HORI 1500#00-A Series User manual

1/12
User
UserUser
User's
's's
's
Manual
ManualManual
Manual
P
PP
Preparation day
reparation dayreparation day
reparation day :
::
:
30/June/2009
30/June/200930/June/2009
30/June/2009
ProductName
ProductNameProductName
ProductName
:
::
:WIRELESS
WIRELESSWIRELESS
WIRELESS
MODULE
MODULEMODULE
MODULE
ModelName
ModelNameModelName
ModelName
:
::
:1500
15001500
1500#
##
#00
0000
00‑
‑‑
‑A
AA
A
(
((
(ModelNumber
ModelNumberModelNumber
ModelNumber)
))
)

2/14
Revision hysteresis.
Date Edition number Revision content Writer
30/July/2009 First version First version publication T.Ogawa

3/14
■Onsafetydesign
Thoughourcompanyhaspaidcloseattentiontoquality,semi‑conductiveproducts
canmalfunctionandfail.
Ourcompanyhasgonetogreatlengthstocreateasafeproductwhichdoesnotcause
anyinjuryaccidents,fireaccidents,publicharm,etc.,andincorporatedsafety
featuressuchasfirepreventionandmalfunctionpreventionintoourdesign.
■Onexemptionfromobligatorymatter
Thecompanyisnotresponsiblefordamagesresultingfromnaturaldisaster,
actionsbyathirdpersonandotheraccidents,deliberatemisuseornegligence
bythecustomer,anddamagesduetoabnormaluse.
Thecompanyisnotresponsibleforanyincidentaldamagecausedbyourproduct
(lossofbusiness,lossofthebusinessprofit,lossand/orchangesinmemory
content,etc.).
Thecompanyisnotresponsibleforallotherdamagescausedthroughfailureto
abidebythedescriptionofthismaterial.
The company is not responsible for damages resulting from connection with
equipmentorcombinationwiththesoftwareforwhichwearenotconcernedwith.
Finally,ourcompanyisnotresponsiblefordamagesresultingfromerrorfromthis
material.
■Onequipmentcertification
Followingmattersmaybepunishablebylaw:
・Ifanymodificationismadetothisproduct.
・Ifthesilkprintingontheproductisremoved.

4/14
Contents
1.Applicationrange5
2.Generalspecification6
3.Usage 8
4.Radiospecification 10
5.Precautionsforeachstandard 11
6.Requirementstoendproduct13

5/14
1.Applicationrange
1‑1 Application
Thisspecificationisappliedtothefollowing.
ProductName: WIRELESSMODULE
ModelName : 1500#00‑A
(ModelNumber)
1‑2Applicablewith
SonyComputerEntertainment『Playstation3』
※1500#00‑Aisaradiomodule.
Thisisatransceivermoduleandrequiresittobeplacedwithinan
externalinputdevicetooperate.
Itmustbeusedwithmodelnumber1500#00‑Basaset.
1‑3Applicationstandard
・WirelessTelegraphyActArticle38Section2‑1‑19
・FCC Part15SubpartC
・EN300328
※ThismodulemeetstheCEmarkrequirements.
However,itisadvisedthattheexternalinputdevicebere‑examinedfor
compatibilityafterthemoduleismounted.

6/14
2.Generalspecification
2‑1Shapeanddimension
Dimension : Approximately30mm×39mm×12mm
Mass :About8g
2‑2Operationaltemperatureandhumidityrange(Inoperation)
Temperature :0℃〜+40℃
Humidity :20〜25%RH
(Assumingthereisnodewcondensation.)
2‑3Storagetemperatureandhumidityrange(Instorage)
Temperature :‑25℃〜+60℃
Humidity :20〜85%RH
(Assumingthereisnodewcondensation.)
2‑4Function
Thisproductisaradiomodule.
Itisnecessarytosetanexternalcontrollerandusewith1500#00‑B
asaset.
Bysettingtheunit,thecontrollerbecomesoperationalwiththeSony
ComputerEntertainment『Playstation3』.
2‑5Systemconstitution
Settoanexternalcontroller.
MainPCB
Controller
Playstation3
1500#00‑B 1500#00‑A

7/14
2-6 Connection unit number
1500#00‑Bcommunicatesone‑to‑onewith1500#00‑A.
Amaximum7setsof1500#00‑Aand1500#00‑B,canbeconnectedtoone
『Playstation3』.
Also,inthepresenceofmultiple『Playstation3』,amaximum25setsof
1500#00‑Aand1500#00‑Bcanbeconnectedsimultaneously.
2‑7Power
Inputvoltage:DC+1.8〜3.3V(Suppliedfrom2batteries)
Consumptioncurrent:5mA(Innormaloperation)
2‑8Communicationrange
Thecommunicationrangeoftheradiocommunicationiswithin10m.
2‑9Appearanceandnameofeachpart
Antenna
Shieldcase

8/14
3.Usage
3‑1 Connectionmethod
①TheHP3‑1500Aismountedonanexternaldeviceaspartofthecontroller.
※Fromthispointforward,thedevicewillbereferredtoascontroller
with1500#00‑Amounted.
②1500#00‑BisconnectedwiththeUSBportofthePlaystation3console.
③1500#00‑BcommunicationindicatorLEDflashesonandoff.
(Lightwillturnonandoffevery250msecintervals.)
④Thecontrollerwith1500#00‑Amountedissuppliedwithpower.
(DC+1.8V〜3.3V)
⑤Whencontrollerwith1500#00‑Amountedestablishescommunicationthe
communication indicator LED on the 1500#00‑B either stays lit or
continuestoflashesonandoff.
(Theflashing,inthiscase,occursatevery100msecintervals.)
3‑2 Pinlayout
PinNo Setting Function
Note
1 Input VSS Power Ground(0V)
2 Input VDD Power Supply(DC+1.8V〜+3.3V)
3 Input R2 Insidepull‑down Normal:Low Active:Hi
4 Input R1 Insidepull‑down Normal:Low Active:Hi
5 Input L2 Insidepull‑down Normal:Low Active:Hi
6 Input L1 Insidepull‑down Normal:Low Active:Hi
7 Input SELECT Insidepull‑down Normal:Low Active:Hi
8 Input START Insidepull‑down Normal:Low Active:Hi
9 Input − Itisnotused.
10 Input − Itisnotused.
11 Output − Itisnotused.
12 Output − Itisnotused.
13 Input − Itisnotused.
14 Input − Itisnotused.
15 Input − Itisnotused.

9/14
16 Input PROG Itisnotused.
17 Input − Itisnotused.
18 Input VSS Power Ground(0V)
19 Input RESET Normal:Hi Active:Low
20 Input ○ Insidepull‑down Normal:Low Active:Hi
21 Input □ Insidepull‑down Normal:Low Active:Hi
22 Input × Insidepull‑down Normal:Low Active:Hi
23 Input RIGHT Insidepull‑down Normal:Low Active:Hi
24 Input UP Insidepull‑down Normal:Low Active:Hi
25 Input LEFT Insidepull‑down Normal:Low Active:Hi
26 Input DOWN Insidepull‑down Normal:Low Active:Hi
27 Output CSN Itisnotused.
28 Input PS Insidepull‑down Normal:Low Active:Hi
29 Output MISO Itisnotused.
30 Input △ Insidepull‑down Normal:Low Active:Hi
31 Output − Itisnotused.
32 Output MOSI Itisnotused.
33 Output SCK Itisnotused.
34 Output − Itisnotused.
35 Input BMO Batterymonitoring
36 Input − Itisnotused.
3‑3 Sleepfunction
Ifbelowpartsarenotactivefor3minutes,theproductwillentersleepmode.
Inthesleepmode,energyconsumptionwillbeminimized.
PinNo Function PinNo Function
3 R2 22 ×
4 R1 23 RIGHT
5 L2 24 UP
6 L1 25 LEFT
7 SELECT 26 DOWN
8 START 28 PS
20 ○ 30 △
21 □
Ifanyoftheaboveportbecomesactive,thecontrollerwillreturnfromsleepmode.

10/14
4.Radiospecification
4‑1 Generalspecification
Parameter Value/Note
Modulationsystem GFSK
Spectrumdiffusionprocess Frequencyhopping
Numberofchannels 25ch
Frequencyrange 2405MHz〜2477MHz
ICtransmissionoutput 0dBm[Max.]
Datarate 1Mbps[Max.]
Rockcrystalvibratorfrequency
16MHz
Operatingvoltage DC+1.8V〜3.3V(Supplyfrom2batteries.)
4‑2 Channelfrequency
Channel Frequency[MHz]
1 2405
2 2408
3 2411
4 2414
・
・
・
・
22 2468
23 2471
24 2474
25 2477
4‑2 Antenna
Parameter Value/Note
Type Monopoleantenna
Composition Patternantenna
Gain ‑0.08dBi[Max.]

11/14
5.Precautionsforeachstandard
5‑1 FCC ClassB
CAUTION:
Anychangesormodificationsnotexpresslyapprovedbythepartyresponsible
forcompliancecouldvoidtheuser'sauthoritytooperatetheequipment.
NOTE:Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfor
aClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimits
aredesignedtoprovidereasonableprotectionagainstharmfulinterference
inaresidentialinstallation.Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordance
withtheinstructions,maycauseharmfulinterferencetoradiocommunications.
However, there is no guarantee that interferencewillnotoccurina
particularinstallation.Ifthisequipmentdoescauseharmfulinterference
toradioortelevisionreception,whichcanbedeterminedbyturningthe
equipmentoffandon,theuserisencouragedtotrytocorrecttheinterference
byoneormoreofthefollowingmeasures:
—Reorientorrelocatethereceivingantenna.
—Increasetheseparationbetweentheequipmentandreceiver.
—Connecttheequipmentintoanoutletonacircuitdifferentfromthatto
whichthereceiverisconnected.
—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
5‑2 FCC(15.19)/IC(RSS‑210LowPowerDevice)
Operationissubjecttothefollowingtwoconditions:(1)thisdevicemay
notcauseinterference,and(2)thisdevicemustacceptanyinterference,
includinginterferencethatmaycauseundesiredoperationofthedevice.

12/14
5‑3 ICandFCC(Radio)
RFexposurecompliance
1)TocomplywithFCC/ICRFexposurecompliancerequirements,aseparation
distanceofatleast20cmmustbemaintainedbetweentheantennaofthis
deviceandallpersons.
2)Thistransmittermustnotbeco‑locatedoroperatinginconjunctionwith
anyotherantennaortransmitter.

13/14
6.Requirementstoendproduct
ThismodulemustbeintegratedonlybyOEMintegratorsunderthefollowing
conditions.
(1)OEMintegratorhastobeawarenottoprovideinformationtotheusers
regardinghowtoinstallorremovethismoduleintheusersmanualoftheend
productwhichintegratethismodule.Installationbyendusersisstrictly
prohibited.
(2)Antenna
OEMintegratorshallusethismodulewithoutanymodificationsincludingantenna.
Ifmoduleintegratorusesauniqueantenna,theFCCcertificationisrequired
fortheendproduct.
OEMintegratormustmakesurethat20cmminimumseparationismaintainedbetween
usersandtheantenna.
(3)Co‑location.
Thismodulemustnotbeco‑locatedoroperatedinconjunctionwithanyother
antennaortransmitter.ThemoduleintegratorshallobtainFCCapprovalforthe
endproduct,ifthemoduleisusedforco‑locationoperation.
(4)Markings
TosatisfyFCC/ICexteriorlabelingrequirements,thefollowingtextmustbe
placedontheexterioroftheendproduct.
ContainsModuleFCCID:RQZHP3‑1500A,IC:8406A‑HP31500A
Anysimilarwordingthatexpressesthesamemeaningmaybeused.
(5)Cautiontouserformodification
Thefollowingcautionisexpressedontheusersinstructionmanual.
Thechangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheusersauthoritytooperatethedevice.

14/14
(6)CompliancestatementtoFCC
NOTE:Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfora
ClassBdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsare
designedtoprovidereasonableprotectionagainstharmfulinterferenceina
residentialinstallation.Thisequipmentgeneratesusesandcanradiateradio
frequency energy and, if not installed and used in accordance with the
instructions,maycauseharmfulinterferencetoradiocommunications.However,
there is no guarantee that interference will not occur in a particular
installation.Ifthisequipmentdoescauseharmfulinterferencetoradioor
televisionreception,whichcanbedeterminedbyturningtheequipmentoffand
on,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreof
thefollowingmeasures:
—Reorientorrelocatethereceivingantenna.
—Increasetheseparationbetweentheequipmentandreceiver.
—Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhich
thereceiverisconnected.
—Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
(7)CompliancestatementtoIC
Thefollowingstatementisexpressedontheusersinstructionmanual.
Operationissubjecttothefollowingconditions:(1)Thisdevicemaynotcause
harmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,
includinginterferencethatmaycauseundesiredoperation.
Table of contents