Howdens HYH13PF User manual

300, 400 & 500 Pull Out Larder
HD516030 HYH13PF
Assembly
1
HYH13PF
425mm
= == =
1804mm
1804mm
2mm
Note: Be aware of handle screw
positions when fixing the door straps
225mm
500 Frontal300 Frontal
69mm
Important Notes:
Do not use a power driver for this product installation
18kg maximum load per basket
Ensure packaging is disposed of in a safe environmentally friendly way
We recommend the larder door handle is fitted horizontally
For five piece door constructions , care should be taken when fixing screws through into the back of the door
Integrated handle ranges require a longer door strap & a centre bracket supplied in the additional pack (see stage 4)
The Pull-Out runners will require adjusting once baskets are loaded, as weight distribution will affect the closing action
69mm
2mm
400 & 500 larder
additional foot
IMPORTANT: Ensure the cabinet is level, plumb and secured to the wall before installing
this product.
Follow the installation manual for fixing the feet to your cabinet.
Note: The 400 & 500 larder unit should have 5 feet fitted (one in a front centre position
for extra stability as shown in stage 1).
= =
1804mm
325mm
400 Frontal
69mm
2mm
*For integrated handle
ranges use a longer door
straps & centre bracket supplied
in the additional pack
2 per bracket (300 Unit)
4 per bracket (400 & 500 Unit)
Note: The two central screws in the top
bracket should not be fitted when
fitting a 5 piece door, with a
thin centre panel
Screw x8
(4.5x16mm csk)
Screw x8
(4.5x16mm csk)
Door Bracket x2
*Door
Strap x2

HD516030
Assembly
Adjustment
Loosen inner screws before adjustment making sure they are re-tightened once adjustment
is completed. Note: Further adjustment may be required once baskets are loaded. Screws
fitted in stage 7 will need to be removed before adjustment can be made.
Releasing
Door
Releasing
Runner
Door tilt
Up/Down
Left/Right Door Angle
IMPORTANT: For 5 piece door constructions and Integrated
handle doors, do not place fixing screws through the frame
and into the thin section of the door/handle section.
2
4
5
Repeat this stage
for all five baskets
Fit frame to frontal assembly aligning the bracket.
Lift the front clip carefully
to release
Push the green button
to release and pull out
3
Fit the frame to the
runners
TOP 1. 2.
CLICK
TO
LOCK
CLICK
TO
LOCK
A
1.
2.
3.
B
C D
Screw x4
(4x35mm)
=
1.
2.
3.