Kit Contents
2 x Solar Bollard Lights
With a quality finish and easily relocatable design, these
Solar Garden Path Lights are guaranteed to look fantastic
in any yard!
Lighting Modes
1 Constant dim light
A dim light is displayed continuously from dusk until dawn.
2 Sensor with dim light
A dim light is displayed continuously from dusk until
dawn. When motion is detected the light brightens for 25
seconds before returning to a dim light.
3 Sensor with bright light
The light will remain off until motion is detected then the
brightest light setting will be activated.
Activate the Light
STEP 1 Find a suitable location
Solar lights need access to direct sunlight for optimum
results, preferably 6-8 hours per day.
STEP 2 Activate the lights
Press and hold the white button on the bollard for 3
seconds to turn the light on and off. To change between
lighting modes, simply press the white button to select.
Be sure to clean the solar panel periodically to maintain
optimal performance.
Product Installation - Option 1
Masonry install.
Using an electric drill (hammer or rotary), drill a hole with
an 8mm masonry drill bit, hammer plugs into place and
then secure the screws.
Product Installation - Option 2
Timber install.
Using an electric drill, drill a pilot hole with a 4mm drill bit
to guide the screws (plastic plugs not required).
Product Installation - Option 3
Using the Ground Spikes.
Push the spike into the base of the solar light until secured
then simply push into soft ground in your desired location.
Specifications
WARNING: do not use this light underwater
or in low lying puddles
Solar Panel 2.1W
Sensing Angle 120 degrees
Sensing Distance/
Delay Time
10 metres /
25 seconds
Lithium Battery 2200mAh / 3.7V
Charge Time 6–8 hours
Working Time 6–8 hours
