Hotpoint E6005 User manual

Instructions for Installation and Use
Electric Hob
Models: E7134-E6005
TotheInstaller
Before installation fill in the product details on the back cover of this book.
Theinformationcan be found ontherating plate.
TotheUser
Youmustreadthe instructions prior to installing and using the appliance and
thenretainthemforfuturereference.

2
CONTENTS
Retention of this Instruction Book
This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of
theappliance.
If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also
providedso the new owner can become familiar with theappliance and safety warnings.
If the Book is lost or damaged a copy may be obtained from:
Merloni Elettrodomestici LTD,MorleyWay,Peterborough, PE2 9JB
Introduction
Advice and recommendations
Installation and fastening
Electrical Connection
Cooking zone description
The controls
Operation
The safety devices
Maintenance and care
After Sales Service
Hotpoint Guarantee
Key Contacts
3
4
5
6
7
8
9
10
11
12
13
Back Cover

3
Your new hob is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been
installed in accordance with the installation instructions detailed in this booklet.
To help make best use of your cooking equipment, please read this booklet carefully.
Thehob is designedspecifically for domesticuse and responsibilitywill not beaccepted for usein any otherinstallation.
Introduction
*The guarantee is subject to the provisions that the appliance:
(a) Has been used solely in accordance with this booklet.
(b) Has been properly connected to a suitable supply voltage as stated on the rating plate, attached to the
appliance.
(c) Has not been subjected to misuse or accident or been modified or repaired by any person other than the
manufacturers authorised employee or agent.
(d) Has been correctly installed.
This appliance conforms with the following European Economic Community directives:
- 73/23/EEC of 19/02/73 (LowVoltage) andsubsequent modifications;
- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) andsubsequent modifications;
- 90/396/EEC of 29/06/90 (Gas) and subsequentmodifications;
- 93/68/EEC of 22/07/93and subsequent modifications.

4
Advice and recommendations
• This appliance was designed for non-professional,
household use.
• Before using theappliance,read the instructions in the
owner’s manual carefully since it contains all the
instructions you require to ensure safe installation, use
andmaintenance.Keepthisowner’smanual in a safeplace
for future reference.
• When you have removed the packing, check whether
the appliance is intact. If you have any doubts, contact a
qualified professional before using the appliance.
• Never leave the packing components (plastic bags,
polystyrene foam, nails, etc.) within the reach of children
since these are a source of potential danger.
• The appliance must be installed by a qualified
technician in compliance with the instructions provided
by the manufacturer.
• The latter denies all responsibility for improper
installation which may harm persons and animals and
damage property.
• The electrical safety of this appliance can only be
guaranteedifthe latter iscorrectly and efficiently earthed,
incompliance with regulations on electrical safety.Always
ensure that this vital safety measure has been taken. If
you haveanydoubts,call in a qualifiedtechnicianto check
the electrical system thoroughly.
• The manufacturer denies all responsibility for damage
resulting from a system which has not been earthed
correctly.
• Before powering the appliance, check whether the
technical characteristics featured on the appliance data
platecorrespondwiththoseof the mains electricalsystem.
• Check that the current load of the mains supply and of
the power sockets is suitable for the maximum power of
the appliance, indicated on the appliance data plate. If in
doubt, contact a qualified professional.
• This appliance must only be used for the purpose for
which it was expressly designed.Any other use (such as
heating a room for example) is considered to be improper
and consequently dangerous.
• The manufacturer denies all responsibility for damage
resulting from improper or incorrect use of the appliance.
• Certain fundamental rules must be followedwhenusing
electrical appliances. The following are of particular
importance:
First use:theglueused on the hob seals may leave greasy traces on the glass surface.We recommend youwipe these
off before using the appliance, with the aid of a non abrasive cleaner.During the first few hours of use, you may detect
a smell of rubber, which will disappear quickly.
• donot touch the appliancewith wet or damphands,
• never use the appliance when barefoot,
• never use extensions,
• never pull on the power supply cable or the
appliance itself to unplug it from the mains socket,
• never leave the appliance exposed to atmospheric
agents (rain, sun, etc.),
• donotallowchildrenorpersonswhoare not familiar
with the appliance to use it without supervision.
• Always unplug the appliance from the mains or switch
off the main switch before cleaning or performing any
cleaning or maintenance operations.
• If the surface of the glass cracks, unplug the
appliance immediately.For any repairs, contact only an
authorisedafter-salesservicecentre and demand original
spare parts. Failure to comply with the above may com-
promise the safety of the appliance.
• Cut the power supply cable after disconnecting it from
thepowermainswhenyoudecide not tousetheappliance
any longer. Also make all potentially dangerous parts of
the appliance safe, above all for children who could play
with the appliance.
• The glass ceramic hob is resistant to thermal and
mechanical shocks. However, it may break due to a
shock caused by a sharp object, such as a tool for
example. In this case, unplug the appliance
immediately and contact an authorised after-sales
service centre to have it repaired.
• Remember that the heating area stays hot for at least
half an hour after being turned off; please refrain from
placing any cookware or other items on the cooking zone
while still hot.
• Do not turn on the heating zones if aluminium foil or
plastic items have been placed on the hob surface.
• Do not go near the heating zones when these are still
hot.
• Ifyouuse small electric appliances near thehob, make
sure their power supply cable does not come into contact
with the hot parts of the hob.
• Makesureall pan handles arealways pointing inwards
towards the centre of the hob to prevent any accidental
spills.

5
Thefollowing instructions areintended for a qualifiedfitter
to guide him/her along the installation, adjustment and
technicalmaintenanceproceduresascorrectlyaspossible
and in full compliance with the applicable norms in force.
Important : unplug the hob before all operations.
Installation
• Thishobcanbebuiltinto a worktop simply bycutting
out the corresponding slot.
• Theworktopmustbemadewithamaterial designed
to withstand a temperature of approximately 100°C.
• The hob should be positioned at least 40 mm away
fromthe backwallor anyothervertical surfacein order
to allow for correct ventilation and to prevent the
surfaces around the appliance from overheating.
• If you wish to install the hob on top of an oven, the
latter must be fitted with a cooling fan.
• Trytoavoidinstallingthehobontop of a dishwasher;
if this is unavoidable, place a watertight separating
element between the two appliances.
10
Distance to
keep between the
cut-out slot and
the cabinet
Fastening
Very important: It is vital that you ensure the glass
ceramichob is builtinto a perfectly flat supporting surface.
Deformations due to improper fastening could alter the
characteristics of the hob and compromise its performan-
ce.
The fastening springs are fastened by screws (see
diagram).
It is vital that these screws be kept accessible at all
times.
Insert the hob into the cut-out slot, applying pressure all
along the perimeter of the hob frame so that the latter
adheres fully to the worktop.
FRONT OF HOB
KITCHEN
WORKTOP
30
40
REAR SPRING ASSEMBLY
HOB FROM BELOW
Installation and fastening
690
520
560 +/- 1
490 +/- 1
48

6
Technical characteristics
Electrical connection
• The electrical safety of this appliance can only be
guaranteed if the latter is correctly and efficiently
earthed, in compliance with regulations on electrical
safety.Always ensure thatthis vital safetymeasurehas
been taken. If you have any doubts, call in a qualified
technician to check the electrical system thoroughly.
• The manufacturer denies all responsibility for
damage resulting from a system which has not been
earthed correctly.
• Before powering the appliance, check whether the
technicalcharacteristicsfeaturedon the appliance data
plate correspond with those of the mains electrical
system.
• Checkthat thecurrent load of themains supply and
ofthepowersocketsis suitablefor the maximumpower
ofthe appliance,indicatedon the appliancedata plate.
If in doubt, contact a qualified professional.
Disconnect the appliance from the electricity supply
before all operations.
Connect your hob to the electrical system by means of a
junction box: if the appliance is connected permanently
to the mains, an omnipolar circuit breaker, accessible if
necessary, with a minimum contact opening of 3 mm
should be installed.
Valid only for models with a power supply cable for
three-phase connections
Some models are supplied with a three-phase power
supply cable, and should consequently only be con-
nected to the three-phase mains.Observe the wire col-
ours, as indicated in the diagram attached.
Some models are not fitted with a power supply cable, as
thecableshouldbe sizedaccordingtothetypeofelectrical
connectioninuse(seeconnectiontablebelow).To connect
the cable, proceed as follows:
• Using a screwdriver, prise on the side tabs of the
terminal board cover;
• Pull open the cover of the terminal board.
LN
12345
To install the cable, proceed as follows:
• unscrewthewire clamp screwandthe contact screws.
• to make the desired electrical connection (see table),
use the jumpers housed inside the box. Position the
power supply cable wires according to the indications
in the table.
• once the connections have been made, tighten all the
terminal screws fully.
• Fasten the supply cable in place with the clamp and
close the cover of the terminal board.
This appliance conforms with the following European
Community Directives:
- 73/23/EEC of 19/02/73 (LowVoltage)and subsequent
amendments;
- 89/336/EEC of03/05/89(Electromagneticcompatibility)
andsubsequent amendments;
- 93/68/EEC of22/07/93 and subsequentamendments;
Warning: If the hob is fitted above a built-in oven, the hob
and the oven must be connected to the mains separately
for safety reasons and to simplify operations when it is
necessary to pull the oven out for some reason.
Electrical connections Voltage,
Frequency Fuses, Sections
230V-1+N~50 Hz 25 A*
2,5 mm²
* Application of the simultaneity coefficient in accordance with
cei 60335-2-6 norm

7
Cooking zone description
Radiant zones
This type of burner consists of several coils that guarantee the even distribution of heat over the bottom of the pan and
ensure the success of all cooking on low heat:simmering, sauces or reheating.
Each zone is controlled:
• by a selector key whose silk screen printing
reproduces the cooking zone drawing,
• andbyapoweradjustment set comprising twoparts
(+,-).
A specific key controls the extension of the zones
(concentric or oval).
As long as the temperature of the cooking zones remains
above60°C, even after use,the residual heat indicators
stay on (the power indicator displays H) to prevent the
risk of burns.
The table below features information on how to use the
zones to their full potential.
Power Type of dish
1 Melted butter or chocolate
2
3 Reheating liquids
4 Preparation of creams and sauces
5 Cooking stews, blanquette, desserts
6 Cooking pasta and rice
7
8 Sealing meat, fish, omelettes
9 Fried food
HOBS ET7134 ET6004
Cooking zones Power
(in W) Diameter (in mm) Diameter (in mm) Diameter (in mm)
Back left RD 1000/2300 230 2300 210
Front left R 1400 160 1200 140
Back right RO 1100/2000 210 1400 160
Front right R 600 100 1800 180
Overall power 6300 6700
H = halogen,
R = simple radiant,
RO = oval radiant,
RD = dual radiant,

8
The controls
1. ON/OFF key
2. Cooking zone selector keys
3. Power (from 0 to 9) and residual heat indicators (H)
4. Zone selection indicator:
• on: the corresponding zone is selected and can be
modified,
• off: the corresponding zone is not selected, no
modification can be made.
5. Power increase key
6. Power decrease key
7. Extendable cooking zone(s) (concentric or oval)
extensionkey:featuredbyhobsfittedwith1or2extendable
zones
8. Themaximumzoneonindicatorlightfortheextendable
zones (concentric or oval):fitted beside each extendable
cooking zone
9. Timer control key for cooking time programming (only
on hobs fitted with a timer)
10.Programmed cooking time indicator
11.Indicator light corresponding to the programmed
cooking zone
12.Controls lock key
13.Lock indicator light
Note
• The extendable zone(s) extension key (7) and the relative indicator lights (8) are only fitted on hobs featuring
extendable cooking zones (concentric or oval).
• The timer control key (9), the cooking time indicator (10) and zone indicator lights (11) are only fitted on hobs
featuring a timer.

9
Operation
When you connect the hob to the power supply, a beep
will sound after a few seconds:you can now turn the hob
on.
Turning on the hob
Press key for 3 seconds to turn the hob on.
Cooking zone control
Each cooking zone is operated by a control key and by a
power adjustment set (+ and -).
8.
8. 8.
8.
Turning on a cooking zone
• To turn a cooking zone on, press the corresponding
control key and set the desired heating power (from 0 to
9) using the “+” and “-” keys.
• To set the maximum power directly (9), press key “-”
briefly.
• To speed up the rise in temperature on a particular
cooking zone, proceed as follows:
1. setthe cooking zonepowertothe maximum setting
(9),
2. then press the “+” key:the power display will indi-
cate “A”,
3. now set the power you wish to cook with (for
example 5).
When this temperature is reached, the rapid rise in tem-
perature stops automatically and your cooking continues
normally at power setting 5.
Extendable cooking zone operation
(if your hob is fitted with extendable zones, see previous
page)
1. Press the control key corresponding to the cooking
zone,
2. Set the desired heating power (from 0 to 9) using
the “+” and “-” keys,
3. Press the key to set the zone to the maximum
power setting.
To go back to the smaller zone, just press the extension
key again.
The indicator light situated beside the extendable zone is
on when the large cooking zone is in use.
Turning off a cooking zone
Toturn offacookingzone,pressthecorrespondingcontrol
key and:
• press both “+”and “-” simultaneously:thecooking
zone power drops immediately to zero and the zone is
turned off.
• or press the “-” key: the heating power drops
progressively until the zone eventually turns off.
Turning off the hob
Press the key; the appliance has been turned off.
Ifyouhave lockedthe hobcontrols(see paragraphbelow),
the same will still be locked when you turn the hob back
on. Unlock the controls in order to operate the cooking
zones.
Controls lock
When the hob is in use, you can lock the controls to avoid
anyaccidentalchangestothesettings(bychildren or when
cleaning, for example).
Just press the key, the indicator light next to the key
lights up and the controls are locked.
To change the power level setting or stop cooking, the
controls have to be unlocked: press the key, the
indicator light turns off and the controls are unlocked.
To access the setting of a cooking zone again, select the
zone by pressing the corresponding control key.
Cooking time programming
A cooking zone can be programmed to cook from 1 minu-
te to a maximum of 99 minutes. Proceed as follows:
• select the cooking zone by pressing the
corresponding control key,
• set the desired heating power using the “+” and “-
”keys,
• press the programming key ,
• set the desired cooking time using the “+” and “-”
keys,
• confirm the programming by pressing the key
again.
The countdown begins immediately.
The end of programmed cooking is signalled by a beep
(one minute long) and the cooking zone is turned off.

10
The safety devices
Acoustic signal
Anomalies such as:
• an object (such as a saucepan or a lid, etc.) placed
for more than 10 seconds on the control zone,
• boiled-over liquids or food spilled on the control
zone,
• prolonged pressure on a key,...
could cause a beep to sound and the hob to turn off.
To stop the beep from sounding, remove the cause of the
malfunction.
To use the hob, turn it back on and re-select the cooking
zone(s) you wish to use.Set the desired heating power.
Safety cut out
Your appliance is fitted with a safety cut out which
intervenes after a certain amount of time (see table)
depending on the power setting.When the safety cut out
has intervened, the power display indicates “0”.
for example: the back right cooking zone is set to 5 and
the front left zone is set to 2.The back right zone will turn
off after 4 hours of operation and the front left zone will
turn off after 6 hours of operation.
To unlock the controls, turn the hob off by pressing the
key.
Overheating
Prolonged use of the hob could cause the electronic
components to overheat.
A thermal protection device momentarily sets a reduced
power (setting 3) on the front cooking zones until the
temperature has dropped back down to a suitable level.
Power level Maximum operating
time in hours
1-2 6
3-4 5
54
6-7-8 1,5
91,5

11
Hob care
The vitroceramic glass used for the heating surface is
smooth and poreless and it is also resistant to thermal
shocks and to mechanical shocksunder normal conditions
of use. In order to preserve these properties, we
recommend you care for your hob as follows:
• for ordinary maintenance, just wipe it with a damp
sponge and dry it thoroughly using paper towels.
• If the hob is dirty, rub clean using a special cleaner
suitable for vitroceramic glass, rinse off and dry
thoroughly.
• food residue and dirt can be removed using a
special scraper. Do this as soon as possible, do not
wait for the hob to cool down in order to avoid
incrustations. For excellent results, use a special
stainlesssteel woolpadforvitroceramicglass cleaning
soaked in soapy water.
• When the hob is clean, you can apply a special
product for the care and protection of the same: this
type of product leaves an invisible film on the surface
of the hob to protect the same against any spills and
boiled-over food.It is best if you do this when the hob
is lukewarm or cold.
• Makesure youalwaysrinsethehobwithcleanwater
and dry it thoroughly: otherwise the cleaning products
could become encrusted onto the hob during
subsequent cooking.
Recommendations
• Never use abrasive or corrosive substances,
such as aerosol cleaners for grills and ovens, stain
removersorrust removers,scouringpowdersandabra-
sive sponges:eventhedelicate ones couldscratch the
hob surface irreversibly.
• We recommend you keep all items which could melt
away from the hob, such as plastic utensils, sugar
or products with a high sugar content.Should liquid
boil over onto the hob surface, remove it immediately
(while the hob is still hot) using a razor blade scraper,
in order to avoid damaging the surface.
• Use this hob exclusively for cooking. Do not
place items on the hob when the same is not in use.
Do not use the hob as a work surface (by placing lids,
saucepans or dishcloths on it, for example), nor as a
choppingboard.
• Neverleavealuminium wrappers,aluminium foiland
plastic cookware on the hob when hot or still warm.
• Do not use steam cleaners or high pressure
cleaners to clean your appliance.
Maintenance and care
Advice on using your appliance
To get the best from your hob, it is vital that you follow
a few fundamental rules during cooking and when
preparing food.
• Use pans with a flat bottom so they adhere fully to
the heating zone.
• Always use pans whose diameter covers the
cooking zone fully so that all the available heat can be
used.
• Make sure the pan base is always clean and dry, to
guarantee good contact and long life for the cooking
zones and pans alike.
• Avoid using pans used normally on gas burners.
The concentration of heat on gas burners can warp
the bottom of the pan, consequently you would never
obtain the desired result when using the pan on the
glass ceramic hob.
• Never leave a cooking zone on without a pan on it
as the maximum heat level would be reached very
quickly, which could damage the heating elements.
• The glass ceramic hob is resistant to thermal and
mechanical shocks. However, it may break due to a
shock caused by a sharp object.In this case, unplug
theapplianceimmediately andcontact an authorised
after-sales service centre to have it repaired.
Always keep your hob clean. Before proceeding with
maintenance operations, check that all the cooking
zonesare turned off andhavecooled downcompletely.
Stainless steel frame (only on some models)
Stainless steel can stain as an effect of enduring
contact with limescale in water or as an effect of highly
aggressive detergents (containing phosphorus). We
recommend you rinse and dry it thoroughly after
maintenance.It is preferableto remove any waterspills
immediately.

GB 12
"No company is better positioned to offer an after sales service on a
Hotpoint appliance than us - the manufacturer"
As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts
and labour guarantee for the first 12 months. In addition to this you also have the advantage of free
replacement parts for the first 5 years when fitted by a Hotpoint
engineer. When the 12 months parts and labour guarantee expires we offer the following after sales
service options:
Repair Service and Information Help Desk
UK:08709066066
www.hotpointservice.co.uk
Republic of Ireland: 1850 302 200
Note: Our operators will require the Model number and the Serial number of your appliance
Available 364 days a year with a fast, effective and value for money service.We have the largest white
goods repair service in the UK with over 1000 of our own fully trained engineers. All repairs include a
parts and labour guarantee for 12 months from the date of the repair.
If you require any information or have any questions about your appliance, our operators are on hand with
help and advice.
All this ensures that you will receive the best available after sales service possible.
Extended Warranties
UK: 08709 088 088
www.hotpointservice.co.uk
Republic of Ireland: 1850 502 200
Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service cover
plans to give you total peace of mind.
l Repair Protection Plan - FREE service repairs for a single Hotpoint appliance during the period
of cover.
l Kitchen Cover - FREE service repairs for all your Hotpoint appliances less than 8
years old.
Genuine Parts and AccessoriesUK: 08709 077 077
www.hotpointservice.co.uk
Republic of Ireland: [phone]
A wide range of genuine parts and accessories are available from our hotline or through our web site.
Genuine parts and accessories, extended warranties and service repairs are all
available on our web-site at:
www.hotpointservice.co.uk
After Sales Service

GB
13
Guarantee
"Satisfaction guaranteed or your money back"
We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have
purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service
or visit our web-site at www.hotpointservice.co.uk and where necessary, we will arrange for an
engineer to call. If the technical problem is not resolved under this guarantee, we will replace your
machine or, if you prefer, give you your money back.
All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as free
replacement parts for the first 5 years provided that they are fitted by a Hotpoint engineer.
Guarantee terms and conditions
Your guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to the
following provisions that your appliance:
lHas been installed and used correctly in accordance with this instruction booklet.
lHas been used solely for domestic purposes and is located on domestic premises (ie. not for
commercial or trade use).
lHas been properly connected to a suitable electrical supply voltage as stated on the appliance
ratingplate.
lHas not been subject to misuse, accident, modified or repaired by anyone other than one of our
own service engineers.
For pre purchase information on any other Hotpoint product call: 08701 50 60 70
or visit: www.hotpoint.co.uk
Recycling & Disposal Information
As part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right to
use quality recycled components to keep down customer costs and minimise material wastage.
Please dispose of packaging and old appliances carefully.
To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with the
appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged
into a mains socket, and the door cannot be locked shut.

05-2004 Part no.FP157 - 01
Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in
both the appliances and services we offer.
Repair Service and Information Desk
UK: 08709 066 066
(Open 8 to 8 Mon - Fri, 8:30 to 5:30 Sat, 10 to 4 Sun & Bank Holidays)
www.hotpointservice.co.uk
Republic of Ireland: 1850 302 200
Note: Our operators will require the following information:
Modelnumber:
Serialnumber:
Extended Warranties
UK: 08709 088 088
(Open 8 to 8 Mon - Sun)
www.theservicecentre.co.uk
Republic of Ireland: 1850 502 200
Genuine Parts and Accessories
UK: 08709 077 077
(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)
www.theservicecentre.co.uk
Republic of Ireland: [phone]
Merloni Elettrodomestici UK Ltd, Morley Way, Peterborough, PE2 9JB.
Key Contacts
After Sales Service
195.043.664.00