Honeywell Home VisionPRO 8000 Smart Operation manual

PRODUCT DATA
33-00096-05
VisionPRO® 8000 Smart
Thermostat
APPLICATION
The VisionPRO® 8000 Smart thermostat features an
effortless, 7-Day programmable touchscreen thermostat
that provides control of temperature and one of the
following: humidification, dehumidification, or ventilation.
Up to 3 Heat/2 Cool heat pump systems or up to
2 Heat/2 Cool conventional systems are supported in
residential and commercial applications.
FEATURES
• Thermostat acquires weather data through either a
wired sensor or an Internet connection
•U1Terminals
One set of dry contacts (U1) that are configurable for
one IAQ product, such as a Humidifier, Dehumidifier or
Ventilator.
• Thermostat S1, S1
Configurable S1 Terminals can be configured for a
wired indoor, wired outdoor, or discharge air sensor.
• On-board Humidity sensor
• Customizable Service Reminders
Set up to 10 service reminders. Choose from the pre-set
options or customize your own. Reminders can be
based on date or the outdoor temperature.
• Selectable for Residential and Light Commercial
Applications
One thermostat does it all to meet the needs of Resi-
dential and Light Commercial applications. Simply
select Residential or Commercial during the installer
setup. If Commercial is selected, the thermostat will use
commercial language, meet building codes and offer
365 day holiday scheduling.

VISIONPRO® 8000 SMART THERMOSTAT
333-00096—05
SPECIFICATIONS
Thermostat Description:
Power Consumption of TH8321:
Backlight on: 1.48 VA
Backlight off: 0.88 VA
Temperature Setting Range:
Heating: 40 to 90 °F (4.5 to 32 °C).
Cooling: 50 to 99 °F (10 to 37 °C).
Temperature Sensor Accuracy:
± 1.5 F at 70 F (0.75 C at 21.0 C)
Humidification Setting Range:
10% to 60% RH.
Dehumidification Setting Range:
40% to 80% RH.
Humidity Display Range:
0% to 99%.
Humidity Sensor Accuracy:
± 5% RH from 30% to 50% RH at 75 F.
Cool Indication:
VisionPRO® 8000 Smart thermostat displays “Cool On”
when the thermostat turns the cooling on.
Heat Indication:
VisionPRO® 8000 Smart thermostat displays “Heat On”
when the thermostat turns the heating on.
Auxiliary Heat Indication:
VisionPRO® 8000 Smart thermostat displays “Aux Heat On”
when the thermostat turns the auxiliary heat on.
Interstage Differential:
Comfort:
The thermostat keeps the indoor temperature
within 1 degree of the setpoint (droop less control). The
thermostat turns on stage 2 when the capacity on stage
1 reaches 90%.
When the interstage differential is set to 1.0 or higher, the
thermostat stages the equipment based on how far the
indoor temperature is from the setpoint (ISU 303 to
309). See page 16 for more information.
Clock Accuracy: 1 minute per month at 77 °F (25 °C). ± 2
minutes per month over the operating ambient tem-
perature range.
Mounting Means:
Thermostat mounts directly on the wall in the living space
using mounting screws and anchors provided. Fits a
horizontal 2 x 4 in. junction box.
Fig. 1. Dimensions of thermostat in in. (mm).
Feature Description
Powering method •Common wire
System types (up
to 3 heat/2 cool
heat pump and up
to 2 heat/2 cool
conventional)
•Gas, oil or electric heat with air
conditioning
•Warm air, hot water, high-
efficiency furnaces, heat pumps,
steam and gravity
•Cool only
Changeover Manual or Auto changeover
selectable
System setting Em Heat-Heat-Off-Cool-Auto
Fan setting Auto-On-Circ-Follow Schedule
Terminal
Voltage
(50/60 Hz)
Max.
Current
Rating
W - O/B 18 to 30 VAC and
750 mVDC
1.00A
Y (cooling) 18 to 30 VAC 1.00A
G (fan) 18 to 30 VAC 0.50A
W2 - Aux 1 (heating) 18 to 30 VAC 0.60A
Y2 (cooling) 18 to 30 VAC 0.60A
A-L/A (Output) 18 to 30 VAC 1.00A
U1, U1, S1, S1 30 VAC max. 0.50A
M34521
4-15/16 (126)
4-5/8
(118)
1-1/8 (29)
3-5/16 (84)

VISIONPRO® 8000 SMART THERMOSTAT
533-00096—05
SYSTEM INSTALLATION
When Installing this Product...
1. Read these instructions carefully. Failure to follow the
instructions can damage the product or cause a haz-
ardous condition.
2. Check the ratings given in the instructions to make
sure the product is suitable for your application.
3. Installer must be a trained, experienced service
technician.
4. After completing installation, use these instructions
to verify the product operation.
Finding Your Password (Date Code)
You will need the thermostat password to:
• Make changes to Installer Setup
• Perform an Installer Test
• Reset Thermostat to Factory Default Settings
The password (date code) is located on the back of the
thermostat (see Fig. 2)
Fig. 2. Finding thermostat password.
You can also find the password (date code) by pressing
MENU, selecting Dealer Information and then scrolling
down to see the Date Code.
Residential/Résidentiel 1-800-468-1502 http://yourhome.honeywell.com Commercial/Commerciale 1-888-245-1051 http://customer.honeywell.com Honeywell, Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321WF1001
1
1524
M37810A
M35343B
Password
(Date Code)

VISIONPRO® 8000 SMART THERMOSTAT
933-00096—05
Fig. 13. Thermostat wired directly to equipment.
1. Power the thermostat using Rc and C terminals. Refer
to Fig. 14.
Fig. 14. Inserting wires in thermostat terminal block.
Mounting Thermostat on Wallplate
1. If your thermostat has hinges along the bottom and a
button on the top, align the thermostat at the bottom
and snap into place as shown. If you have the
updated model without hinges, line the thermostat
up evenly with the wallplate and push the thermostat
evenly along the sides and bottom to snap it into
place.
Fig. 15. Mount thermostat.
Finding Your Password (Date Code)
to Access Installer Options
You need a password (Date Code) to access Installer
Options. Installer Options allow you to:
• Make changes to the Installer Setup.
• Perform an Installer Test.
• Reset the thermostat to Factory Default settings.
The password (Date Code) is located on the back of the
thermostat. It can also be found by following these steps:
1. Touch Menu.
2. Select Dealer Information.
Fig. 16.
3. Scroll down to see the Date Code.
Fig. 17.
S1
S1
W
Y
G
W2
Y2
A
S1
S1
O/B
Y
G
AUX
-E
Y2
L/A
K
RC
R
U1
U1
U2
U2
C
CONVENTIONAL
HEAT PUMP
S1
S1
W
Y
G
W2
Y2
A
S1
S1
O/B
Y
G
AUX
-E
Y2
L/A
K
RC
R
U1
U1
U2
U2
C
CONVENTIONAL
HEAT PUMP
MCR34022
Dealer Information
Installer Options
MCR35348
TH8321WF1001
Date Code: 1524

VISIONPRO® 8000 SMART THERMOSTAT
33-00096—05 10
Thermostat Password (Date Code)
Fig. 18. Locate password.
The following options are available when you access
Installer Options. For more information on each, press Help
on the thermostat or see Table 1.
Fig. 19.
Make Changes to Installer Setup
1. Touch Menu.
2. Select Installer Options.
Fig. 20.
3. Enter password (date code) and touch Done. See
“Finding Your Password (Date Code) to Access
Installer Options” beginning on page 9 for more
information.
Fig. 21.
4. Select Installer Setup.
Fig. 22.
5. Follow prompts on the screen to select the desired
setup options. See Table 2 for Installer Setup options.
Residential/Résidentiel 1-800-468-1502 http://yourhome.honeywell.com Commercial/Commerciale 1-888-245-1051 http://customer.honeywell.com Honeywell, Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321WF1001
1
1524
M37810A
M35343B
Password
(Date Code)
Scroll to see:
Installer Setup
Installer Test
Reset To Defaults
Device Info
Table 1. Installer Options.
Menu Item Description
Installer Setup Select INSTALLER SETUP to set system
settings one by one.
Installer Test Select INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly.
Minimum off timers are ignored during
the test.
Reset To
Defaults
Select RESET TO DEFAULTS to place all
thermostat settings back to the factory
settings.
Device Info For internal use only.
MCR33976
Installer Options
MCR33977
Enter password
0 0 0 0
MCR34015
Installer Setup
Installer Test