7
DISHWASHER
First of all.
- Turn on the water supply
tapcompletely.
-Addthe correctamountof
detergent.
- Load the baskets correctly.
- Check that the spray arms
rotate freely.
-Closethedoorsecurely.
-
Turnknob"A"toONyouwillhear
ashortbeep.Thedisplayturnson
and3dashesappear,theseindi-
cate that the dishwasher is now
awaitinginstructions.
Select the wash cycle.
Turnknob "M"untiltheindicatoris
inlinewiththenumberorsymbolfor
thecyclerequired.Selectthewash
cyclemostsuitableforthetypeof
dishestowash(see‘Programme
Chart’).
Afterafewseconds,youwillheara
short beep: the wash cycle has
startedandindicator"G"displays
thecyclephase startingsymbol.
The counter "L" will show the
amountoftimeleftuntiltheendof
thewashcycle.
- Do not expect a precise count-
downasthewashcyclestartswith
anestimatedcycletimethatisup-
datedasthecycleprogressesand
isalsoaffectedbysuchthings as
watertemperatureanddegreeof
soiling).
Indicatorlights.
Yourdishwasherisprovidedwith
anindicatorlight "G"with4symbols
whichcomeonastheappliancecar-
riesouteachphaseoftheselected
programme.
These indicator lights represent
eachphasecorrespondingto:
Modifying a wash cycle in
progress.
Ifyouhavechosenthewrongcycle
-Youcanmodifythewashcycle,if
ithasonlyjuststarted.Turnknob
"M"totheResetpositionandaftera
fewsecondsyouwillhear4beeps.
Indicatorlight"G"willgooutand3
dashes appear, this indicates all
settingshavebeencancelled.You
arenowfreeto re-set thecorrect
washcycle.
You've left out a dish?
Interruptthewashcyclebyturning
knob "A" to OFF, open the door
andinsertthedishyouhadforgot-
ten,closethedoorand turnknob
"A" toONagain.
Thecyclewillstartupfromwhere
youinterruptedit.
Cycle end
Theendofthewashcycleisindi-
catedby2beepsand ENDflashes
uponthedisplay.
Turnknob"M"totheResetposition
andthe3dashesforprogramming
cancellationwillappear.
Turnknob"A" toOFF toturnthe
applianceoff.
Turnoffthewatertap.
Waitafewminutesbeforeunload-
ingthedishes:theyareveryhot!If
youwaitalittlewhile,theydrybetter
due tothesteam.
Emptythelowerbasketfirst.
How to use your Dishwasher
Delaying the start of a
programme.
Whenyouhaveloadedthedishes,
youcanchoosewhentostartyour
dishwasherbeforesettingthewash
cycledesired.
Pressbutton"P"andyoucandelay
thestartofthewashcycleby1to
24 hours.Pressthebuttononce,a
beep will sound and the wording
“24h”willcomeupionthedisplay.
Theneachtimeyoupressthebutton
a beep will sound and the hours
willdecreasebyonehouruntiluntil
the delay is 01h. If you press the
button again the delayed start is
cancelledand3dashesappearon
thedisplay.
Onceyouhavesetthedelayedstart
time,selectthewashcycleonknob
“M”afterabeepsoundsindicator
light"H"flashesonthedisplay and
thecountdownbegins(indicatedon
thedisplayonehouratatime).
Thedisplaywillkeepyouinformed
of the countdown progress at all
times.
Half load.
Yourdishwasheralsoallowsyouto
washhalfaload(usingonebasket),
tosavewater,electricityanddeter-
gent(useonlyhalftheamount).
Beforesettingawashcycle,press
button"I".Eachtimeyoupressit,
youwillhearabeepandsymbol
(upperbasket)andsymbol
(lowerbasket)appearon
indicator"N".Pressthebuttononce
moretoresetthebasketselection
andthedishwasherwillagainbeset
tousebothbaskets.
“Extra” drying
If you want your dishes to be
perfectlydry:turnknob“M”tothe
Resetposition,selectthebasket/s
to be used and delayed start if
required.
Startthewashcycleasnormal.
Indicator“G”willshowsymbol
when it has reached the drying
phase. The symbol will flash for
approximately4secondsandthe
wordOFFappearsonthedisplay
(extradryingdisabled).
Ifyouimmediatelypressbutton“I”,
youwillhearaprolongedbeepand
the word ON will appear on the
displayandextradryinghasbeen
selected.
Onceyouhavecompletedallyour
selections,shutthedoor.Youwill
hear a beep and the wash cycle
willstart,eitherimmediatelyorafter
thedelayedstartifselected.
Rememberthatwithextradrying
selectedthe programme will last
longer.
pre-wash,wash, rinses, drying.
Atalltimes yourdishwashertells
youwhatphaseitisat.
During the countdown you can
modifythedelaybypressingbutton
“P”repeatedlywithoutresettingthe
washcycle.
Ifyouhavechangedyourmindand
wish to start the wash cycle
immediately,pressbutton“P”until
the3dashesappearonthedisplay
to indicate delayed start is
cancelled.Indicatorlight“H”willgo
out and the cycle will start at the
soundofabeep.
There's been a power
failure or you opened the
dishwasherdoor
The wash cycle stops and then
restartswhentheelectricitycomes
backonorwhenyouclosethedoor.