliance, unless supervised or instructed by a person responsible for
their safety.

4/ 16
Use
Do not use for boiling liquids or very hot food. Make sure that the food is
at a low temperature to avoid skin injury if food splashes.
Never process ICE or other hard foods such as coffee beans, rice, frozen
foods, spices, cereal, or chocolate bars in the chopping bowl as damage
to the blades may result.
Always add liquid when blending vegetables or fruit.
Do not run continuously for more than 3 minute at a time and only wait
until the unit is cooled to room temperature before performing next
operation cycles. When turbo is used, do not run over 1 minute at a time.
Please note that the blade may still rotate for a while after you switch off
the appliance.
Avoid touching the sharp blades during use and when cleaning the
appliance!
Cord and Plug
Do not let the cord hang out over the edge of the work surface.
Check that it is not possible to pull or trip over the cord or any extension
cord.
Keep the cord and appliance away from heat sources, hot objects and
naked flames.
Disconnect plug from socket before cleaning and if not in use. Avoid
pulling the cord when removing the plug from the socket. Instead, hold
the plug.
Ensure that the cord is fully extended.
The cord must not be twisted or wound around the appliance.
Check regularly that neither cord nor plug is damaged and do not use if

5/ 16
they are, or if the appliance has been dropped or damaged in any other
way.
If the appliance, cord or plug has been damaged, have the appliance
inspected and if necessary repaired by an authorized repairer. Never try
to repair the appliance yourself. Please contact the store where you
bought the appliance or repairs under the guarantee. Unauthorized
repair or modifications to the appliance will invalidate the warranty.

6/ 16
Know Your Es Único Blender
A. Speed Dial
B. Low/Turbo Power Button
C. Motor Body
D. Release Button
E. Stainless Steel Blending Shaft
F. Blending Blade
G. Food Processor Lid
H. Food Processor
I. Food Processor Blade
J. Whisk
K. Whisk Gear Box
L. Blending Jug

7/ 16
Assembly and Operation
Before First Use
Remove any packaging material and promotional labels. Wash blending shaft,
food processor bowl, food processor lid, food processor blade, whisk, and
blending jug in warm soapy water. Rinse and dry thoroughly. Ensure no water
remains inside the blending shaft to avoid water running into the motor body
when reattached.
STICK BLENDER
TO ATTACH THE BLENDING SHAFT
Hold the blending shaft with the blades down, and align the top end of the
blending shaft with the corresponding end of the motor body and push until
the blending shaft ‘clicks’ and locks onto the motor body. Always ensure
blending shaft is dry with no water left inside before reattaching.
TO USE AS A STICK BLENDER
Ensure the blending shaft is assembled to the motor body as detailed above.
1. Place food to be processed into the blending jug provided (or a sufficiently
large mixing bowl or saucepan). When blending in jug, ingredient should be
sufficient enough to reach the blade and should not above maximum line.
2. Insert the plug into a 110/120V power outlet.

8/ 16
3. By turning the speed control dial at the top of motor body, select a speed
between 1 and 6. We suggest you start from a low speed.
Low Speed : 1
High Speed : 6
Max Speed: Turbo
Low & High speed is powerful enough for fruits, vegetables and herbs. Use
Turbo when extra power is required or when you need to speed up
processing.
4. Place the blending shaft as deeply as possible into the blending jug and
press the switch to turn the stick blender on. The button can be held for the
required duration of operation. You may press and release for pulse so as to
avoid over processing.
5. Work through the ingredients in the blending jug with a gentle raising and
lowering motion.
6. When processing has finished switch off the motor by releasing the trigger
switch and remove the power plug from the power outlet.
7. Ensure the blade has completely stopped before lifting the stick blender out
of the blending jug.
TO DETACH THE BLENDING SHAFT
Ensure the switch is released and unplug the power plug from the power
outlet. Hold the motor body with one hand and using thumb and finger of the
other hand, press on the two EJECT buttons on either side of the motor body.
Pull the motor body away from the blending shaft to detach.
RECOMMENDATOINS WHEN USING AS A STICK BLENDER
•The stick blender mixes foods and liquids rapidly, therefore it is easy to

9/ 16
over-process. Remember to periodically release the switch and check food
throughout operation.
•The blending shaft allows for hot food to be processed directly in the
saucepan. This makes blending soups and sauces very easy. For safety reasons,
remove the saucepan from the heat source before processing.
•Ensure the motor body of the appliance and power cord are kept away from
any heat source.
•When pureeing and blending, cut food into uniform sizes. This will ensure
smooth and consistent results.
•Warm all liquids to be added to soups and purees, this will ensure even
blending.
•Place the blending jug on the anti-slip mat during blending. This will keep
the blending jug stable.
•Do not operate the stick blender continuously for more than 1 minute.
Allow the motor to rest for 1 minute between each use.
•DO NOT place stick blender in chopping bowl to process ingredients.
If food becomes lodged around the blending blade or in the blade guard,
follow these safety instructions:
1. Release the trigger switch and unplug the power plug from the power
outlet.
2. Use a spatula to carefully dislodge the food. Do not use fingers as the
blending blade is sharp.
3. After the food has been removed and blades are clear, plug the appliance
back into the power outlet and continue blending.

10 / 16
Food Processor
TO ATTACH FOOD PROCESSOR BLADE, BOWL AND LID
1. Place the chopping blade onto the metal pivot pin in the base of the
chopping bowl.
2. Place the food inside the chopping bowl. Do not exceed the maximum
marking.
3. Place the lid onto the chopping bowl. Twist until it is locked.
4. Align the motor body with the chopping bowl lid and push down until the
motor body ‘clicks’ into place. Ensure the chopping bowl lid is dry with no
water left inside before reattaching.
TO USE THE FOOD PROCESSOR
Ensure the chopping bowl is completely and properly assembled.
1. Place food to be processed into the chopping bowl. Do not exceed the
'MAX' marking on the chopping bowl.
2. Insert the plug into a 110/120V power outlet.
3. By turning the speed control dial at the top of motor body, select a speed
between 1 and 6.
Low Speed : 1
High Speed : 6
Low & High speed is powerful enough for fruits, vegetables and herbs. Use
Turbo when extra power is required or when you need to speed up
processing.
4. Press the switch to turn on. The button can be held for the required
duration of operation. Use pulse to avoid over processing.

11 / 16
5. When processing has finished switch off the motor by releasing the switch
and remove the power plug from the power outlet.
6. Ensure the blade has completely stopped before removing the lid from
the bowl. Carefully remove the blade and use a spatula to scrape off any
attached food back into the bowl. Use the spatula to remove food from the
chopping bowl. Never touch the blade.
TO DETACH THE BOWL AND LID
Ensure the trigger switch is released and unplug the power plug from the
power outlet.
Hold the motor body with one hand and using thumb and finger of the other
hand, press on the two EJECT buttons on either side of the motor body. Pull
the motor body away from the bowl lid to detach.
RECOMMEDATIONS WHEN USING THE FOOD PROCESSOR
1. Do not operate the food processor when empty.
2. The anti-slip mat keeps the food processor stable, however it is
recommended during processing to hold the motor body with one hand
and the bowl and lid with the other.
3. When processing, cut food into uniform sizes to ensure quicker, even and
more consistent results.
4. To avoid damage to the chopping/mixing blade, do not process, or grind
hard items such as frozen foods, ice, cereals, rice, spices, chocolate bars or
coffee beans.
5. DO NOT process boiling or hot foods in the bowl.
6. NEVER remove the blade from the chopping bowl before food processing
is completed.
7. The food processor blends foods and liquids rapidly, therefore it is easy to
over process. Remember to periodically release the switch and check food
throughout.

12 / 16
Whisk
TO ATTACH THE WHISK
Insert the stainless steel whisk part to the black gear box.
Align the top end of the whisk gearbox with the corresponding end of the
motor body and push until the whisk ‘clicks’ and locks onto the motor body.
Ensure the whisk gearbox is dry with no water left inside before re-attaching.
TO USE THE WHISK
Ensure the whisk is completely and properly assembled.
1. Place food to be whisked into the blending jug or a sufficiently large
mixing bowl or container.
2. Insert the plug into a 110/120V power outlet.
3. By turning the speed control dial at the top of motor body, select a speed
between 1 and 6.
Low Speed : 1
High Speed : 6
Max Speed: Turbo
4. Place the whisk into the blending jug and press the switch to turn the whisk
on. The button must be held for the required duration of operation.
5. Move the whisk through the ingredients in the blending jug with a gentle
raising and lowering motion until desired texture is achieved.
6. When whisking has finished, switch off the motor by releasing the switch
and remove the power plug from the power outlet.
7. Ensure the whisk has completely stopped rotating before lifting the whisk
out of the blending jug.

13 / 16
TO DETACH THE WHISK
Ensure the switch is released and unplug the power plug from the power
outlet.
Hold the motor body with one hand and using thumb and finger of the other
hand, press on the two EJECT buttons on either side of the motor body. Pull
the motor body away from the whisk to detach.
RECOMMENDATIONS WHEN USING THE WHISK
•Do not allow the whisk to hit the bottom or sides of mixing bowl while the
appliance is in operation, as this may damage the whisk.
•To incorporate air into the ingredients when whisking, use a sufficiently
deep, wide container and move the whisk through the ingredients with a
gentle raising and lowering action.
•Place the mixing bowl on a damp cloth during whisking. This will keep the
mixing bowl stable.
•Always use fresh chilled cream and fresh eggs at room temperature to
achieve greater and more stable volume when whisking.
•Always ensure the whisk and mixing bowl are completely clean and free of
fat before whisking egg whites.
•It is recommended to use the highest speed when whisking egg
whites and cream.

14 / 16
CARE & CLEANING
Motor body
Remove the power plug from power outlet before cleaning. To remove any
food residue, wipe the motor body and cord with a damp cloth only. Do not
use abrasive cleaners or steel wool. Never immerse the motor body in water
or any other liquid. Do not place motor body in dishwasher.
Blending Shaft
Remove the power plug from power outlet before cleaning. Remove the
motor body from the blending shaft. The blending shaft can be hand washed
in hot soapy water, rinsed and dried thoroughly after each use. Do not use
abrasive cleaners or steel wool.
QUICK WASH:
1. With the motor body attached or removed, rinse the blending shaft and
blending blade under running water.
2. Between each processing task, with the motor body attached, place the
blending shaft and blending blade only into a jug of water and press the
trigger switch to turn on for 5 seconds. This will remove any food on the
blending blade and allow you to continue onto the next processing task.
Food Processor
Remove the power plug from power outlet before cleaning. Remove the
motor body from the bowl lid, and then remove the bowl lid and blade from

15 / 16
the bowl. The food processor bowl, lid and blade should be hand washed in
hot soapy water, rinsed and dried thoroughly after each use. Alternatively, the
bowl and blade can be washed in the dishwasher. Do not wash the chopping
bowl lid in the dishwasher. Do not use abrasive cleaners or steel wool.
Whisk
Remove the power plug from power outlet before cleaning. Remove the
motor body from whisk. The whisk can be hand washed in hot soapy water,
rinsed and dried thoroughly after each use. Alternatively, the whisk can also
be washed in the dishwasher. Do not use abrasive cleaners or steel wool.
Remove the whisk from the whisk gearbox before placing in the dishwasher.
NOTE
The whisk gearbox is not dishwasher safe.
Blending Jug
The blending jug can be hand washed in hot soapy water, rinsed and dried
thoroughly after each use. Alternatively, the blending jug can also be washed
in the dishwasher. Do not use abrasive cleaners or steel wool.

16 / 16
WARRANTY
This appliance is under 3-year warranty. If appliance is damaged or faulty,
contact us through the store where you ordered this appliance.
The warranty does not apply:
if the above instructions have not been followed
if the appliance has been interfered with
if the appliance has been mishandled, subjected to rough treatment, or
has suffered any other form of damage
if the appliance is faulty due to faults in the electricity supply.
Due to the constant development of our products in terms of function and
design, we reserve the right to make changes to the product without prior
warning.
Customer satisfaction is always our top priority. Please make sure you
contact us if there is any problem with the appliance or if you have any
question using it. We will do our best to solve the problem and your
concerns.
Thanks for choosing Es Ú nico products!