HOZO Design MEAZOR User manual

1
Multifunctional Laser Measure
USER INSTRUCTIONS
Access to multilingual instruction manuals
in：
English | Simplified Chinese
Traditional Chinese | Japanese | German |
Spanish | Italian | French | Arabic
-Download at hozodesign.com/meazorapp
-Scan the QR code to download the
MEAZOR APP to view

2
OVERVIEW
The MEAZOR is a portable and multifunctional
measuring device. It has an 82feet (25m) laser
distance module and a 4096 grade rolling ruler
module with high accuracy, as well as the ability
to measure straight lines, curves, and compound
shapes. It is equipped with a plotting app available
for Android and iOS, which allows data collection,
floor plan drawing and editing, document
receiving, and sharing. The standard edition of the
device has the following measuring functions.
Look out for more new features in the cloud
update package.
SAFETY INSTRUCTIONS
For the safe use of this multifunctional measure,
please read the instructions below carefully.
The device is categorized as a Class 2 laser
product. DO NOT stare directly at the laser or
shoot the laser at other people or animals, or it will
cause damage to the eyes.
This product is in accordance with strict standards
and testing regulations through its development
and manufacturing, but this does not preclude the
product from being subjected to external
environmental influences and interference.
Please DO NOT use this product in
extremely hot (>40°C) or extremely cold
(<0°C) environments.
Please DO NOT use this product in an
explosive or corrosive environment.
Please DO NOT use this product near
medical devices.
Please DO NOT use the product on a
plane.
Disposal:
This product contains a rechargeable lithium
battery, which must NOT be disposed of with

3
household waste. Please dispose of the product in
accordance with the national regulations in force
in your country/region.
Scope of Responsibility:
We will not be responsible for any damage
caused by improper use below:
Using the product without instruction;
Use of accessories from other
manufacturers without approval from us;
Carrying out modification or conversion of
the product.
POWER SUPPLY
A Type-C charging port is used. The battery has a
rated capacity of 650mAh. 5V-1A charger is
supported. The charging time is approximately
two hours.
*Note: This product does not support dual-
ended Type-C charging cables or chargers for
fast charging.
BASIC OPERATION
1Laser distance measuring module – Class
2 laser product. DO NOT stare directly at
the laser.
2Screen – Touch screen allows you to
select and use each function on the screen
by tapping, swiping left and right
and swiping up and down .
3Power/HOME Button - Long press

4
the button for 3 seconds to switch on/off the
device. Short press the button to return to
the main menu.
4Type C charging port
5Tripod Hole - The hole is mounted on the
back of the roller, and you can tighten the
tripod by turning the product's rollers
clockwise.
6The wheel module – Roll the product
across a surface and measure the length of
straight and curved lines. See the
description of the wheel scale function for
details of how to use it.
Stand - Flip the back flap. The flap is
attached to the product's frame at an angle
of 90°.
BASIC OPERATION AND
SETTINGS
Switching on/off
Long press the power button for 3 seconds
to switch on/off the device.
If the device remains inactivity for up to a minute,
it will automatically go into sleep mode. If the

5
device remains inactive for up to 30 minutes, the
device will automatically be switched off.
Selecting functions
You can swipe left and right on the main
menu to switch between functions.Tap on the
selected function icon to enter the function page.
LASER MEASURE
Middle: Tap on the number to record data
Top: Measurement Units
Bottom: Align Mode
The setting of the measurement units: set
at initialization or
In the setup page , the user can select
between imperial or metric units. When
measuring, the user can also switch
between units by tapping on the top area.
Imperial units include Yard, Feet, Inch, Inch
fraction, Feet+inch. Metric units include M,
cm, mm.
Settings of Align Mode：

6
Rear Align: measure along the bottom of the
MEAZOR's roller as a starting point
Stand Align: with the stand open, measure from
the bottom of the stand
Tripod Align: measure from the center of the
tripod hole
Front Align: measure from the top of the product.
SCALE RULER
Middle : Tap on the number to record data
Top : Measurement Units
Bottom ：Switch Scales
When the wheel is used for measurement, the
reference points at the bottom light up. The user
can select the start/endpoints to be used for
reference by selecting the position in which it is
customarily held.
The setting of the measurement units:

7
In the initial setup and settings page, the
user can choose between imperial or metric
units. The user can switch between units by
tapping on the top during
measurement.
Imperial units include Yard, Feet, Inch, Inch,
Feet+Inch (Mile unit is included in scale
mode). Metric units include meter, cm, mm
(KM unit is included in scale mode.)
Setting for scale：
Bottom : Return to scale measuring
Top ：Return to 1:1 scale
Middle ：swipe up and down to switch
between scales
POINT SCANNER (FLOOR PLAN SCANNER)
The Point Scanner is a patented function of
MEAZOR. Place MEAZOR on a tripod or flat
surface. The user can scan floor plans precisely
by following the steps as follow:
Aim laser at the corners/reference points - take
the point - turn - repeat the operation. The
scanning results can then be transferred to the
MEAZOR App for further editing. Please read
these instructions carefully to get the most
accurate scanning results.

8
Middle ：current scanning plot, tap to record
reference points
Undo
Save Data
Basic Operations：
As shown in the diagram, place the MEAZOR in
the middle of the room. Align the laser beam with
point 1 and tap on it to record the first reference
point, turn and align it with point 2, record, rotate,
and align it with points 3,4,5 and record each time.
After completing the above steps, all the reference
points of the room are captured. After tapping on
Save , the data will be sent to the
MEAZOR APP.
CURVE SCANNER

9
The Curve Scanner is a patented function of
MEAZOR. Place MEAZOR on a tripod or flat
surface. The user rotates the product to capture
the object's outline through which the laser
passes to complete an accurate scan of the
curve's outline. The user can then transfer the
scanning result to the MEAZOR App for further
editing. Please read the following instructions
carefully to obtain the most accurate scanning
results.
Middle ：Current scanning plot
Top ：Save Data
Bottom ：Undo
Basic operations：
As shown in the diagram, place the MEAZOR in
the middle of the room. Align the laser beam with
point 1 and tap on it to record the first reference
point, slowly rotating MEAZOR to point 2
2. Tap on to save and send data to
the MEAZOR APP.
Undo : restart scanning
PRO LASER

10
Step 1 - Select function
Middle ：Slide to switch between functions
Top ：Measurement Units
1. Pythagorean Measurement – Measure side
A, side B, and the angle ∠ab. The length of
the third side is automatically calculated.
2. Rectangular Area Measurement – Measure
the length A and the width B. The area is
automatically calculated.
Look out for more functions in the update
package.
Step 2 - Measure
Middle ：Measuring Dimensions
Top ：Switch between Align Modes
Bottom left < : last step
Bottom right > : next step
Middle bottom: current measurement

11
Settings of Align Mode：
Rear Align: measure along the bottom of the
MEAZOR's roller as a starting point
Stand Align: with the stand open, measure from
the bottom of the stand
Tripod Align: measure from the center of the
tripod hole
Front Align: measure from the top of the product.
Step 3 - Save and send
Middle ：The calculation result in green
Bottom ：Go back to the last step to edit the
measured data
Top ：Tap on to save and send
*Pro Laser data shown as a graphical result in the
MEAZOR App.
PROTRACTOR
Place MEAZOR on a flat surface, rotate MEAZOR
to measure the horizontal angle. While the angle
is being measured, MEAZOR’s laser module can
be used to locate the start/endpoint of the angle.
The MEAZOR Expert Protractor Accessory (sold

12
separately) can also be used for more accurate
angle measurement.
More accessories of MEAZOR are available in
MEAZOR APP or HOZODESIGN.com/meazor.
Middle ：Angular dimension

13
Top ：Back to zero
Bottom left: Laser-assisted positioning
Bottom right: Degree/Index Mode
LEVEL
Place MEAZOR on a flat surface to use the
electronic level function of MEAZOR. When the
level is close to 0° (< ± 1°), the light point turns
blue.
Horizontal axis: Tumble angle / Vertical axis: Tilt
angle
TROUBLESHOOTING
Description Solution
Unable to charge. No sign
of charging after switching
on or the charger is
plugged in and still unable
to switch on
Try a different charging
cable and charging plug.
Or please contact your
distributor.
The screen does not
display normally (splash
screen, garbled code,
broken)
Please contact your
distributor for customer
support services. Please
refer to the warranty
policy for details.
24/7è
37/6è
11/1è
11/1è

14
The product does not
switch on normally. The
vibration motor vibrates
continuously
Short circuit, water
ingress. Please leave
the product to stand for
12 hours and then try to
switch it back on. Or
contact your distributor
for customer support
services.
MEAZOR cannot be found
by smartphone Bluetooth
Please ensure that no
other devices are
connected to the
MEAZOR.
ONLY use the MEAZOR
APP to connect
MEAZOR to your
smartphone, DO NOT
connect directly through
your smartphone
Bluetooth setting.
MEAZOR Bluetooth
cannot connect to the
MEAZOR APP
Please update the
MEAZOR APP to the
latest version. Or try a
different portable device
for connection.
Laser distance
measurement malfunction,
length continues to display
0000
Please try restarting the
product and using it in
an environment without
over-bright light. Or
contact your distributor
for customer support
services.
The roller distance
measurement is faulty.
When measuring with the
roller, it is unresponsive or
does not correspond to
the actual roll length.
Do not use the function
of the roller wheel while
charging. Try restarting
the product. Or contact
your distributor for
customer support
services.
CONTACT US
HOZO DESIGN CO., Limited (HK)
www.hozodesign.com/contact

15
WARRANTY POLICY
Warranty period
HOZO Design. CO. - One-year Limited
Consumer Warranty covers your product
against manufacturing defects for one year
from the date you bought your product.
Special cases
The following cases are not covered by the
warranty policy during the warranty period and will
be repaired at extra cost.
1) Damage caused by improper use,
maintenance, or storage by the user.
2) Dismantling of parts under unauthorized
circumstances.
3) No proof of purchase.
4) The serial number does not correspond to the
product sent for repair or has been altered
5) Damage to the body caused by force majeure
6) Normal wear and tear of the parts, which need
to be replaced
7) Damage caused by abnormalities in the
temperature/humidity of use or storage
8) Damage to the battery caused by not charging
in accordance with the instructions
9) Any damage caused by not following the
instructions.
How to send it for repair
If the product needs to be repaired, please contact
the distributor and send the product accordingly,
and provide a valid device number with proof of
purchase.
Serial Number
Please refer to the diagram below for the serial
number. Products. Devices without a serial
number mean it is a test or demonstration unit and
not covered by the warranty.

16
COPYRIGHT NOTICE
The above product specifications are subject to
change without notice. All rights of interpretation
are reserved by HOZO DESIGN CO.
All trademarks, images, technical data, and
intellectual property rights are the properties of
HOZO DESIGN CO., Limited and are subject to
copyright infringement.
Laser Radiation, D o Not S tare
into B eam