HOTEL COLLECTION Penthouse User manual

Penthouse Scent Diffuser Instructions
Setting the Current Time
If your screen is unresponsive, press and hold [SET] for 20 seconds and try again after you hear it beep.
1. To set the current time, press [SET].
2. The Hour will now be flashing. Using [UP/DOWN], adjust the Hour and press [SET] to
confirm your choice.
3. The Minutes will now be flashing. Using [UP/DOWN], adjust the Minutes and press [SET] to
confirm.
4. An arrow will now be flashing below the Day of the Week. Using [UP/DOWN], adjust the
Day and press [SET] to confirm your choice.
5. Using [UP/DOWN], adjust the VOLUME to 120 (the size of your oil bottle in mL) and press
[SET] to confirm.
6. Using [UP/DOWN], adjust your LEVEL to 120 (the amount of oil in your bottle in mL) and
press [SET] to confirm.
7. Using [UP/DOWN], adjust your MILLILITERS to 1.0mL/hr and press [SET] to confirm.
Setting the Operating Hours
The Penthouse Scent Diffuser allows up to 5 individual Operating Events so you can scent at various
times on different days of the week.
Set the Start Time
1. Press [MODE].EVENT 1 ON will appear. This represents the On Time for the first operating
event.
2. Press [SET] and the Hour will flash. Press [UP/DOWN] to adjust.
3. Then press [SET] again for the Minutes to flash. Press [UP/DOWN] to adjust.
Note: Operating events are displayed following the 24-hour clock.
Example) 12:00 = 12:00 PM
24:00 = 12:00 AM

Set the Operating Days
1. Press [MODE], then [UP/DOWN] to toggle the Days of the Week.
2. Press [POWER] (in the center of the dial) to select which Days you want for this event. An
arrow under a day of the week indicates it has been selected. To Add/Remove the arrow
from under a day, select the day using [UP/DOWN] and press [POWER] to
activate/deactivate the arrow for that day.
3. Press [SET] once your choices are confirmed.
Example) If you wish to have Mon– Fri for EVENT 1; you will go through each day of the week to be
sure an arrow is displayed below only those days.
Set the End Time
1. Press [MODE].EVENT 1 OFF will appear. This represents the Off Time for the first operating
event.
2. Press [UP/DOWN] to adjust the Hour.
3. Then press [SET] again for the Minutes to flash. Press [UP/DOWN] to adjust.
Adjust the Scent Intensity
1. Press [MODE] after setting your time sequence. The display will show WORK. This is where
you will adjust the scent intensity for the EVENT.
2. Press [UP/DOWN] to select the amount of time the machine is scenting for. Press [MODE] to
confirm.
3. The display will now show PAUSE. Press [UP/DOWN] to select the amount of time the
machine is not scenting for.
Note: If you wish to have your settings work with your bottle size, we recommend the following for
the max amount of oil to be used within an average month of use for a 120mL oil:
Max Hours Per Week: 45
Max WORK: 130
Max PAUSE: 70
Finish the Setup
1. Press [Mode] and set Events 2-5 following the same order. If you only wish to create one
Operating Event, click [MODE] until you reach the end.
2. Ensure there are no conflicting settings.
Note: The unit cannot be set to run past midnight. You must split the setting between two different
operating event.

Example
On 11 PM - 4 AM, within 2 events:
EVENT 1 ON — 22:00
EVENT 1 OFF — 23:59
EVENT 2 ON — 00:01
EVENT 2 OFF — 04:00
Example for a 45hr Week
Note: Operating events are displayed following the 24-hour clock.
Mon – Friday: 7 – 9am / 13-16pm / 20-22pm
Sat – Sunday: 10 – 12pm / 20-23pm
This example equals 5 EVENTS and should allow your 120mL oil bottle to last anywhere from 25-30 days.
If you use less WORK and more PAUSE times, you may be able to prolong your oil for more usage.
Refilling the Diffuser
Be sure to adjust the Volume, Level, and mL/h on your device when refilling or switching the
fragrance oil.
1. Once you refill the bottle after you have cleaned your diffuser with rubbing alcohol, be sure
all parts are still connected properly and put back in place.
2. Press [SET] 5 times until you see LEVEL.
3. Press [UP/DOWN] to input the correct size of the bottle (120mL), letting the diffuser know it
has been filled. The color displayed should turn from Red to Green.
4. Press [SET] on the diffuser 2 times until the current display is showing once again.
Cleaning Instructions
Your Penthouse Scent Diffuser should be cleaned every 1-2 months and when switching fragrances
to ensure optimal performance.
1. Fill the empty oil bottle that comes with your diffuser 1 quarter of the way with rubbing
alcohol.
2. Screw the alcohol-filled bottle into the diffuser.
3. Run the diffuser for 15 minutes to ensure the alcohol can filter through the whole device.
Unplug the device from the wall outlet and keep the diffuser in an upright position. Wipe the
device with a damp cloth to remove oil stains and fingerprints. Avoid using any harsh or
abrasive cleaning products.
4. Remove the alcohol-filled bottle and insert the Hotel Collection Fragrance Oil of your choice.
You’re ready to begin scenting!

Disclaimers
●Please note, if your unit is not responding to your touch display, press and hold [SET] for 10
seconds until you hear it beep once and let go. It will unlock – to lock it, you will press and
hold down [SET] again for 10 Seconds.
●If you are not sure if you did your settings correctly and want to revert to factory settings,
press and hold [MODE] down for 10 seconds until you hear it beep 4 times and then let go.
The factory settings are Monday – Sunday from 8am to 22:00 (10pm), work 005, pause 160.
●The Penthouse Scent Diffuser comes with a 90-day limited warranty.
●All Hotel Collection diffusers are specifically designed to be used with Hotel Collection
Fragrance Oils. Using any other oils, adding water, or any other misuse of the diffuser will
void the 90-day warranty.