Hoover H-WASH 700 User manual

EN
0

!
2
Thank you for choosing this product.
We are proud to offer the ideal product for
you and the best complete range of home
appliances for your daily routine.
Carefully read this manual for correct and
safe appliance use and for helpful tips on
efficient maintenance.
Only use the washing machine after
carefully reading these instructions. We
recommend you always keep this manual on
hand and in good condition for any future
owners.
Please check that the appliance is delivered
with this instruction manual, warranty
certificate, service centre address and
energy efficiency label. Also check that
plugs, drain hose support hook and liquid
detergent or bleach tray (only on some
models) are included. We recommend you
keep all these components.
Each product is identified by a unique 16-
character code, also called the “serial
number”, printed on the sticker. This can be
found inside the door opening. This code is
a unique code for your product that you will
need to register the product warranty, or if
you need to contact the Customer Service
Centre.
This appliance is marked according to
the European directive 2012/19/EU
on Waste Electrical and Electronic
Equipment (WEEE).
WEEE contains both polluting substances (which
can cause negative consequences for the
environment) and basic components (which can
be re-used). It is important to have WEEE
subjected to specific treatments, in order to
remove and dispose properly all pollutants, and
recover and recycle all materials. Individuals can
play an important role in ensuring that WEEE
does not become an environmental issue; it is
essential to follow some basic rules:
!WEEE should not be treated as household
waste;
!WEEE should be handed over to the relevant
collection points managed by the municipality or
by registered companies. In many countries, for
large WEEE, home collection could be present.
In many countries, when you buy a new
appliance, the old one may be returned to the
retailer who has to collect it free of charge on a
one-to-one basis, as long as the equipment is of
equivalent type and has the same functions as
the supplied equipment.
1. GENERAL SAFETY RULES
2. INSTALLATION
3. PRACTICAL HINTS
4. CLEANING AND MAINTENANCE
5. PORTHOLE EMERGENCY OPENING
6. COMMAND PANEL
7. FIRST MACHINE START-UP
8. VARIOUS SETTINGS
9. DAILY USE
10. DRYING CYCLE
11. TROUBLESHOOTING AND WARRANTY
FOR U.K. ONLY
On receipt of your appliance please
check it carefully for damage. Any
damage found must be reported
to the delivery driver immediately.
Alternatively damage found must be
reported to the retailer within 2 days of
receipt.
Environmental conditions
Contents

!
EN
3
1. GENERAL SAFETY
RULES
!This appliance is intended to
be used in household and
similar applications such as:
- Staff kitchen areas in shops, offices
and other working environments;
- Farm houses;
- By clients in hotels, motels and
other residential type environments;
- Bed and breakfast type environments.
A different use of this appliance
from household environment
or from typical housekeeping
functions, as commercial use by
expert or trained users, is excluded
even in the above applications. If
the appliance is used in a manner
inconsistent with this it may reduce
the life of the appliance and may
void the manufacturer’s warranty.
Any damage to the appliance or
other damage or loss arising
through use that is not consistent
with domestic or household use
(even if located in a domestic or
household environment) shall not
be accepted by the manufacturer to
the fullest extent permitted by law.
!This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.
Children shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
!Children should be supervised
to ensure that they do not play
with the appliance.
!Children of less than 3 years
should be kept away unless
continuously supervised.
!If the supply cord is damaged, it
must be replaced by a special
cord or assembly available from
the manufacturer or its service
agent.
!Only use the hose-sets
supplied with the appliance for
the water supply connection
(do not reuse old hose-sets).
!Water pressure must be between
0.05 MPa and 0.8 MPa.
!Make sure carpets or rugs do
not obstruct the base or any of
the ventilation openings.
!The final part of a washer dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.

!
4
!After installation, the appliance
must be positioned so that the
plug is accessible.
!The appliance must not be
installed behind a lockable
door, a sliding door or a door
with a hinge on the opposite
side to that of the washer
dryer, in such way that a full
opening of the washer dryer
door is restricted.
!The maximum load capacity of
dry clothes depends on the
model used (see control panel).
!The appliance is not to be used
if industrial chemicals have
been used for cleaning.
!Do not dry unwashed items in
the washer dryer.
!Items that have been soiled with
substances such as cooking oil,
acetone, alcohol, petrol, kerosene,
spot removers, turpentine, waxes
and wax removers should be
washed in hot water with an extra
amount of detergent before being
dried in the washer dryer.
!Items such as foam rubber
(latex foam), shower caps,
waterproof textiles, rubber
backed articles and clothes or
pillows fitted with foam rubber
pads should not be dried in the
washer dryer.
!Fabric softeners, or similar
products, should be used as
specified by the fabric softener
instructions.
!Oil-affected items can ignite
spontaneously, especially when
exposed to heat sources such
as a washer dryer. The items
become warm, causing an
oxidation reaction in the oil,
Oxidation creates heat. If the
heat cannot escape, items can
become hot enough to catch
fire. Piling, stacking or storing
oil-effected items can prevent
heat from escaping and so
create a fire hazard.
!If it is unavoidable that fabrics
contain vegetable or cooking
oil or have been contaminated
by hair care products be
placed in a washer dryer they
should first be washed in hot
water with extra detergent -
this will reduce, but not
eliminate, the hazard.
!Remove all objects from pockets
such as lighters and matches.
WARNING:
never stop a washer dryer before
the end of the drying cycle
unless all items are quickly
removed and spread out so that
the heat is dissipated.

!
EN
5
!To consult the product technical
specification please refer to the
manufacturer website.
!The technical details (supply
voltage and power input) are
indicated on the product rating
plate
!Make sure that the electrical
system is earthed, complies
with all applicable law and that
the (electricity) socket is
compatible with the plug of the
appliance. Otherwise, seek
qualified professional assistance.
!The use of converters, multiple
sockets or extension cords is
strongly advised against
!Before cleaning or maintaining
the washing machine, unplug
the appliance and turn off the
water tap.
!Do not pull on the power cord
or appliance to unplug the
machine.
!Make sure there is no water in
the drum before opening the
door.
!Do not expose the washing
machine to rain, direct sunlight
or other weather elements.
Protect from possible freezing.
!When moving, do not lift the
washing machine by the knobs
or detergent drawer; during
transport, never rest the door on
the trolley. We recommend two
people lift the washing machine.
!In the event of fault and/or
malfunction, turn off the
washing machine, close the
water tap and do not tamper
with the appliance.
Immediately contact the
Customer Service Centre and
only use original spare parts.
Failure to observe these
instruction may jeopardise
appliance safety.
Electrical connections and
safety instructions
WARNING:
the appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on
and off by a utility.
WARNING:
water may reach very high
temperatures during the
wash cycle.

!
6
2. INSTALLATION
!Remove the 2or 4transportation
screws (A) on the back and
remove the 2or 4flat washers,
rubber bungs and plastic spacer
tubes (B) as illustrated in figure 1.
!If the washing machine is built-in,
unscrew the 3or 4transportation
screws (A) and remove the 3or 4
flat washers, rubber bungs and
plastic spacer tubes (B).
! During the removal of the screws
occasionally spacer tubes fall
inside the product, these can be
remove by tilting the product forward
and recovering them from the floor or
inside the base of the machine.
!Cover the open transportation screw
holes with the 2or 4plastic caps
included in the instruction bag.
!Place the corrugated plastic sheet,
found on top of the appliance during
the unpacking process, into the base
of the appliance as shown in figure 2
(according to the model, consider
version A, Bor C).
A
A
A
A
B
B
B
B
1
3
2
1
3
1
2
A
C
B
2
WARNING:
keep packaging materials
away from children.
In some models this operation
will not be necessary, because
the corrugated plastic sheet
will be already placed on the
bottom of the appliance.

!
EN
7
!Connect the water hose to the water
supply tap (fig. 3) only using the hose
supplied with the appliance (do not
reuse old hose-sets).
!SOME MODELS may include one or
more of the following features:
!HOT&COLD (fig. 4):
water mains connection settings with hot
and cold water for higher energy savings.
Connect the grey tube to the cold water
tap and the red one to the hot water
tap. The machine can be connected to
the cold water tap only: in this case, some
programs may start a few minutes later.
!AQUASTOP (fig. 5):
a device located on the supply tube that
stops water flow if the tube deteriorates;
in this case, a red mark will appear in the
window “A” and the tube must be
replaced. To unscrew the nut, press the
one-way lock device "B".
!AQUAPROTECT – SUPPLY TUBE WITH
GUARD (fig. 6):
Should water leak from the primary
internal tube "A", the transparent
containment sheath "B" will contain water
to permit the washing cycle to complete.
At the end of the cycle, contact the
Customer Service Centre to replace the
supply tube.
3
1
4
B
A
5
B
A
6
Hydraulic connections

!
8
!The washing machine should be installed in
its final position such that the water fill hose
is not kinked or trapped. The corrugated
drain hose should be inserted into suitable
drain pipe of between 50 cm and 85 cm
height above the floor using the curved drain
hose support. If an under sink connection is
used the drain hose must be routed above
the sink overfill opening to prevent back
siphoning. Care must be taken to avoid
kinking or trapping the drain hose (fig. 7).
!Level the appliance using the feet as
illustrated in figure 8:
a. turn the nut clockwise to release the
screw;
b. rotate the foot to raise or lower it until it
touches to the floor;
c. lock the foot, screwing in the nut, until it
tightens against to the bottom of the
washing machine.
!Plug in the appliance.
min 50 cm
max 85 cm
+2,6 mt
max
max 100 cm
min 4 cm
7
A
B
C
8
Setting
WARNING:
contact the Customer Service Centre
should the power cord need
replacement.
Installation faults are not covered by
the manufacturers warranty.

!
EN
9
3. PRACTICAL HINTS
When sorting laundry, make sure:
- have eliminated metallic objects such as
hair clips, pins, coins, from laundry;
- to have buttoned pillow cases, closed
zips, tied loose belts and long robe
ribbons;
- to have removed rollers, hooks or clips
from curtains;
- to have carefully read clothing washing
labels;
- to have removed any persistent stains
using specific detergents.
!When washing rugs, bedcovers or other
heavy clothing, we recommend you avoid
the spinning cycle.
!To wash wool, make sure the item can be
machine washed. Check the fabric label.
!Leave the appliance’s door slightly open
between washes, to prevent possible bad
smells developing inside the machine.
Tips on how to save money and not
damage the environment when using your
appliance.
!Load the machine to the highest capacity
shown in the programme table for each
programme - this will allow you to SAVE
energy and water.
!Noise and residual laundry moisture are
affected by spin speed: a faster spin is
associated with greater noise and lower
residual moisture in the laundry.
!The most efficient programmes in terms
of combined use of water and energy are
usually the longer-lasting ones with lower
temperature.
Maximise the load size
!Achieve the best use of energy, water,
detergent and time by using the
recommended maximum load size.
Save up to 50% energy by washing a full
load instead of 2 half loads.
Do you need to pre-wash?
!For heavily soiled laundry only!
SAVE detergent, time, water and
between 5 to 15% energy consumption
by NOT selecting Prewash for slight to
normally soiled laundry.
Is a hot wash required?
!Pretreat stains with stain remover or soak
dried in stains in water before washing to
reduce the necessity of a hot wash
programme. Save energy by using a low
temperature wash programme.
Before using a drying programme
(WASHER-DRYERS)
!SAVE energy and time by selecting a
high spin speed to reduce the water
content in laundry before using a drying
programme.
Below is a short guide with tips and advice
on the use of detergent.
!Only use detergents suitable for machine
washing.
!Select your detergent according to the
type of fabric (cotton, delicates,
synthetics, wool, silk, etc.), the colour, the
type and level of soiling and the
programmed washing temperature.
!To use the right amount of detergent,
softener or any other additives, carefully
follow the manufacturer’s instructions
every time: correctly using the
appliance with the right dose allows
you to avoid waste and to reduce the
environmental impact.
Load tips
Useful advice for saving
Dosing the detergent

!
10
!Too much detergent leads to excessive
foam, which prevents the cycle being
carried out correctly. It could also affect
the quality of the washing and rinsing.
The use of ecological detergents without
phosphates may cause the following
effects:
- cloudier rinse drain water: This effect is
tied to the suspended zeolites which do
not have negative effects on rinse
efficiency.
- white powder (zeolites) on laundry at
the end of the wash: this is normal, the
powder is not absorbed by fabric and does
not change its colour.
To remove the zeolites, select a rinse
programme. In the future consider using
slightly less detergent.
- foam in the water at last rinse: this does
not necessary indicate poor rinsing.
Consider using less detergent in future
washes.
- abundant foam: This is often due to the
anionic surfactants found in the detergents
which are hard to eliminate from laundry.
In this case, do not re-rinse to eliminate
these effects: it will not help at all.
We suggest conducting a maintenance
wash using a proprietary cleaner.
If the problem persists or if you suspect a
malfunction, immediately contact an
Authorised Customer Service Centre.
When washing heavily soiled whites,
we recommend using cotton programs of
60°C or above and a normal washing
powder (heavy duty) that contains
bleaching agents that at medium/high
temperatures provide excellent results.
For washes between 40°C and 60°C
the type of detergent used needs to be
appropriate for the type of fabric and
level of soiling. Normal powders are
suitable for “white” or colour fast fabrics
with high soiling, while liquid detergents
or “colour protecting” powders are
suitable for coloured fabrics with light
levels of soiling.
For washing at temperatures below
40°C we recommend the use of liquid
detergents or detergents specifically
labeled as suitable for low temperature
washing.
For washing wool or silk, only use
detergents specifically formulated for
these fabrics.

!
EN
11
4. CLEANING AND
MAINTENANCE
Looking after your appliance correctly can
extend its lifespan.
!Disconnect the machine from the power
supply.
!Clean the appliance’s external cabinet,
using a damp cloth and AVOIDING
ABRASIVES, ALCOHOL AND/OR
DILUENTS.
!It is advisable to regularly clean the
detergent drawer to avoid the
accumulation of detergent and additive
residues.
!Remove the drawer gently but firmly.
!Clean the drawer under running water
and put it back into its compartment.
FOR MODELS WITH AUTOMATIC LIQUID
DETERGENT AND SOFTENER DOSING
SYSTEM:
!Pull out the drawer completely by
pressing the release button, paying
attention to the leakage of detergent
residues.
1
2
!Fill the drawer with hot water.
!Shake the drawer in order to let the water
flow in all the compartments.
!Empty the drawer from excess water and
reinsert it completely.
Cleaning the appliance’s exterior
Drawer cleaning
Before proceeding with cleaning, all
the compartments must be empty.
WARNING:
DO NOT use acid products (for example
vinegar) or aggressive detergents to
clean the drawer, in order to avoid
damaging the seals and/or internal
parts of the appliance.

!
12
!The appliance has a special filter that
traps larger residues that could block the
draining system, such as buttons or coins
(depending on the model, consider
version Aor B).
We recommend checking and cleaning
the filter 5 or 6 times a year.
!Disconnect the machine from the power
supply.
!Ensure all the water has been emptied
from the drum.
!Before unscrewing the filter, we
recommend you place an absorbent cloth
under it to keep the floor dry. A small
amount of water will come out of the filter
as you remove it - this is normal.
!Turn the filter counter-clockwise to the
limit stop.
!Remove and clean the filter; when
finished, replace it turning it clockwise.
The filter handle will be locked when it is
not possible to turn any further and the
handle is horizontal. Smearing a small
amount of liquid soap on the filter seal will
help refitting.
!Repeat the previous steps in reverse
order to reassemble all parts.
B
A
!If the appliance is kept in a non-heated
room for long periods of time, all water
residues must be completely removed
from the pipes.
!Disconnect the machine from the power
supply socket.
!Detach the tube from the drainage system
and clip on the rear of the machine and
lower it, fully draining water into a bowl.
!Secure the drain tube with the drainage
system and clip on the rear of the
machine when finished.
!Keep the door glass and gasket clean.
Cleaning the pump filter
Suggestions for moves or
prolonged disuse
FOR MODELS WITH AUTOMATIC
LIQUID DETERGENT AND SOFTENER
DOSING SYSTEM:
should you need to tilt or move the
machine, remove the detergent drawer
before proceeding, keeping it
horizontal so as to avoid any leakage.

!
EN
13
5. PORTHOLE EMERGENCY OPENING
Should the porthole be locked due to power
Shortage (if the plug is removed before the
end of the cycle, re-plug it and turn off the
machine by pressing ON/OFF button to
open the door) or as a result of a fault, it
can be opened according to the following
emergency unlocking procedure:
1. Disconnect the machine from the power
socket.
2. Ensure that the water level is below the
porthole before opening it, to prevent any
flooding. Otherwise, drain excess water
through the drain tube and collect it in a
bucket.
3. Take out the detergent compartment
(fig. 1).
4. Insert a screw driver or a similar tool for
about two centimeters of depth ( in order
to fit it into the inner hook, but not fully
down). Lever up and simultaneously
open the porthole as shown in figure 2.

!
14
6. COMMAND PANEL
1
1. ON/OFF
HOME SCREEN
17
2
53
6
45
1. SETTINGS Menu
2. List of favourite programmes
3. Main programme area
4. Other programmes/last programme
area
5. Arrow for moving screen
6. Status bar
7. Activation/deactivation of REMOTE
CONTROL (Wi-Fi)
SETTINGS SCREENS
14 538
627
1. Choose language
2. Set water hardness
3. Wi-Fi settings
4. Direct Voice/Microphone
activation/deactivation
5. Volume adjustment
6. Screen brightness adjustment
7. CHILD LOCK (command lock)
8. CARE DOSE setting
SCREENS WITH SETTINGS, PROGRAMMES
AND OPTIONS
TOTAL CARE
START
40° 1:49’
1400
1:
4
9’
OPTIONS 72
45 6
3
1
8
11
10
98
1. HOME (back to home screen)
2. BACK (back to previous screen)
3. Saving/showing favourite programme
4. Setting the temperature
5. Setting the spin speed
6. Setting the delay start
7. Options menu
8. Available options
9. Option information
10. Start programme
11. Selected programme*
* Keep it pressed to view information
on the programme.
OK
TEMPERATURE
4O°
4O°
2
1
1. Movable ring dial for option
adjustment
2. Confirm setting

!
EN
15
STATUS BAR
SETTINGS Menu
HOME
REMOTE CONTROL active
REMOTE CONTROL inactive
DOOR LOCK indication
Microphone off (grey icon)
Direct Voice not active
Microphone enabled
Microphone disabled
CARE DOSE
(softener and detergent)
CARE DOSE
(softener only)
CARE DOSE
(detergent only)
ECO INDEX
(cycle consumption indication)
Icon off: appliance has not
been registered with the App
yet *
Icon on, steady: the
appliance is connected to
your home’s Wi-Fi network*
The number of full bars
shows the intensity of the
signal.
Barred icon: the appliance is
not connected to your
home’s Wi-Fi network*
Flashing icon: the Wi-Fi
network has reset (during
registration with the App) *
Icon with exclamation mark:
the appliance is connected
to your home’s Wi-Fi
network but there is no
Internet access*
*If selected, the icon opens a screen with
information on the connection status.

!
16
7. FIRST MACHINE START-UP
!After connecting the appliance to the
network and turning it on by pressing
ON/OFF, select the desired language by
scrolling through the available ones.
!Confirm using the icon.
You can change the language at any time
by selecting the icon in the SETTINGS
menu in the home screen.
This appliance, through the CARE DOSE
system, can automatically adjust the
detergent dose according to the selected
cycle (cottons, delicates, etc.), to the weight
of the laundry and to water hardness.
Water hardness
= SOFT (0-12 °fH o 0-7 °dH)
= MEDIUM (13-30 °fH o 8-17 °dH)
= HIGH (≥30 °fH o ≥17 °dH)
!If you want to change the standard water
hardness setting (and consequently the
amount of detergent dispensed), swipe
the ring dial to select the level you want.
The higher the water hardness, the
more detergent will be dispensed.
!Confirm using the icon.
Set language
Changing language
Setting the level of WATER
HARDNESS
The water hardness factory setting is
MEDIUM LEVEL because this satisfies
the requirements of the majority of
users.
Check the LEVEL of water hardness of
the place you live in through your
water provider before using the CARE
DOSE function.

!
EN
17
8. VARIOUS SETTINGS
A number of settings can be entered
through this menu on the home screen.
This appliance is equipped with Wi-Fi
technology, so it can to be controlled
remotely via an App.
- Pairing the machine with the App
!Download the Hoover Wizard App onto
your device.
!Open the App, create a user profile (or
login if you already have one) and pair
the appliance by either following the
instructions that appear on the device’s
display screen or using the procedure
described in the "Quick Guide" that
comes with the appliance.
- Enabling REMOTE CONTROL
!Make sure that the router is on and
connected to the Internet.
!Load the laundry, close the door, add
the detergent if necessary.
!Switch the device on by pressing
ON/OFF.
!Enable the REMOTE CONTROL function
by tapping on its switch icon:
= Remote control disabled.
= Remote control enabled.
!A message warning that the door is
locked will appear on the display screen.
!Confirm using the icon.
!Open the Hoover Wizard App and start
the cycle.
!At the end of the cycle, switch off the
machine by pressing ON/OFF (or
disabling REMOTE CONTROL) to
unlock the door.
- Disabling REMOTE CONTROL
!To exit the REMOTE CONTROL mode
during a cycle, tap on the switch icon on
the display screen.
!With the door closed, by tapping on the
REMOTE CONTROL switch icon, you
can go back to controlling the appliance
through the app as well.
SETTINGS Menu
REMOTE CONTROL (Wi-Fi)
The Hoover Wizard App is available
both for Android and for iOS tablets
and smartphones.
To discover all the details of the Wi-Fi
features, explore the App menus by
switching on the DEMO mode.
The frequency of your home Wi-Fi
network must be in the 2.4 GHz band.
The machine cannot be configured if
the home network is set on the 5 GHz
band.
The REMOTE CONTROL function can
be activated only if the door is closed.
Even if REMOTE CONTROL is active,
you can still use the device through
the display.
For safety reasons, in some phases
of the wash cycle, the door can only
be opened if the level of the water is
below the door’s lower rim and the
temperature is below 45°C. If these
conditions are met, wait for the DOOR
LOCK icon to switch off before
opening the door.

!
18
This new function allows you to interact with
the appliance via voice interaction.
PRELIMINARY SETTINGS
!Before using this function, you must enter
the language and water hardness in the
display screen and register the appliance
with the Hoover Wizard App.
!For Direct Voice to work in optimal
conditions, always remember to speak
towards the microphone, at a distance
no greater than 2 metres. The room
must be as quiet as possible.
DAILY USE
!To interact with the appliance, start the
conversation with "HEY WASH", wait for
the machine to beep and for the image of
the microphone to appear on the display
screen, then proceed with the request.
E.g.: "HEY WASH. START COTTON
CYCLE"
WHAT YOU CAN ASK
1) Start and manage programmes
2) Learn about the best cycle to use
3) Receive updates on the cycle status
4) Ask for advice and suggestions
5) Receive assistance
6) Ask for advice on maintenance
7) Adjust the volume
8) Set the CARE DOSEfunction
9) Activate the CHILD LOCK
!To interrupt or reset the conversation, say
"HEY WASH, THANKS!" at any time or
select on the display.
!For more information and explanations,
please check the quick guide at:
go.candy-group.com/hm-700.
MICROPHONE
ACTIVATION/DEACTIVATION
To activate or deactivate the microphone,
access the settings menu and tap on the
specific icon.
Microphone enabled
Microphone disabled
Direct Voice (voice control)
This function is available in the
following languages: Italian, English,
French, Spanish, German and
Russian.
To use Direct Voice, the appliance
MUST be always connected to your
Wi-Fi network.
Listed below are the minimum
requirements for the Direct Voice
system to work correctly:
Bandwidth
• Upload: Min 512 kbps
• Download: Min 512 kbps
Band frequency
• 2.4 GHz IEEE 802.11 g/n
To start or stop a cycle using Direct
Voice, you must enable the
appliance’s REMOTE CONTROL
function.

!
EN
19
!You can adjust the volume using voice
interaction or through the settings menu
in the display screen, by tapping on the
specific icon.
Maximum volume
Medium volume
Minimum volume
Mute
Automatic volume
!Below are the specific voice commands
to adjust the volume:
- "HEY WASH. TURN UP/TURN DOWN
VOLUME"
- "HEY WASH. SET THE VOLUME TO
MAXIMUM/MINIMUM"
- "HEY WASH. MUTE VOLUME"
!If the volume is set automatically, the
system will manage intensity so it is best
suited for the appliance’s activity.
!To adjust the display screen’s brightness,
select the specific icon and tap on the
displayed bar.
!Confirm using the icon.
!To avoid undesired or accidental changes
(e.g. caused by children playing), you can
lock all the elements on the display
screen, with the exception of the
SETTINGS menu and the ON/OFF
button. The microphone will also be
disabled, to avoid possible undesired
voice interactions.
!To activate or deactivate the lock, select
the specific icon.
Volume adjustment
Screen brightness adjustment
CHILD LOCK

!
20
SOME MODELS have an automatic dosing
system, which dispenses a precise dose of
detergent and softener for up to 20
washes*, ensuring your laundry is perfectly
cleaned. In this way, water and energy
waste is reduced by accurately using the
amount of detergent and softener that is
right for the kind of fabric, the weight of the
laundry and the water hardness.
*Estimate based on a medium laundry load and low
hardness water.
- CARE DOSE setting
To activate/deactivate the automatic
dispensing of detergent and/or softener, tap
on the specific switches:
= automatic dosing inactive
= automatic detergent dosing active
= automatic softener dosing active
= automatic detergent and softener
dosing active
- Detergent/softener drawer
The drawer is divided into 3 compartments,
as shown in the figure:
AB
C
A= for LIQUID laundry detergent
B= for softener
C =NO AUTOMATIC DOSING: for powder
detergent or liquid detergent with the
specific tray provided.
CARE DOSE
(automatic dose dispensing)
WARNING:
the automatic dosing system can only
be used with LIQUID softeners and
detergents.
IT IS FORBIDDEN to use powder
detergents or other additives.
Before using concentrated softeners,
dilute them according to the
manufacturer's instructions on the
package.
WARNING:
it is necessary to clean the drawer
every time it is filled or the type of
detergent and softener is changed.
The drawer MUST REMAIN CLOSED
during the entire wash cycle,
otherwise the dosing may not work
properly or water may leak.
If the detergent and/or softener have
reached the minimum level in the
tank, the corresponding icons will
flash. It will however still be possible
to complete a number of washing
cycles.