Hooker Furniture 5165-85001 User manual

1/2
ASSEMBLY INSTRUCTION
Item#:5165-85001 DAVALLE SCROLL CONSOLE
** Please make sure you have all parts indicated below prior to assembly.
ASSEMBLY STEPS:
DIAGRAM 1
1. Locate side posts (A) and center rail(B) in a soft place to prevent them from scratching.
2. Insert full thread bolt (H) into holes of ends of center rail (B). Attach side post(A) to center
rail(B) through full thread bolt (H). Use nut (E), curved washer (G) and tighten them with
spanner wrench (F). See diagram 1.
3. Repeat step 2 to well attach both side posts (A) to center rail (B).

2/2
4. Take out table top (C) and place it upside down in a soft place. Attach top rail of table base (D)
to table top (C) by using bolt (I), lock washer (K) and flat washer (O). Tighten them with allen
wrench (M). See diagram 2.
5. Then use bolt (J), lock washer (K) and flat washer (O) and tighten them with allen wrench (M)
to strengthen side posts (A) and table top (C), see diagram 3.
6. Turn console table upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.