HORNER HazLoc High Bay Series User manual
LMAN0071-01-EN
Hazardous Location Series
07/29/20 Page 1
ETG-HHB
HazLoc High Bay User Manual
GENERAL SAFETY INFORMATION
electric shock, falling parts, cuts/abrasions and other hazards, please read
• DO NOT INSTALL DAMAGED PRODUCT!
WARNING
RISK OF ELECTRICAL SHOCK
CAUTION
RISK OF INJURY
• Account for small parts and destroy packing material, as these may
CAUTION
RISK OF FIRE
Opera�ng Characteris�c
• Rated Voltage: 100-240/277 Vac or 200-480 Vac, 50/60Hz
• Ambient Temperature Range: -40ºC (-40ºF) ~ +60ºC (140ºF)
LMAN0071-01-EN
Hazardous Location Series
07/29/20 Page 2
GENERAL WIRING DIAGRAM
• CAUTION:
All units must be individually connected
Black = Line
White = Neutral
Green = Ground
INSTALLATION & OPERATION
Electrical Connec�on:
Black wiring connects to Line
White wiring connects to Neutral
Green wiring connects to Ground
Wall/Ceiling/Floor Moun�ng Bracket:
bracket to the structure by using
FIGURE 1
horizontal facing down on ceiling
FIGURE 2
FIGURE 3
Figure 1
Figure 2
Figure 3
Wall Type Floor Type
Ceiling Type
LED Driver
BLACK (LINE)
GREEN (GROUND)
WHITE (NEUTRAL)
AC INPUT
( - ) ( + )
LEAN WIRES
TO LED LOAD
Terminal
Block
07/29/20 Pag
TECHNICAL SUPPORT
Tel: 317 916-4274 Fax:: 317 639-4279
Web: http://www.hornerlighting.com Email: techsppt@HornerETG.com
LMAN0071-01-EN
Hazardous Location Series
SERVICING
• To avoid personal injury, disconnect power to the light and allow the unit to cool down before
HOUSING
This manual suits for next models
1
Table of contents
