
Insert baskets.
Extend the lower glide.
Set the basket on the glides so that the hooks sit just inside the thin vertical poles on the sides of the basket
(see hook position on figure_3b).
Note: If a basket is not level, check to see that it is in contact with all hooks. Some hooks may need to be
adjusted by carefully bending the hooks outward or inward to accommodate.
Repeat with upper glides and remaining basket.
fig_3b
Hook position
Hook position
E
Install the frame.
Place the organizer frame in your cabinet and center it, making sure slides are parallel to the sides of
the cabinet.
Mark the location of the holes in the U-frames (A) on the cabinet floor, and then remove the frame.
Drill pilot holes in the cabinet floor at the marked locations. Return the organizer frame to the
cabinet and align holes.
Screw the organizer frame to the cabinet floor with screws (E) until screws are flush with frame.
ASSEMBLY
12/2016
2
3
C21221-1|C21521-1Page2
Customer Service
1-800-922-5524•1-314-428-5657
©2016 HOUSEHOLD ESSENTIALS, LLC
Hazelwood, MO 63042
1-800-922-5524
1-314-428-5657
www.householdessential.com
Made in China