Hoover POWER SCRUB XL User manual

QUICK START GUIDE
X L
321
Fill Clean Water Tank with Water
up to MAX line located on side
of the tank.
Fill Solution Bottle with HOOVER
Solution and slide into back of the
unit.
Attach Handle.
CLICKCLICK
CLICKCLICK
GETTING STARTED
HOW TO USE: MAIN UNIT
SQUEEZE TRIGGER
WASH
RELEASE TRIGGER
DRY
Slowly Push forward and squeeze trigger to wash. Release Trigger and
slowly pull unit back to Dry carpet. Repeat and move to new section.
2
Recline
On/Off
Use pedals to operate.
1
POWER
SCRUB
TM
XL
CARPET & UPHOLSTERY
CLEANER

To Engage Quick Clean Mode, Turn Knob Counter-Clockwise until
engaged. Return to Deep Clean Mode by Turning knob Clockwise
to Starting Position.
321
Saturate stain and scrub.
Attach hose to hose port.
Lift hose cover on nozzle.
HOW TO USE: ABOVE FLOOR
1 2 3 4
Reinsert Brushes and
Press Firmly until
Latches Lock.
Pull to Remove Nozzle
Cover.
To Remove Brushes, press both
tabs on side of foot.
HOW TO USE: CLEANING AND MAINTAINING
Remove Dirty Water
Tank.
1
To Engage Quick Clean Mode, Turn Knob Counter-Clockwise until engaged.
Return to Deep Clean Mode by Turning knob Clockwise to Starting Position.
HOW TO USE: QUICK CLEAN MODE*
Quick
Clean
Mode
Deep
Clean
Mode
961003499-R4