Honeywell lyric round User manual

Lyric Round™Wi-Fi Thermostat
Getting Started

How to use your Lyric thermostat
Turn to set your
desired temperature
HeatingCooling
Home/Away
Weather
Turn on/o
View 6 and
12 hour
forecasts
Set to Home/Away
Turn on/o

How to use your Lyric app
Once your thermostat is configured and connected to your smartphone
or tablet, take advantage of the following features:
Access the
menu
Use shortcuts to
easily activate
your favorite
settings
Set desired
temperature
View weather
forecast
Interested in more Lyric products? Visit lyric.honeywell.com to learn about all
available products connected by the Lyric app.
App is regularly enhanced and may change.
Change mode -
heating, cooling,
or o
Set away

Location Based Temperature Control
Lyric thermostat uses your smartphone’s location to know when you’re
away, and saves you energy. Through geofence technology, it senses
your return and helps make you comfortable upon arrival. You can also
manually override your current setting when you’ll be out for a few hours
by using the Away button on the thermostat or in the app.
Custom Shortcuts
Create custom shortcuts for unique situations or save the shortcuts
you really like and they’ll be available on your app any time you want.
Customizable comfort has never been so simple.
Comfort
View and adjust the humidity levels in your home. Lyric also considers
both humidity and temperature to maintain your comfort, so 72° always
feels like 72°.
Smart Alerts
Push notifications remind you of filter changes, notify you of high and low
humidity levels, and warn you of extreme indoor temperatures.
Adaptive recovery
The Lyric thermostat learns your heating and cooling cycle times to
deliver just the right temperature, right when you want it.
Auto changeover
When enabled, the thermostat automatically selects heating or cooling
depending on the indoor temperature.
Get the most from Lyric
!

For help, contact:
WEB lyric.honeywell.com
EMAIL [e-mail]
PHONE [phone]
SOCIAL Twitter: @Honeywell_Home, Facebook: Honeywell Home
Regulatory information
FCC REGULATIONS
§ 15.19 (a)(3)
This device complies with part 15 of
the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
IC REGULATIONS
RSS-GEN
This device complies with Industry
Canada’s license-exempt RSSs.
Operation is subject to the following
two conditions:
1. This device may not cause
interference; and
2. This device must accept any
interference, including interference
that may cause undesired operation
of the device.
FCC Warning (Part 15.21) (USA only)
Changes or modifications not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.

Lyric Round™Wi-Fi Thermostat
33-00082EFS-03
Home
® U.S. Registered Trademark
® Marque de commerce déposée aux é.-U.
® Marca Registrada en los E.U.A
© 2017 Honeywell International Inc.
Imprimé aux états-Unis
Impreso en EE. UU.
Rev. 06-17 Printed in U.S.A.
Home and Building Technologies
In the U.S.: | Aux États-Unis: | En los EE. UU.:
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
lyric.honeywell.com
Wi-Fi® is a registered trademark
of Wi-Fi Alliance®
Wi-Fi® est une marque déposée
de Wi-Fi Alliance®.
Wi-Fi® es una marca comercial
registrada de Wi-Fi Alliance®.

Quick Start Guide
Lyric Round™ Wi-Fi Thermostat

2
Compatibility
Does not work with electric baseboard heat (120-240V)
Compatible with most other heating, cooling and heat pump systems
Optional: 24 VAC power (“C” wire)
Lyric’s implementation of Apple HomeKit requires 24 VAC power (“C” wire)
For help, contact:
WEB lyric.honeywell.com
EMAIL [e-mail]
PHONE [phone]
SOCIAL Twitter: @Honeywell_Home, Facebook: Honeywell Home

3
AAA
Thermostat Wall plate
Anchors
Screws
Included in your box:
Optional wall cover

4
*Tools you might need
Tools you will need:
To photograph your existing wiring
and access the thermostat app
Home Wi-Fi password
Smartphone
To configure your system
and connect to your smartphone
Honeywell Lyric app
Ballpoint pen
Small flat head screwdriver
Wire stripper*
Phillips screwdriver
Needle-nose pliers*
Drill and
drill bit (7/32")*

5
This document is not a stand-alone guide.
It is best used as a reference with the app.
BEFORE YOU BEGIN
Download the Honeywell Lyric app
on your smartphone.

6
OR
Switch
Breaker box
1Turn power OFF
To protect yourself and your
equipment, Turn off the power at the
breaker box or switch that controls
your heating/cooling system.
2Check that your system is off
Change the temperature on your
old thermostat. If you don’t hear the
system turn on within 5 minutes, the
power is off.
75

7
3Remove the old thermostat’s
faceplate
On most thermostats, you can take
off the faceplate by grasping and
gently pulling or popping it off.
Some thermostats may have screws,
buttons, or clasps.
Do not remove any wires from your
thermostat
Wire nuts
Thick black wires
4Make sure there are no
120-240V wires
Do you have thick black wires with wire
nuts? Is your thermostat 120V or higher?
If you answered yes to either of these
questions, you have a line voltage system
and the Lyric thermostat will not work.
If you are unsure visit
lyric.honeywell.com/support

8
5Take a picture of the old wiring
Be sure to include the letters next to the
terminals where the wires are inserted.
This will be a helpful reference when
wiring your Lyric thermostat.
RC
R
Example
of a jumper
Terminals
6Remove any jumpers
A jumper connects one terminal to
another terminal. It may look like a small
staple or even a colored wire and must
be removed before continuing.
The Lyric thermostat does not need
jumpers.

9
L
C
W2
W
U1
U2
K
G
Y2
Y
R
RC
RH
Terminal Color of wire Terminal Color of wire
Terminal Color of wire
If the wires are in terminals that are not listed, you will need additional
wiring support. Visit lyric.honeywell.com/support/installation to find out if
the Lyric thermostat will work for you.
Check all that apply:
8Record the existing wire configuration
Note the color of the wires that are plugged into your old
thermostat’s terminals. You will need this information to correctly
wire your Lyric thermostat.
7Record if you have wires in the following terminals
Do not include jumpers as part of your count.

10
9Disconnect the wires and
remove old wall plate
Use a screwdriver or a ballpoint pen to
release wires from terminals.
Wrap the wires around your ballpoint pen
to prevent them from falling back into
the wall.
10 Insert the recommended wall
anchors
It is recommended that you use the provided
anchors when mounting your thermostat.
You can use the wall plate to mark where
you want to place the wall anchors.
Drill bit size 7/32”

11
Exposed wire
AAA
11 Check for any paint gaps or screw
holes left by the old thermostat
If you choose to use the optional wall cover
to hide these blemishes, snap the wall plate
to the optional wall cover before screwing
to the wall.
12 Bundle and insert wires through
the clear rubber holder
Guide the wires through the clear rubber
holder on the back of the wall plate.
Make sure at least 1/4-inch of each wire is
exposed for easy insertion into the wire
terminals.

12
13 Review your answer from Step 7
Set the R-switch up or down based on
your answer from Step 7.
R(only)
RC (only)
RH(only)
R
RC
Set the R-Switch
R-Switch
If you checked Insert Wire(s) into Terminal(s)
RC
RH
R
Rc
R
Rc
R
Rc
R
Rc
R
Rc
R
R & RC
R
R & RC
R wire
Rc wire
RH wire
R wire
Rc wire
RH wire
Rc wire

13
14 Firmly connect remaining wires from Step 8
Push each remaining wire into its corresponding terminal (one wire
per terminal) until it is firmly in place. If you misplace a wire, use a
ballpoint pen to push down on the terminals and release the wire.
Gently tug on wires to verify they are secure.
AAA
15 Use the provided screws to
mount the wall plate
Make sure the wall plate is even by
keeping the bubble in the level between
the two lines.

14
OR
Switch
ON
Breaker box
16 Firmly snap the thermostat
into place
The thermostat will glow and display
the Lyric screen for up to three
minutes while it starts up.
17 Turn your power ON
Turn on the power at the breaker box
or switch that controls your heating/
cooling system.