Hopkins vueSMART 50050 User manual

1
1
50050
Trailer Camera
vueSMART™
Instruction Manual

2
Thank you for purchasing the vueSMART™ Trailer Camera
Before operating your new product, please read these instructions carefully.
This instruction manual contains information for safe use, installation and
maintenance of the product
Please keep this instruction manual in a safe place for future reference. This
will ensure safe use and reduce the risk of injury. Be sure to pass on this
manual to new owners of this product
The manufacturer does not accept responsibility for any damages due to not
observing these instructions
If you have any further questions regarding our products,
please contact us at [e-mail] or [phone]

3
3 - What’s Included
4 - Physical Installation
7 - App Setup
WHAT’S INCLUDED
TABLE OF CONTENTS
Trailer Camera Trailer Bracket
2 - Stainless Steel Screws 2 - Heat Shrink Connectors
11 - Features
12 - Troubleshooting
Antenna BracketAntenna

4
Prior to the installation, determine if you want
to mount the camera behind an existing trailer
light or hard mount to your trailer
The universal mounting bracket is designed
for both styles of installation. If you have a
clearance/marker light on the back of the
trailer already, we recommend putting the
bracket behind the light
With any other style of light, we recommend
hard mounting the trailer camera to the trailer.
To do this, cut the top part of the universal
mounting bracket off as shown
If hard mounting, nd closest power
connection on trailer and connect for power.
Use provided screws to attach bracket to trailer
PHYSICAL INSTALLATION
Mounting Bracket should look
like this after cutting

5
1. Remove trailer light from back of trailer
2. Using one of the Heat Shrink Connectors,
connect the RED wire from Trailer Camera to
the POWER wire coming from the trailer/light
3.Using the second Heat Shrink Connector,
connect the BLACK wire from the Trailer
Camera to the GROUND wire coming from
the trailer/light
4.Once wiring is complete, slide the clearance/
marker light through the universal mounting
bracket and line up with the screw holes.
Once lined up, insert screws to secure to
trailer
5.Attach the provided antenna to the
side of the camera
PHYSICAL INSTALLATION CONT’D

6
6.Place the camera in the bracket
7.Leave a “loop” or slack in the installation cable
to help prevent water from getting into the trailer
8.After installation is complete, adjust the camera
to proper viewing angle by rotating the camera
up or down by hand
9. Optional antenna bracket included. Install on
trailer as shown to hold antenna in position
* We recommend applying silicone around the outside of
the mounting bracket and trailer housing to prevent water
from getting into the trailer
* Logo on camera should be facing upwards, with antenna
connection on the right side
PHYSICAL INSTALLATION CONT’D

7
Set up your vueSMART™ Camera in the Hopkins Towing Solution® App
APP SET-UP
for IOS for Android
The Hopkins Towing Solution®app will walk you through
set-up and managing your vueSMART™Trailer Camera
Search for “Hopkins Towing Solutions”
in the app store or download by
scanning one of the QR codes
*must have IOS V8 or Android V6 or later

8
NAME
first
last
PHONE NUMBER
phone number
PRODUCT SERIAL NUMBER
number
EMAIL
email
Enter set-up information for your vueSMART™ Trailer Camera
Once the app is fully downloaded, press the app
icon on your smart device to open the app
Press “ENTER” and enter your name, email, phone
number and product serial number (located on
back page of instructions). This will register your
1 Year Warranty and allow you to connect your
camera to the WiFi
If you have any further questions regarding our products,
please contact us at [e-mail] or [phone]
APP SET-UP CON’T

9
CHOOSE A NETWORK
WiFi One
WiFi Two
WiFi Three
WI-FI
WI-FI
i
Hopkins Towing Solutions i
i
i
Connect your vueSMART™ to WiFi
Ensure that your vueSMART™Trailer Camera is on.
Go to your smart device settings and select WiFi
Turn “ON” WiFi on your smart device and select the
“Hopkins Towing Solutions” WiFi signal
Enter password for WiFi ”HOPKINSMFG”
and you’re good to go. Note: case sensitive
Remember, the WiFi signal is dedicated to your
vueSMART™Trailer Camera. Any other WiFi signal
will NOT work with this product
You are now ready to connect to vueSMART™
APP SET-UP CON’T

10
Try it out!
After setup, go to the Hopkins Towing Solutions®app to see what’s
behind your trailer! Smile, you may be on camera
Next, make sure the camera is adjusted for optimal viewing
Everything look good?
Continue to the next section
Something not right?
Jump ahead to the troubleshooting section
*We recommend using a phone holder while operating the app
APP SET-UP CON’T

11
Check out all of the exciting features!
Here are some of the features of the vueSMART™Camera
Take a picture allows you to take a picture at any moment
while using this product. All pictures save to your phone
automatically
Record a video allows you to take a video at any moment while
using this product. All videos save to your phone automatically
Led brightness 3 brightness settings (off, 50%, 100%).
Simply press the icon until you find your desired setting. We
recommend that you turn off the led lights while driving down
the road to ensure you do not distract other drivers
SmartZone™ back-up assist green, yellow, red detection zones
show how close an object is behind your trailer
FEATURES

12
1. Why can’t I connect or see the camera when I search on Bluetooth? The trailer camera has a built in WiFi hotspot.
No other network is needed and the camera does not connect via Bluetooth
2. The camera does not turn on immediately. Is it ok? The camera takes about 2 seconds to boot and power on. The
LEDs will be illuminated by default each time the camera is powered on
3. Does the camera work at night? Yes, 6 bright LEDs around the camera support the camera to work in low
illumination
4. Is the camera rainproof? Yes, the trailer camera is water/rain proof. We also recommend putting silicone around
the install area for added protection
5. Do you need to input the password each time the camera is powered on? No, the password will be saved after the
first successful connection to your phone
6. Something has gone wrong - where can I get support? For support with your trailer camera, send an email to the
Hopkins Manufacturing Corporation support team at [e-mail] or call [phone]
FAQs - Android
1. I can’t connect to WiFi or the WiFi won’t stay connected on my Android. Some Androids don’t understand why you
want to connect to a WiFi network without Internet. If a warning alert is displayed, check the box to not ask/show
again and click OK/Yes
2. I can connect to the WiFi but it won’t show an image in the App. Go to Settings -> Data usage -> Cellular data
usage and scroll down to find and select the Trailer Camera App. Turn off background data to prevent the app trying
to use cellular data
3. How can photos and videos save to phone? Go to Settings -> apps and notifications -> select camera app ->
permissions -> switch to “ON”
*For the most up to date list of FAQ’s please refer to the HELP section in the app
TROUBLESHOOTING

13
The equipment complies with RF exposure limits. This module is limited to installation in mobile or fixed applications. The antenna used for
this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such
modifications could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure: The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure
guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS 102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator and your body.
FCC STATEMENT
IC STATEMENT

14
Congratulations on purchasing your new Hopkins Towing Solutions product. All Hopkins Towing Solutions products are made to strict
quality standards. If used properly for its intended purpose, your product should provide many years of use.
We are pleased to provide you with a 1 year warranty on your Hopkins Towing Solutions product. The details of this warranty are set out in
the terms and conditions which supplement the authorized dealer’s terms and conditions of sale.
This warranty is given in addition to your other rights under the laws of the country where you purchased this product.
LIMITED WARRANTY TERMS AND CONDITIONS
1. Hopkins warrants that this product will be free from defects in workmanship and materials for a period of 1 year from date of retail
purchase, in original packaging, from a Hopkins authorized reseller and used in normal conditions. If a valid claim is made under
warranty then you will only be entitled to claim in accordance with paragraph 6 below.
2. The warranty only applies to Hopkins products: with a valid serial number; used for consumer, private use and not for commercial or
industrial use; and where you have validated the warranty in accordance with paragraph 4 below.
3. The warranty does not cover damage or loss: caused by poor, faulty or incorrect use, installation or maintenance; caused by accident
(including force majeure or natural forces), misuse, negligence, abrasion, improper storage following delivery, rot and/or infestation
following delivery, leaks (or similar incidents); occurring during shipment (even when Hopkins arranged or paid for shipping); caused
by failure to follow instructions in the owners guide, damaged, caused by normal wear and tear; caused by maintenance, repairs or
modifications other than those carried out by an authorized dealer; caused to the decorative surface of the product; caused to any
data, software or information. This warranty also excludes claims based on any misrepresentations by the seller; or if this product’s
serial number has been altered, defaced, removed or rendered unidentifiable
4. To validate the warranty you must: (a) fill in the registration card provided with this product; and (b) register the warranty covering
this product within 6 months of the date of the bill of sale by following the instructions on the registration card; and (c) have the
original bill of sale to validate warranty of this product.
5. If you require warranty service on this product, please cease using the product when a fault arises and contact us directly. You will
have to present your original bill of sale to establish warranty coverage. Hopkins customer service can be reached at: Toll-Free (800)
835-0129 or [phone]. Email: [email protected] Address: Hopkins Manufacturing Corporation, 428 Peyton St. Emporia,
KS 66801.
6. Following the filing of a claim, Hopkins will investigate the claim. If we believe there is a defect covered by the warranty, we will at our
option either repair or replace the defective product (or part).
7. Please note in the event that no defect can be found, it is your responsibility to pay for the re-delivery of the replacement items. If a
defect is found, Hopkins will pay for the re-delivery of the replacement items.
WARRANTY INFORMATION

15
8. Installation of any repaired or replaced product will not be Hopkins responsibility
If you do not allow the authorized dealer to inspect the product which is the subject of the warranty claim, you will invalidate the
warranty in respect of that claim.
9. Any repaired or replaced Hopkins product parts shall be shall be guaranteed on the terms of this warranty for the unexpired portion
of the warranty period only.
10. This warranty is non-transferrable and is personal to the original end-use purchaser as shown on the original dated bill of sale. Any
attempt to transfer this warranty shall immediately render it void.
11. This warranty is subject to the jurisdiction of the courts of the State where you purchased this product, and any dispute or claim
arising out of, or in connection with it or its subject matter, shall be governed by, and construed in accordance with the laws of that
State.
12. In the event of any difference between this warranty and the provisions in any owners manuals, warranty leaflets, or packaging
cartons, the terms of this warranty shall prevail to the fullest extent allowed by law.
THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND
CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, HOPKINS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IF HOPKINS CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE
DURATION OF THIS WARRANTY.
NO HOPKINS RESELLER, AGENT, OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION, OR ADDITION TO
THIS WARRANTY. HOPKINS IS NOT RESPONSIBLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT
LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF ANY EQUIPMENT OR PROPERTY, ANY COSTS
OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH HOPKINS PRODUCTS,
HOPKINS TOTAL LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THIS PRODUCT PURSUANT TO THE TERMS OF THE
WARRANTY.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR EXCLUSIONS
OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OR CONDITIONS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY
STATE OR (WHERE APPLICABLE IN THE COUNTRIES WHERE HOPKINS HAS NON-US/CANADA AUTHORIZED DEALERS) COUNTRY. NO
ACTION OR CLAIM TO ENFORCE THIS WARRANTY SHALL BE COMMENCED AFTER THE EXPIRATION OF THE WARRANTY PERIOD.
WARRANTY INFORMATION CON’T

16
16
16
CAMÉRA DE REMORQUE
vueSMARTMC
Manuel d’instructions

17
Merci d’avoir acheté une caméra de remorque vueSMARTMC
Veuillez lire ces instructions attentivement avant d’utiliser votre nouveau
produit. Le présent manuel d’instructions contient des renseignements sur
l’utilisation, l’installation et l’entretien sécuritaires du produit
Veuillez conserver ce mode d’emploi en lieu sûr pour référence ultérieure.
Sa consultation vous permettra d’utiliser le produit en toute sécurité et de
réduire les risques de blessures. Assurez-vous de transmettre ce manuel aux
nouveaux propriétaires du produit
Le fabricant n’accepte aucune responsabilité pour tout dommage attribuable
au non-respect de ces instructions
Si vous avez des questions au sujet de nos produits,
veuillez communiquer avec nous à [e-mail] ou au 800835-0129

18
18 – Contenu
19 – Installation
22 – Con guration de l’application
CONTENU
TABLE DES MATIÈRES
Caméra de remorque Support pour remorque
2 – Vis en acier inoxydable 2 – Connecteurs thermorétractables
26 – Caractéristiques
27 – Dépannage
Antenne Support pour antenne

19
Avant l’installation, déterminer si la caméra sera
installée derrière un feu de remorque existant ou
directement sur la remorque
Le support de montage universel est conçu pour
les deux types d’installation. S’il y a déjà un feu de
gabarit/de position à l’arrière de la remorque, nous
recommandons de placer le support derrière le feu
Avec tout autre type de feu, nous recommandons de
xer la caméra directement à la remorque. Pour ce
faire, découper la partie supérieure du support de
montage universel comme montré
Pour l’installation directement sur la remorque,
trouver la connexion d’alimentation la plus proche
sur la remorque et brancher la connexion an
d’obtenir l’alimentation. Utiliser les vis fournies pour
xer le support à la remorque
INSTALLATION
Le support de montage devrait
ressembler à celui montré
après la coupe
Support pour antenne

20
1. Retirer le feu de remorque à l’arrière
de la remorque
2. En utilisant l’un des connecteurs
thermorétractables, connecter le l ROUGE de la
caméra de la remorque au l d’ALIMENTATION
provenant de la remorque/du feu
3. En utilisant le deuxième connecteur
thermorétractable, raccorder le l NOIR de la
caméra de remorque au l DE TERRE provenant de
la remorque/du feu
4.Une fois le câblage terminé, glisser le feu de gabarit/
de position dans le support de montage universel et
l’aligner avec les trous de vis. Insérer ensuite les vis
pour bien xer le support à la remorque
5.Fixer l’antenne fournie sur le côté de la caméra
INSTALLATION (SUITE)