Hotass Saunas Himalayan Salt Light Box User manual

800-957-2862 www.HotAssSaunas.com1509-1220
Himalayan Salt Light Box
Installation and Operation Manual

CONSIDERATIONS
• Power supply should be installed in a dry accessible location.
• Light Box and power supply should be tested prior to installation
• Himalayan Salt Light Box
• Power Supply
• Power Cable
• Mounting Bracket and screws
Himalayan Salt Light Box
Dimensions: 5-1/2”H x 25-1/2”W x 2-1/4”D
Composition: Plywood, Cedar, Himalayan Salt
Weight: 11lbs
Power Supply
Operating Voltage: 120V
Output Voltage: 24VDC
Power Consumption: 18W
Nominal Amperage: .45 A / 120V
Dimensions: 2.97”L x 1.25”W x 1.87”D
White LED Light
Type: LED White Light
Operating Voltage: 24VDC
Power Consumption: 8.64 Watts per panel
Lumens: 933
INCLUDED
SPECIFICATIONS

3
INSTALLATION
1. Determine the desired locations for the following: Light Box, and Power
Supply.
Important: Power supply must be in an accessible, dry location. Note provided
cord lengths are 50’ maximum.
2. Install electrical boxes for the following: Light Box, and Power supply.
3. Run a 120VAC externally switched GFCI outlet to power electrical box
supplying power to Power Supply.
Note: Electrical outlet for power supply can be switched if installing switch near
room.
4. Route light extension cable from Power Supply to Salt Panel location.
5. Mount provided bracket on wall at determined location for Light Box.
6. Connect Light extension cable to Light Box then hang Light Box onto wall.
7. Plug power supply into GFCI outlet and verify light operation.
INSTALLATION DIAGRAM
MOUNTING BRACKET RECESSED INTO
BACK OF LIGHT BOX. LIGHT BOX SITS
FLUSH ON WALL.
WALL