Hooker Furniture 5149-75003 User manual

1/2
ASSEMBLY INSTRUCTION
Item#: 5149-75003 Double Ped Base
Item#: 5149-75004 Double Ped Top w/2-18in Leaves
***Please make sure you have all parts indicated below prior to assembly.
This unit is heavy and can best be assembled with the help of two or more people.
Diagram 1
1. Place the top upside down on a
soft surface to prevent from
scratching.
2. Align locator dowels at mounting
bridge of pedestal to the holes of
top panel.
3. Screw each pedestal and top by
using 4 bolts (B), 4 lock washers
(C) and 4 flat washers (D) tightly
with allen wrench (A) in clockwise
direction. (see diagram 1).
4. Place the rail onto pedestals;
insert bolt (E) with lock washer
(C) and flat washer (D) into holes
on rail of each side and
corresponding holes in pedestal;
Secure the bolt (E) in clockwise
direction with allen wrench (A)
tightly (see diagram 1).
5. Turn the table upright.

2/2
Diagram 2
Diagram 3
Diagram 4
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and
water solution. Polish the finish with soft cloth and an industry recognized furniture polish.
Instruction for the leaves:
1. There is a latch on the bottom of
the top, turn off the latch (see
diagram 2).
2. Pull out the table top as the arrow
direction (see diagram 3).
.
3. Place the leaves on it and push
them together. Then turn on the
latch. (see diagram 3&4)