Honiture G20 Pro User manual

User Manual
Robot Vacuum Cleaner
G20 Pro

Language
English
Deutsch
Italia
Français
Español
日本语
02-28
29-55
56-82
83-110
111-136
137-163

EN-2
UK:[e-mail] US&CA:[email protected]om AU:[e-mail]
Contents
1. Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 03
2. Packing List - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 06
3. Basic Paramters - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 07
4. Product Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 08
5. Preparation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
6. Use Instructions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
7. Routine Maintenance- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
8. Common Problems - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26
9. Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28

EN-3
UK:[e-mail] US&CA:[email protected]om AU:[e-mail]
1.Safety Instructions
Use Restrictions
• This machine is only used for floor cleaning at home. Please do not use it outdoors (such as an open balcony), in non-ground areas (such as a
sofa), and in commercial or industrial environments.
• Do not use the machine in suspended environments without protective fences, such as duplex floors, open balconies, and the top of the
furniture.
• Do not use the product in an environment where the temperature is above 40° C or below 0° C, or there are liquids and viscous objects on the
ground.
• Hang up the ground cable at home before use to avoid dragging the cable when the machine is running.
• Put away the fragile objects and sundries (such as vases and plastic bags) on the ground. Otherwise, the machine may be blocked or a slight
collision may cause damage to valuables at home.
• Keep the machine away from people (including children) with physical, mental or sensory impairments.
• Do not allow children to use the machine as a toy. Please keep children and pets away from the machine when the machine is running.
• Keep the cleaning brush at a place that cannot be reached by children.
• Do not place any object (including children and pets) on the stationary or moving machine.
• When the machine is working, keep the hair of humans or pets or fingers far away from the suction port of the machine.
• Do not use the machine to clean-burning objects, such as unextinguished cigarette butts.
• Do not use the machine to clean long-haired carpets. Some dark carpets may not be cleaned normally.
• Do not use the machine to vacuum hard or sharp objects, such as decoration waste, glass, and iron nails.
• Please clean or maintain the machine and docking station when the machine is powered o󽗈 or when the power supply is disconnected.
• Do not use a damp cloth or any liquid to wipe any part of the machine.
• Do not use the mopping function on the carpet or the top of the furniture.
• Please follow the instructions in this manual when using the machine. The user should be liable for any loss and injury caused by improper use.

EN-4
UK:[e-mail] US&CA:[email protected]om AU:[e-mail]
Battery and Charging
• Do not use any third-party batteries, docking stations, or chargers.
• Do not disassemble, repair, or modify the battery or docking station without permission.
• Do not place the docking station near heat sources, such as radiators.
• Do not use a damp cloth or wet hands to wipe or clean the docking station shrapnel.
• Dispose of used batteries properly, and send them to professional recycling agencies.
• If the power cord is damaged or broken, stop using it immediately and buy a new one through o󽗈cial channels.
• To transport the machine, ensure that the machine is powered o󽗈. It is recommended that you use the original box for packaging.
• If you do not use the machine for a long time, power it o󽗈 and keep it in a dry and cool place. Charge the machine at least once every 3 months
to avoid damage to the battery due to excessive discharge.
Correct Disposal of this product
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.This marking indicates
that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe recycling.
FCC STATEMENT

EN-5
UK:[e-mail] US&CA:[email protected]om AU:[e-mail]
FCC Radiation Exposure Statement
IC Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o󽗈 and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit di󽗈erent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

EN-6
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
2.Packing List
Robotic Vacuum Cleaner Charging Dock Water Tank Dust Bin
Mopping Cloth Holder Mopping Cloth HEPA Filter and Sponge Power Adapter (for Charging Station)
Remote Control with
Battery Magnetic Strip Side Brush Cleaning Brush

EN-7
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
3.Basic Paramters
Robot Specification
Product Model G20 Pro
Dimensions 320 x 320 x 76 mm
Battery 3200 mAh
Rated voltage 14.4V
Rated power 42W
Charging time 300mins
Dust box capacity 450ml
Water tank capacity 250ml
Charging dock Specification
Dimensions 158 x147 x84 mm
Rated input 19V⎓0.6A
Rated output 19V⎓0.6A

EN-8
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
4.Product Introduction
Cleaning Brush
Indicator Light
• Blue light: Normal
• Red light: Error
• Blinking blue light: Connecting network
• Flashing purple light: Looking for a robot
Clean/Power Button
• Short press to start cleaning or pause
• Power on or o󽗈 by pressing this button 3s
Home Button
• Return to Charging dock: Short press
Reset Button
• Use a needle to press this button to reset
the device
Automatic cleaning Start recharging
Direction buttons Pause/ Start
Spot cleaning Edge cleaning
Mop Water Control :
High/Middle/Low Suction level
Remote Control
Note: Set High, robot says 3"Di". Middle, robot says 2"Di". Low, robot says 1"Di".

EN-9
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
1
1
2
2
3
4
5
5
7
6
8
3
4
1. Top Cover
2. Button
3. Bumper
4. Infrared Anti-Collision Sensor
5. Infrared Light Receiving Sensor
1. Cli󽗈 Sensor
2. Charging Contact
3. Universal Wheel
4. Side Brush
5. Battery Cover
6. Drive Wheel
7. Rolling Brush
8. Installation Hole for Mopping Cloth Holder
Sensor and its Structure

EN-10
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
Electric Control Water Tank and Rag Components
Charging Station
1
2
3
4
1. Water Inlet
2. Water Tank Button
3. Mopping Cloth Holder
4. Mopping Cloth
2
1
3
4
1. Power Indicator
2. Signal Transmitting Area
3. Power Interface
4. Charging Pins

EN-11
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
5.Preparation
Precautions
Before starting the vacuum cleaner, clean up wires and sundries scattered on the ground, and remove easy-to-fall, fragile, valuable and potentially
dangerous items. Avoid being entangled, jammed, dragged, or knocked down by the robot，otherwise, personal or property damage may be
caused.
Do not use the robot to vacuum liquid. otherwise it will damage the fan
and a󽗈ect the performance of the robot. When used in a suspended circumstance, it shall be protected by rails to avoid accidental falling or pushing other articles from falling.

EN-12
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
1.Remove the protection material from both sides of the robot
2.Install side brushes
Put the left brush (L) and right brush (R) against the letters L and R on the bottom respectively, move down for “click” to finish installation.

EN-13
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
3.Take out and place the dust collection charging base on a 󽗊at 󽗊oor against the wall and tidy up the redundant wires.
4.Ensure space more than 0.5m from the left and right to the charging base and 1.5m in front of the charging base.
Note:
Ensure a space more than 0.5 m from the left and right of the charging dock and 1.5 m in front of the charging dock.
The power line perpendicular to the ground may be dragged by the robot, resulting in the dock power-o󽗈.
The charging indicator is kept on when electrified.
>0.5m
>0.5m
>1.5m

EN-14
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
5.Do not move the charging base at will, avoid direct sunlight on the charing base.
6.Power on and charging
Hold the button to power on the machine. When the indicator is on, put the robot against the charging dock for charging. The voice of “start
charging” prompts successful charging.
Note:The machine cannot power on in case of insu󽗈cient battery. Please place the robot on the dock to allow automatic power on.
Note:
Sunlight may interfere signals of return-for-charging, and then the robot fails to return back to the charging dock.

EN-15
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
Tap and hold the button for 3 seconds to power on the machine. Then, the power indicator is on, and the vacuum cleaner enters the standby
state. Tap and hold the button for 3 seconds to power o󽗈 the machine.
Note: The robot in the charging state cannot be powered o󽗈.
6.Use Instructions
Power on and o󽗈 the machine
Cleaning/Pause
Charging
Once the machine powers on, tap the button on the robot or use the controller or the smart APP to start cleaning.
Auto mode: After cleaning, the robot automatically returns to the dock for charging.
Manual mode: In the pause state, press the button to activate the “return for charging” mode or use the controller or the smart APP for
charging.
Note:
• The machine cannot clean liquid.
• If the power is lower than 15%, the machine cannot work. Therefore, charge the machine before cleaning.
• If the power is lower than 15% during cleaning, the machine will automatically return back to the dock for charging.
• Before cleaning, tidy up all kinds of wires on the ground (including the power cord of the dock). Otherwise, the machine may drag the wires
while cleaning, which may cause power failures of other electric appliance or damage items or wires.

EN-16
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
The magnetic strip can be set to separate restricted zones (such as washing rooms and kitchens).
Virtual wall
Note:
Fix the magnetic strip to the ground to avoid peeling o󽗈; otherwise a󽗈ecting the result of the visual wall.
Magnetic strip

EN-17
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
Automatic cleaning
Spot cleaning
Upon power on, the machine plans its cleaning route in a zigzag way and finishes cleaning the whole room in an orderly and e󽗋cent manner.
Once cleaning ends, the machine will automatically return to the dock for charging (cleaning mode by default).
Use the button on the controller so that the machine will take itself as a center to sweep a round zone with the diameter of 1.2 m. Upon
cleaning, the robot will automatically return to the starting point and stop work.(The direction key on the smart APP can also be used to manually
control the machine to the cleaning position.)
Cleaned
To be cleaned

EN-18
UK:[e-mail] US&CA:[email protected]om AU:AfterserviceA[email protected]om
Scheduled cleaning
Use the smart APP to set the time for cleaning. The robot will start cleaning automatically at the scheduled time. Upon cleaning, it will return to
the dock for charging (7x24h scheduling supported).