Honeywell WebStat T7350 User manual

63-2606
T7350
PDA Configuration
QUICK START GUIDE
SETUP
1. Connect PDA to 50000083-001 Thermostat
Interface Module (TIM) using PDA serial cable.
2. Ensure the PDA serial cable and the PDA
remain connected.
3. Connect T7350 to TIM using RJ-45 cable.
Novice Navigation
The standard (novice) mode guides the user through
the essential configuration screens. Next and Back
buttons guide the user from screen to screen.
NOTE: The current desired T7350 configuration
determines the context of screen displays.
See Fig. 1 through 5 for sample screens.

63-2606 2
Fig. 1. Opening screen.
Table 1. Opening Screen Options.
Function
TIM
Req’d Description
Override X Manually override digital and analog
outputs. Enable/Disable output delays.
Set Clock X Set T7350 real time clock date/time.
Temp SetPts X Upload current setpoints. Modify values
and download to the T7350.
Upload Config X Upload configuration and display results.
New Config Create new configuration set.
Monitor Data X Monitor T7350 diagnostic data.
Holidays X Upload, modify, download Holiday
schedule
Wkly Schedule X Upload weekly schedule. Select, create
or save schedule and download.
Select Existing
Config
Select an existing configuration set and
display the results.

3 63-2606
Table 2. Novice Navigation Screens.
Fig. 2. Summary and Inputs.
Function Description
Summary Basic data with access to functions such as
Save and DownL(oa)d.
Inputs Configure T7350 sensor inputs.
Cooling Configure cooling parameters.
Heating Configure heating parameters.
Outputs Configure T7350 outputs.
Fan Configure fan control.
Wkly Schedule Select, create, save, name weekly schedule.
SetPoints Configure temperature setpoints.

63-2606 4
Fig. 3. Cooling and Heating.
Fig. 4. Outputs and Fan.
Fig. 5. Weekly Schedule and Setpoints.

5 63-2606
Advanced Navigation
Advanced navigation is designed for expert level
users. It allows direct access to any thermostat
configuration screen:
1. Tap either the title tab or the silk screen menu
icon (see Fig. 6).
2. The tool replaces the title tab with the Advanced
Navigation menu (see Fig. 7).
3. Perform desired tasks. See Table for available
functions.
Fig. 6. Tap the menu icon.
Fig. 7. Advanced Navigation menu.

63-2606 6
Table 3. Advanced Functions.
Menu Function Description
File New Create named T7350 configuration.
Open Select and display existing T7350
configuration.
Save Save current configuration with
existing name.
Save As Save current configuration with new
name.
Delete Delete an existing configuration.
Com
(requires
TIM)
Download Download current configuration to
T7350.
Upload Upload configuration from T7350
and display the details.
Monitor Monitor T7350 diagnostic data.
Set Clock Set real-time clock date and time.
Calibrate Monitor and calibrate room
temperature.
Override Manually override outputs. Enable/
Disable output delays. Disables
minimum on/off time delays for relay
outputs and sequential start delay.

7 63-2606
Set Home Return to opening screen. Saves
existing configuration first.
Summary Display summary screen. See Fig. 2.
Inputs Configure sensor inputs.
Outputs Configure output options.
Cooling Configure cooling mode parameters.
Heating Configure heating mode parameters.
Fan Configure fan options.
SetPoints Configure and download
temperature setpoints.
Display Configure T7350 display and user
interface parameters.
Dehumidification Configure dehumidification high
limits.
EnergyMgmt Configure energy management
parameters, including: power
restoration sequential start delay
and demand limit control bump.
LoopTuning Configure PID parameters.
Table 3. Advanced Functions. (Continued)
Menu Function Description

63-2606 8
FREQUENTLY ASKED QUESTIONS
How do I exit the configuration application?
Tap the silk screen Home, or press a dedicated PDA
function pushbutton. The current configuration is
saved and the configuration application is closed.
I do not like some of the default configuration
settings. How do I change them?
Default settings exist for: basic thermostat (e.g.: °F/°C),
Weekly Schedule, and Holiday Schedule configura-
tions. Use the following command sequence: Opt,
User Pref, Change Lock Defaults to No, tap OK.
The user can now modify and save defaults.
Sched Wkly Sched Select, create, save, or download a
weekly schedule.
Recovery Configure startup recovery
parameters.
Holiday Select, create, save, or download a
holiday group.
DayLightSav Configure Daylight Saving start and
end date/time.
Opt User Pref Set preferences, including:
units (°C/°F), OS alert message (on/
off), and lock defaults (on/off).
About Application version number and
contact information.
Table 3. Advanced Functions. (Continued)
Menu Function Description

9 63-2606
How do I return to the Application Opening
Screen?
Use the following command sequence: tap the title
tab, Set, Home. Note: All opening screen functions
are available through the Novice or Advanced
screen navigation.
How do I upload a thermostat configuration into an
existing config file name?
Use the following procedure to save an upload over
top of an existing configuration:
1. Upload the configuration from the T7350.
2. Delete the existing file using: File, Delete.
3. Save the upload data using: SaveAs.
How do I connect the PDA Configuration Tool to
the T7350 Thermostat?
Use the Honeywell TIM (part no.: 50000083-001) to
facilitate the connection between the PDA serial
cable DB9 (not included) and the T7350 RJ Jack.
How do I copy/modify an existing configuration
file?
Use the following procedure:
1. Load the existing configuration: File, Open,
[existing configuration name].
2. Save file under new name: SaveAs, [enter new
name], SaveAs.
3. Make appropriate configuration changes.
4. Save the new file: File, Save.
How do I exit the output manual override mode?
While in manual override mode, the lower left corner of
the PDA screen displays “Manual Override”. Tap
anywhere on the screen and the override mode is
deactivated in 60 seconds.

63-2606 10
Is it possible to install the configuration tool on a
PDA not listed on the release note compatibility
list?
No.
I drained the PDA batteries and lost my saved
configuration files. Is it possible to restore these
files from a saved location?
One of two methods can work:
— Uploading the configuration from a properly
configured T7350. This recovers all but the given
configuration name and corresponding holiday
names.
— Regular use of the HotSync®function to back up
data to a PC saves T7350 configurations. In the
case of a battery failure, the Palm™ Desktop
application automatically restores the saved
configurations at the next HotSync event from the
StatDbFile-HIRW.PDB file.

11 63-2606

63-2606 B.B. 12-03
Copyright © 2003 Honeywell International Inc.
All Rights Reserved www.honeywell.com
Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.
Automation and Control Solutions
Honeywell International Inc. Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Scarborough, Ontario
M1V 4Z9
HotSync is a registered trademark of PalmSource, Inc.
Palm is a trademark of PalmSource, Inc.