Honeywell VisionPRO Wi-Fi TH8320WF User manual

User Guide
VisionPRO® Wi-Fi Model TH8320WF
Touchscreen Programmable Thermostat

69-2715EF—01 1

Welcome
Congratulations on your purchase of a
Honeywell Wi-Fi touchscreen programmable
thermostat. When registered to Honeywell’s
Total Connect Comfort Solutions, you can
remotely monitor and control the heating and
cooling system in your home or business—you
can stay connected to your comfort system
wherever you go.
Honeywell’s Total Connect Comfort is the
perfect solution if you travel frequently, own
a vacation home, a business or manage an
Investment property or if you are simply looking
for peace of mind.

69-2715EF—01 3
About your new thermostat
Home screen quick reference.....................5
Message center messages.........................6
Connecting to your Wi-Fi network...............8
Registering your thermostat online ...........13
Preset energy-saving schedules...............20
Operation
Setting the clock........................................17
Setting the fan...........................................18
Selecting system mode.............................19
Adjusting program schedules....................21
Overriding schedules temporarily .............22
Overriding schedules permanently ...........23
Setting vacation hold.................................24
Screen Lock ..............................................25
Cleaning the screen..................................26
Setting filter reminder intervals .................27
Unregistering thermostat...........................28
Disconnecting Wi-Fi ..................................29
Special features ........................................30
Setting functions and options....................31
System Setup
System setup ............................................29
Appendices
Frequently asked questions ...................... 37
Troubleshooting.........................................40
Limited warranty........................................45
Table of contents

4 69-2715EF—01
Features of your Wi-Fi thermostat
With your new thermostat, you can:
• Connect to the Internet to monitor and control your heating/cooling system
• View and change your heating/cooling system settings
• View and set temperature and schedules
• Receive alerts via email and get automatic upgrades
Your new thermostat provides:
• Adaptive Intelligent Recovery (AIR) - the thermostat learns your system so it
can turn the heat or cool on early to reach your desired temperature at your
desired time.
• Compressor protection - the compressor waits a few minutes before restarting,
to prevent equipment damage.
• Heat/cool auto changeover - the thermostat automatically changes from
heating to cooling to keep you comfortable.

69-2715EF—01 5
Home screen quick reference
Once your Wi-Fi thermostat is installed, it will display the home screen. Portions of this
display will change depending on how you are viewing it. To change settings, simply press
the appropriate area lightly with your finger.
Unless you change the lighting function, the screen is always lit at low intensity. When you
touch the screen, the screen brightens.
Set clock
Message center
Select fan mode
Select system mode
Program schedules
Override schedule
Wi-Fi status
Schedule is on (does not
display when off)
Additional settings
Lock screen for cleaning
M31565
MORE
Inside

6 69-2715EF—01
Message center messages
The Message Center at the top of the screen communicates Wi-Fi connection and
registration status. It also displays the MAC ID and MAC CRC for registering the
thermostat at mytotalconnectcomfort.com
Displayed before you begin Wi-Fi setup.
Displayed while connecting to the Wi-Fi network.
Displayed after connecting to the Wi-Fi network.
[Wi-Fi network name] Displayed when connected to the Wi-Fi network.
Displayed when Wi-Fi connection is complete.
Displayed when the thermostat fails to establish a connection
to the Wi-Fi network.
Displayed when the thermostat is connected to the Wi-Fi
network but not registered at mytotalconnectcomfort.com
Displays the thermostat’s MAC ID and MAC CRC for
registering at mytotalconnectcomfort.com
[Found on your ID card]
[Found on your ID card]

69-2715EF—01 7
Message center messages
Displayed when the thermostat is registered at
mytotalconnectcomfort.com
Displayed when the thermostat is removed from your Total
Connect Comfort account.
Wi-Fi signal strength. Displayed when the thermostat
is connected to the Wi-Fi network and registered at
mytotalconnectcomfort.com
Displayed if there is no Wi-Fi signal.
Displayed if the home Wi-Fi password is entered incorrectly.
Displayed if no IP Address is supplied by the router.
Displayed if there is no Wi-Fi signal.

8 69-2715EF—01
Connecting to your Wi-Fi network
Connect your wireless device to your home network. Any of these device types will work:
• Tablet (recommended)
• Laptop (recommended)
• Smartphone
If you get stuck... At any point in this process, restart the thermostat by removing
the thermostat from the wallplate, wait for 5 seconds, and snap it back into place. Go
to Step 1 in this procedure, starting on page”Connecting to your Wi-Fi network” on
page 9.

69-2715EF—01 9
Connecting to your Wi-Fi network
1 Connect to your thermostat.
1a Make sure the thermostat message center displays
Wi-Fi SETUP
1b On the wireless device (tablet, laptop,
smartphone), view the list of available Wi-Fi
networks.
1c Connect to the network called
NewThermostat_123456 (the number will vary).
Note: If you are asked to specify a home, public, or
office network, select Home Network.
M31566
MORE
Inside
Message Center

10 69-2715EF—01
Connecting to your Wi-Fi network
2 Join your home network.
2a Open your web browser to access the
Thermostat Wi-Fi Setup page. The browser
should automatically direct you to the correct
page; if it does not, go to http://192.168.1.1
2b Find the name of your home network on this
page and select it.
Note: Some routers have enhanced features such as
guest networks; use your home network.
2c Complete the instructions for joining your Wi-Fi
network and click on the Connect button.
(Depending on your network setup, you may see
an instruction such as Enter Password for your home network.)
Note: If you did not correctly connect to the thermostat, you may see your home
router page. If so, return to Step 1.
M31567

69-2715EF—01 11
Connecting to your Wi-Fi network
Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup
page:
• Try performing a network rescan by pressing the Rescan button. This is helpful in
areas with a lot of networks.
• If you are connecting to a hidden network, then enter the network SSID in the
textbox, select the encryption type from the drop down menu, and click on the
Add button. This manually adds the network to the top of the list. Click on the new
network in the list and enter the password if necessary. Click on Connect to join the
network.

12 69-2715EF—01
Connecting to your Wi-Fi network
M31568
MORE
Inside
3 Make sure your thermostat is connected.
The message center on your thermostat
will now display CONNECTING… for up
to 30 seconds.
3a Look at the thermostat display. Verify
that the message center displays one
of the following:
CONNECTION SUCCESSFUL
JOINED: [WI-FI NETWORK NAME]
YOU ARE ALMOST DONE
REGISTER AT TOTAL CONNECT
If you don’t see these messages,
see page 8.
To register online for remote access to
your thermostat continue on page 13.
Note: If you see CONNECTION
FAILURE or Wi-Fi SETUP in the
message center, confirm you
correctly entered your home
network password in step 2.

69-2715EF—01 13
Registering your thermostat online
M31570
To view and set your Wi-Fi thermostat remotely,
you must have a Total Connect Comfort account.
Follow the instructions below.
1 Open the Total Connect Comfort web site.
Go to www.mytotalconnectcomfort.com

14 69-2715EF—01
Registering your thermostat online
2 Login or create an account.
If you have an account, click Login
– or –
click Create An Account
2a Follow the instructions on the screen.
2b Check your email for a response from
My Total Connect Comfort. This may
take several minutes.
Note: If you do not receive a response,
check your junk mailbox or use an
alternate e-mail address.
2c Follow activation instructions in the
email.
2d Log in.
M31571

69-2715EF—01 15
Registering your thermostat online
3 Register your Wi-Fi thermostat.
After you are logged in to your Total Connect Comfort account,
register your thermostat.
3a Follow the instructions on
the screen. After adding your
thermostat location, you must
enter the thermostat’s unique
identifiers:
• MACID
• MACCRC
Note: These IDs are listed on
the Thermostat ID Card included
in the thermostat package. The
IDs are not case sensitive.
® U.S. Registered Trademark.
© 2012 Honeywell International Inc.
69-2723EFS—01 M.S. 04-12
Printed in U.S.A.
HONEYWELL MODEL: TH8320WF
MAC ID: MAC CRC:
69-2723EFS-01
Thermostat ID Card
Use the MAC ID and CRC ID to register
this product at mytotalconnectcomfort.com
Carte d’identification de thermostat
Utilisez l’identication MAC et l’identication CRC pour
enregistrer ce produit à mytotalconnectcomfort.com
Tarjeta de identificación del termostato
Utilice la identicación MAC y la identicación CRC para
inscribir este producto en mytotalconnectcomfort.com
MAC ID MAC CRC

16 69-2715EF—01
Registering your thermostat online
3b Notice that when the thermostat
is successfully registered,
the Total Connect Comfort
registration screen will display a
SUCCESS message.
In the thermostat message
center you will see:
CONGRATULATIONS
SETUP COMPLETE

69-2715EF—01 17
MORE
1 Press CLOCK to display setting arrows.
2 Press sor tto adjust the time. (You can
advance the time more quickly by holding the
sor tbuttons.)
3 Press DONE to save and exit (or press
CANCEL to exit without changing the time).
Note: When registered to Total Connect
Comfort the thermostat automatically sets
the time on the thermostat as well as
automatically adjusting for Daylight Savings
Time.
Note: To change the current week day format,
see “Setting functions and options” on page
31.
Setting the clock

18 69-2715EF—01
1 Press FAN to select fan operation.
2 Press FAN again to select ON or AUTO (toggle
to re-select). The selected option blinks.
3 Press DONE to save setting. Your selection
appears under FAN.
ON:Fan is always on.
AUTO:Fan runs only when the heating or
cooling system is on.
CIRC: Fan runs randomly approximately
35% of the time. Use this setting for
improved air circulation or for more
efficient central air cleaning when you do
not want the fan running continuously.
MORE
Inside
MCR31582
Setting the fan

69-2715EF—01 19
Selecting system mode
Note: The AUTO and EM HEAT
system settings may not
appear, depending on how
your thermostat was installed.
1 Press SYSTEM to display options.
2 Press SYSTEM again to select an option.
You may need to press two or three times to
make a selection—the selected option blinks.
3 Press DONE to save setting.
Possible system modes:
HEAT:Controls only the heating system.
COOL:Controls only the cooling system.
OFF:Heating/cooling systems are off.
AUTO:Selects heating or cooling
depending on the indoor temperature.
EM HEAT (heat pumps with aux. heat):
Controls auxiliary/emergency heat.
Compressor is locked out.
MORE
Inside
MCR31583