Hotpoint 7HPC 640 T GH /HA User manual
English
Operating Instructions
HOB
Contents
Operating Instructions,1
Warnings,2
Assistance,4
Description of the appliance,5
Installation,6
Start-up and use,11
Precautions and tips,11
Maintenance and care,12
Troubleshooting,12
7HPC 640 T GH /HA
7HPC 640 T R/HA
7HPC 640 T X /HA
7HPC 640 /HA
7HPC 640 X /HA
7HPC 631 X /HA
7HPC 640 GH /HA
7HPC 640 N /HA
7HPC 640 N GH /HA
7HPC 640 N X /HA
GPN 64 TA CI RFH
GPN 64 TO CI RFH
GPN 64 NI RFH
GPN 64 NCI RFH
GPN 64 NW RFH
2
Warnings
WARNING: The appliance and its
accessible parts become hot during use.
Care should be taken to avoid touching
years of age shall be kept away unless
continuously supervised. This appliance
and above and persons with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and
user maintenance shall not be made by
children without supervision.
WARNING: Unattended cooking on a hob
with fat or oil can be dangerous and may
items on the cooking surfaces.
WARNING: If the surface in glass-ceramic
is cracked, switch off the appliance to
avoid the possibility of electric shock.
Never use steam cleaners or pressure
cleaners on the appliance.
Remove any liquid from the lid before
opening it. Do not close the glass cover (if
present) when the gas burners or electric
hotplates are still hot.
The appliance is not intended to be
operated by means of an external timer
or separate remote control system.
CAUTION: the use of inappropriate hob
guards can cause accidents.
3
4
Assistance
Communicating:
• appliance model (Mod.)
• serial number (S/N)
This information is found on the data plate located on the
appliance and/or on the packaging.
5
Description of the appliance
Overall view
1. Support Grid for COOKWARE
2. GAS BURNERS
Control Knobs for GAS BURNERS
4. Ignition for GAS BURNERS
5. SAFETY DEVICES
• GAS BURNERS differ in size and power. Use the
diameter of the cookware to choose the most appropriate
burner to cook with.
• Control Knobs for GAS BURNERS adjust the size of the
• GAS BURNER IGNITION
be lit automatically.
• SAFETY DEVICE
accidentally extinguished.
1.
2.
4.
5.
•
•
5
4
1
2
3
6
GB
Installation
!Before operating your new appliance please read this
instruction booklet carefully. It contains important information
for safe use, installation and care of the appliance.
!Please keep these operating instructions for future reference.
Pass them on to possible new owners of the appliance.
Positioning
!Keep packaging material out of the reach of children. It can
become a choking or suffocation hazard (see Precautions
and tips).
!
according to the instructions provided. Incorrect installation
may cause harm to people and animals or may damage
property.
!This unit may be installed and used only in permanently
ventilated rooms in accordance with current national
regulations. The following requirements must be observed:
• The room must be equipped with an air extraction system
that expels any combustion fumes. This may consist of
a hood or an electric fan that automatically starts each
time the appliance is switched on.
In a chimney stack or branched flue.
(exclusively for cooking appliances)
Directly to
the Outside
• The room must also allow proper air circulation, as air is
must not be less than 2 m/h per kW of installed power.
The air circulation system may
take air directly from the outside
by means of a pipe with an inner
cross section of at least 100 cm2;
the opening must not be vulnerable
to any type of blockages.
The system can also provide the air
needed for combustion indirectly,
air circulation tubes as described
above. However, these rooms must
not be communal rooms, bedrooms
hazard.
than air. Therefore, rooms containing LPG cylinders must
also be equipped with vents to allow gas to escape in
A
Examples of
ventilation holes
for comburant air.
Enlarging the ventilation slot
between window and floor.
Adjacent
Room
Room to be
Vented
the event of a leak. As a result LPG cylinders, whether
partially or completely full, must not be installed or stored
in rooms or storage areas that are below ground level
(cellars, etc.). It is advisable to keep only the cylinder
being used in the room, positioned so that it is not subject
stoves, etc. ) which could raise the temperature of the
cylinder above 50°C.
Fitting the appliance
The following precautions must be taken when installing
the hob:
• Kitchen cabinets adjacent to the appliance and taller than
the top of the hob must be at least 600 mm from the edge
of the hob.
• Hoods must be installed according to their relative
installation instruction manuals and at a minimum
• Place the wall cabinets adjacent to the hood at a minimum
If the hob is installed beneath a wall
cabinet, the latter must be situated
at a minimum of 700 mm above
the hob.
Before the installation remove the grids and burners from
the hob and turn it upside down, making sure you don’t
damage the thermocouples and spark plugs.
Apply the seals that come with the appliance along the outer
edges of the hob to prevent any passage of air, humidity
and water (see Figure).
For proper application make sure the surfaces to be sealed
are clean, dry and free of any grease/oil.
• The installation cavity should have the dimensions
Fastening hooks are provided, allowing you to fasten
the hob to tops that are between 20 and 40 mm thick.
To ensure the hob is securely fastened to the top, we
recommend you use all the hooks provided.
600mm min.
420mm min.
650mm min.
GB
7
555 mm
55 mm
475 mm
Hook fastening diagram
Hooking position Hooking position
for top H=20mm for top H=30mm
Front
Hooking position Back
for top H=40mm
!Use the hooks contained in the “accessory pack”.
• Where the hob is not installed over a built-in oven, a
wooden panel must be installed as insulation. This must
be placed at a minimum distance of 20 mm from the lower
part of the hob.
Ventilation
To ensure adequate ventilation, the back panel of the cabinet
must be removed. It is advisable to install the oven so that it
with an opening of at least 45 x 560 mm (see diagrams).
560 mm.
45 mm.
Where a hob is installed above an oven without a forced
ventilation cooling system, adequate ventilation must be
provided inside the cabinet by means of air holes through
Electrical connection
Hobs equipped with a three-pole power supply cable are
designed to operate with alternating current at the voltage and
frequency indicated on the data plate (this is located on the
lower part of the appliance). The earth wire in the cable has a
green and yellow cover. If the appliance is to be installed above
a built-in electric oven, the electrical connection of the hob and
the oven must be carried out separately, both for electrical
safety purposes and to make extracting the oven easier.
Connecting the supply cable to the mains
Install a standardised plug corresponding to the load
indicated on the data plate.
The appliance must be directly connected to the mains
using an omnipolar circuit-breaker with a minimum contact
mains. The circuit-breaker must be suitable for the charge
indicated and must comply with current electrical regulations
(the earthing wire must not be interrupted by the circuit-
breaker). The supply cable must not come into contact with
surfaces with temperatures higher than 50°C.
!The installer must ensure that the correct electrical
connection has been made and that it is compliant with
safety regulations.
Before connecting to the power supply, make sure that:
• The appliance is earthed and the plug is compliant with
the law.
• The socket can withstand the maximum power of the
appliance, which is indicated on the data plate.
• The voltage is in the range between the values indicated
on the data plate.
• The socket is compatible with the plug of the appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it. Do not use extension
cords or multiple sockets.
!Once the appliance has been installed, the power supply
cable and the electrical socket must be easily accessible.
!The cable must not be bent or compressed.
!The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
!The manufacturer declines any liability should these safety
measures not be observed.
Gas connection
The appliance should be connected to the main gas supply
or to a gas cylinder in compliance with current national
regulations. Before carrying out the connection, make sure
the cooker is compatible with the gas supply you wish to
8
GB
use. If this is not the case, follow the instructions indicated
in the paragraph “Adapting to different types of gas.”
When using liquid gas from a cylinder, install a pressure
regulator which complies with current national regulations.
!Check that the pressure of the gas supply is consistent with the
This will ensure the safe operation and longevity of your
Connection with a rigid pipe (copper or steel)
!Connection to the gas system must be carried out in such a
way as not to place any strain of any kind on the appliance.
leaks. The seal must always be replaced after rotating the
threaded attachment
male attachment.
These pipes must be installed so that they are never longer
than 2000 mm when fully extended. Once connection has
does not touch any moving parts and is not compressed.
!Only use pipes and seals that comply with current national
regulations.
Checking the tightness of the connection
!When the installation process is complete, check the pipe
Adapting to different types of gas
To adapt the hob to a different type of gas other than default
type (indicated on the rating plate at the base of the hob or
on the packaging), the burner nozzles should be replaced
as follows:
1. Remove the hob grids and slide the burners off their
seats.
2. Unscrew the nozzles using a 7 mm socket spanner, and
replace them with nozzles for the new type of gas (see
table 1 “Burner and nozzle characteristics”).
the reverse order.
sticker with one indicating the new type of gas used.
Sticker are available from any of our Service Centres.
Replacing the Triple ring burner nozzles
1. Remove the pan supports and lift the burners out of their
housing. The burner consists of two separate parts (see
pictures).
2. Unscrew the nozzles using a 7 mm socket spanner.
for use with the new type of gas (see Table 1). The two
nozzles have the same hole diameter.
operations in reverse order.
• Adjusting the burners’ primary air Does not require
adjusting.
• Setting the burners to minimum
2. Remove the knob and adjust the adjustment screw, which
small but steady.
while the burner is alight, quickly change the position
of the knob from minimum to maximum and vice versa
4. Some appliances have a safety device (thermocouple)
using the adjusting screw.
5. Once the adjustment has been made, replace the
seals on the by-passes using sealing wax or a similar
substance.
!If the appliance is connected to liquid gas, the regulation
screw must be fastened as tightly as possible.
!
sticker with one indicating the new type of gas used. Stickers
are available from any of our Service Centres.
!Should the gas pressure used be different (or vary slightly)
from the recommended pressure, a suitable pressure
with current national regulations).
GB
9
Electrical
connections
DATA PLATE
see data plate
This appliance conforms to the following
European Economic Community directives:
- 2006/95/EEC dated 12/12/06 (Low
Voltage) and subsequent amendments
- 2004/108/EEC dated 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2009/142/EEC dated 30/11/09 (Gas) and
subsequent amendments.
- 2012/19/EC and subsequent
amendments.
10
GB
Table 1 Liquid Gas Natural Gas
Burner Diameter Thermal Thermal By-pass Nozzle Flow* Thermal Nozzle Flow*
power power 1/100 1/100 (g/h) power 1/100 (l/h)
kW kW kW
(p.c.s.*) (p.c.s.*) (p.c.s.*)
(mm) Reduced Nominal (mm) (mm) *** ** Nominal (mm)
Fast (R)
100 0,70 3,00 39 86 218 214 3,00 132 (H) 286
Reduced Fast (RR) 100 0,70 2,60 39 80 189 186 2,60 122 (H) 248
Semi Fast (S) 75 0,40 1,65 28 64 120 118 1,65 96 157
Auxiliary (A) 55 0,40 1,00 28 50 73 71 1,00 79 (6) 95
Triple Crown (TC) 130 1,50 3,30 61 65x2 240 236 3,30 103 x 2 343
Supply Pressures
Nominal (mbar)
Minimum (mbar)
Maximum (mbar)
28-30
20
35
37
25
45
20
17
25
* At 15°C and 1013,25 mbar - dry gas
** Propane P. C.S. = 50.37 MJ/Kg
*** Butane P. C.S. = 49.47 MJ/Kg
Natural P. C.S. = 37.78 MJ/m³
Burner and nozzle specifications
7HPC 631 /HA
7HPC 631 X/HA
RØ145
S
7HPC 640 /HA
7HPC 640 X/HA
7HPC 640 GH/HA
7HPC 640N /HA
7HPC 640N GH/HA
7HPC 640N X /HA
PC 640N /HA
PC 640N X/HA
GPN 64 O CI RFH
GPN 64 A CI RFH
GPN 64 NW RFH
GPN 64 NCI RFH
GPN 64 NI RFH
RS
S
AA
7HPC 640 T GH /HA
7HPC 640 T R /HA
7HPC 640 T X /HA
GPN 64 TA CI RFH
GPN 64 TO CI RFH
RR TC
S
A
GB
11
Start-up and use
!The position of the corresponding gas burner or electric
hotplate* is shown on every knob.
Gas burners
using the corresponding control knob:
Maximum
Minimum
To light one of the burners, hold a lit match or lighter near
the burner and, at the same time, press down and turn the
corresponding knob anti-clockwise to the maximum setting.
When using models with an ignition button, light the desired
burner pressing down the corresponding knob as far as possible
and turning it anticlockwise towards the maximum setting.
!
knob and wait for at least 1 minute before trying to relight it.
To switch off the burner, turn the knob in a clockwise
Practical advice on using the burners
• Use appropriate cookware for each burner (see table)
the cookware.
• When the contents of the pan reach boiling point, turn
the knob to minimum.
Burner
Rapid (R)
Reduced Rapid (RR)
Semi-Rapid (S)
Auxiliary (A)
Triple Crown (TC)
Ø Cookware Diameter (cm)
24 - 26
24 - 26
16 - 20
10 - 14
24 - 26
To identify the type of burner, refer to the designs in the
Precautions and tips
!This appliance has been designed and manufactured
in compliance with international safety standards. The
following warnings are provided for safety reasons and
must be read carefully.
General safety
• This is a class 3 built-in appliance.
follow the instructions provided in the paragraph on
“Positioning” the appliance.
• These instructions are only valid for the countries
whose symbols appear in the manual and on the
serial number plate.
• The appliance was designed for domestic use inside the
home and is not intended for commercial or industrial use.
• The appliance must not be installed outdoors, even in
covered areas. It is extremely dangerous to leave the
appliance exposed to rain and storms.
• Do not touch the appliance with bare feet or with wet or
damp hands and feet.
• The appliance must be used by adults only for the
outlined in this booklet. Any other use of the appliance
(e.g. for heating the room) constitutes improper use and
is dangerous. The manufacturer may not be held liable
unreasonable use of the appliance.
appliances do not come into contact with the hot parts
of the oven.
• The openings used for ventilation and dispersion of heat
must never be covered.
” position
when the appliance is not in use.
• When unplugging the appliance always pull the plug from
the mains socket, do not pull on the cable.
• Never carry out any cleaning or maintenance work
without having detached the plug from the mains.
• In case of malfunction, under no circumstances should
you attempt to repair the appliance yourself. Repairs
carried out by inexperienced persons may cause injury
or further malfunctioning of the appliance. Contact a
Service Centre (see Assistance).
• Always make sure that pan handles are turned towards
the centre of the hob in order to avoid accidental burns.
• Do not close the glass cover (if present) when the gas
burners or electric hotplates are still hot.
• Do not leave the electric hotplate switched on without a
pan placed on it.
• Do not use unstable or deformed pans.
• Remove any liquid from the lid before opening it.
• The appliance should not be operated by people
(including children) with reduced physical, sensory or
mental capacities, by inexperienced individuals or by
anyone who is not familiar with the product. These
individuals should, at the very least, be supervised by
someone who assumes responsibility for their safety or
receive preliminary instructions relating to the operation
of the appliance.
12
GB
• Do not let children play with the appliance.
• The appliance is not intended to be operated by
control system.
Disposal
• When disposing of packaging material: observe local
legislation so that the packaging may be reused.
that old household electrical appliances must not
be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected
separately in order to optimise the recovery and
recycling of the materials they contain and reduce
the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose
of the appliance it must be separately collected.
Consumers should contact their local authority or retailer
for information concerning the correct disposal of their
old appliance.
Maintenance and care
Switching the appliance off
Disconnect your appliance from the electricity supply before
carrying out any work on it.
Cleaning the appliance
!Do not use abrasive or corrosive detergents such as stain
removers, anti-rust products, powder detergents or sponges with
abrasive surfaces: these may scratch the surface beyond repair.
!Never use steam cleaners or pressure cleaners on the
appliance.
• It is usually enough to wash the hob with a damp sponge
and dry it with absorbent kitchen roll.
• The removable parts of the burners should be washed
frequently with warm water and soap and any burnt-on
substances removed.
• For hobs which ligth automatically, the terminal part of
the electronic instant lighting devices should be cleaned
frequently and the gas outlet holes should be checked
for blockages.
• Stainless steel can be marked by hard water that has
been left on the surface for a long time, or by aggressive
detergents containing phosphorus. After cleaning, rinse
and dry any remaining drops of water.
Gas tap maintenance
If this happens, the tap must be replaced.
!
technician authorised by the manufacturer.
Troubleshooting
It may happen that the appliance does not function properly
or at all. Before calling the service centre for assistance,
check if anything can be done. First, check to see that there
are no interruptions in the gas and electrical supplies, and,
in particular, that the gas valves for the mains are open.
around the burner.
Check whether:
• The gas holes on the burner are clogged.
• All the movable parts that make up the burner are
mounted correctly.
• There are draughts near the appliance.
Check to make sure that:
• You pressed the knob all the way in.
• You keep the knob pressed in long enough to activate
the safety device.
• The gas holes are not blocked in the area corresponding
to the safety device.
The burner does not remain lit when set to minimum.
Check to make sure that:
• The gas holes are not blocked.
• There are no draughts near the appliance.
• The minimum setting has been adjusted properly.
The cookware is unstable.
Check to make sure that:
• The cookware is positioned correctly at the centre of the
burner.
• The pan support grids have been positioned correctly.
13
RU
!
!
!
!
2
A
600mm min.
420mm min.
650mm min.
14
RU
555 mm
55 mm
475 mm
H=20mm H=30mm
H=40mm
!
560 mm.
45 mm.
15
RU
!
!
!
!
!
!
!
!
1 C
2 O
1
3
16
RU
!
!
!
Электропитание
ЗАВОДСКАЯ ТАБЛИЧКА
см. заводскую табличку
Данное изделие соответствует
следующим Директивам
Европейского Сообщества:
2006/95/CEE от 12/12/06 (Низкое
напряжение) с последующими
изменениями - 2004/108/СЕЕ от
15/12/04 (Электромагнитная
совместимость) с последующими
изменениями - 93/68/СЕЕ от
22/07/93 с последующими
изменениями. - 2009/142/СЕЕ от
30/11/09 (Газ) с последующими
изменениями; - 2012/19CEE с
последующими изменениями
17
RU
Таблица 1
Сжиженный газ
Природный газ
Kонфорка
Диаметр
Теплотворная
Байпас
Форсунка
Расход
*
Теплотворная
Форсунка
Расход
*
способность
1/100 1/100
г/час
способность
1/100
л/час
кВт (p.c.s.*)
кВт (p.c.s.*)
(мм)
Номин.
Сокращ
(мм)
(мм)
*** **
Сокращ
(мм)
Быстрая (R)
100 0,70 3,00 39 86 218 214 3,00 132 (H) 286
Быстрая (RR)
100 0,70 2,60 39 80 189 186 2,60 122 (H) 248
Полубыстрая (S)
75 0,40 1,65 28 64 120 118 1,65 96 157
Вспомогательная (А)
55 0,40 1,00 28 50 73 71 1,00 79 (6) 95
Тройная (ТС)
130 1,50 3,30 61 65x2 240 236 3,30 103 x 2 343
Давление подачи
Номинальное (мбар)
Минимальное (мбар)
Максимальное (мбар)
28-30
20
35
37
25
45
20
17
25
Характеристики горелок и форсунок
* При температуре 15°C и давлении 1013,25 мбар – сухой газ
** Пропан Теплотворная способность = 50,37 МДж/кг
*** Бутан Теплотворная способность = 49,47 МДж/кг
Природный газ Теплотворная способность = 37,78 МДж/м
3
7HPC 631 /HA
7HPC 631 X/HA
RØ145
S
7HPC 640 /HA
7HPC 640 X/HA
7HPC 640 GH/HA
7HPC 640N /HA
7HPC 640N GH/HA
7HPC 640N X /HA
PC 640N /HA
PC 640N X/HA
GPN 64 O CI RFH
GPN 64 A CI RFH
GPN 64 NW RFH
GPN 64 NCI RFH
GPN 64 NI RFH
RS
S
AA
7HPC 640 T GH /HA
7HPC 640 T R /HA
7HPC 640 T X /HA
GPN 64 TA CI RFH
GPN 64 TO CI RFH
RR TC
S
A
18
RU
!
!
Конфорка ø Диаметр кастрюли (см)
Быстрая сокращенная (RR)
24 – 26
24 – 26
Средняя(S)
16 – 20
Малая(А)
10 – 14
24 – 26
Быстрая (Большая)(R)
Тройная (ТС)
!
19
RU
!
!
!
.
.
20
RU
.
.
195114025.01
10/2013 - XEROX FABRIANO
This manual suits for next models
14
Table of contents
Other Hotpoint Hob manuals
Hotpoint
Hotpoint G640 User manual
Hotpoint
Hotpoint CRO 642 D B User manual
Hotpoint
Hotpoint GX641FGK User manual
Hotpoint
Hotpoint 7HPC 640 T GH RU User manual
Hotpoint
Hotpoint GP641X User manual
Hotpoint
Hotpoint Signature CIS640B User manual
Hotpoint
Hotpoint GB 630 R T X User manual
Hotpoint
Hotpoint CIS 644 DD Z S User manual
Hotpoint
Hotpoint GE640TX User manual
Hotpoint
Hotpoint GE760RX User manual
Hotpoint
Hotpoint KEC 635 T C User manual
Hotpoint
Hotpoint G640N User manual
Hotpoint
Hotpoint GE75DX User manual
Hotpoint
Hotpoint GC640BK User manual
Hotpoint
Hotpoint KRH 600 B User manual
Hotpoint
Hotpoint PCN 641 T/IX/H User manual
Hotpoint
Hotpoint E320SIX User manual
Hotpoint
Hotpoint CIO 644 DD Z User manual
Hotpoint
Hotpoint PK 644 D GH X /HA G User manual
Hotpoint
Hotpoint CRA 641 DC User manual
