HP Brio 8413 User manual

http://www.hp.com/go/brio
Getting Started
1
1
2
2Choosing a Comfortable Work Space
Unpacking the Computer & Display
Remove the computer
and the display from
their shipping boxes.
When you have
completely unpacked
the boxes, you will find
the items shown here.
DOCUMENTATION
DISPLAY
MOUSE
KEYBOARD
POWER CORD
COMPUTER
POWER CORD TELEPHONE CABLE
C
COMMUNIC OMMUNICA ATIONS OPTION ONL TIONS OPTION ONLY Y
SAFETY W
SAFETY WARNING ARNING
REGULA
REGULAT TORY ORY, W , WARR ARRANTY AND SOFTW ANTY AND SOFTWARE LICENSE INFORMA ARE LICENSE INFORMATION TION
If you are in any doubt about whether you can lift the equipment safely, do not try to move it without help.
Please read carefully the relevant sections in your HP Brio PC’s documentation for safety instructions relating to:
unpacking and setting up your display, electrical connections and/or telephone connections.
Please read carefully the relevant sections in your HP Brio PC’s documentation.
Choose a work space for your computer near a grounded electrical wall outlet.
If you have a tilt-swivel, attach it to the display as described in the display manual. Refer to your display documentation to make
sure it is firmly attached.
Position the display on your desk.
Position the computer to allow proper ventilation and access to the cables.
DISPLAY CABLE
Connecting Mouse, Display & Keyboard
3
3
4
4
Insert the display connector into the back
of the computer, as shown. You may also
have to connect the display cable to the
display, depending on your model.
Please note that all connectors are shaped
to go in one way only.
Insert the mouse and keyboard
connectors into the back of the computer,
as shown in the illustration.
Connecting Your Printer (optional)
Insert the printer connector into the
back of the computer, as shown in
the illustration.
If you have a serial printer, connect it
to the socket labeled SERIAL.
If you have a parallel printer, connect
it to the socket labeled PARALLEL.
KEYBOARD
MOUSE
DISPLAY
PARALLEL
SERIAL
dep_tatu.qxd 16-07-98 2:01 PM Page 1

5
5Connecting Your Audio Equipment (optional)
6
6Connecting to Your Telephone Socket (optional)
If you have amplified computer
speakers, plug one end of the cable
into the LINE OUT socket of your
sound card, and the other end into
the Input socket of your speakers.
If your speakers are not amplified or
if you want to use a headset, use the
SPEAKER socket of your sound card.
LINE IN (BLUE)
LINE OUT (BLACK)
MIC (RED)
Connect the telephone cable to the modem on the back of your computer, using the most appropriate configuration.
MIDI/GAME PORT
SPEAKER (GREEN)
Welcome to Your Computer (only models with HP Brio Center)
Starting up the Computer for the First Time
9
9
10
10
MMaannuuaallPPaarrttNNuummbbeerr55996677--00337766--EENNVV11
PPrriinntteeddiinnEE..UU..
PPaappeerrnnoottbblleeaacchheeddwwiitthhCChhlloorriinnee
Turn on the display first, and then
the computer. This is to ensure that
the computer can detect the display
and adjust itself to the best settings.
1. TURN ON THE DISPLAY 2. TURN ON THE COMPUTER
Once you have started up your computer, double-click on the HP Brio
shortcut on the desktop to launch the HP Brio Center.
The HP Brio Center lets you get the most out of your PC,
quickly and efficiently. Depending on your region, here are
some of the things you can do from your HP Brio Center:
register your HP Brio PC
take a guided tour of your HP Brio PC
view on-line help
communicate & share resources
perform troubleshooting
Connecting to a LAN (optional)
7
7
8
8Connecting the Power Cords
CChheecckktthhaatttthheevvoollttaaggeeooffyyoouurrccoommppuutteerriiss
sseettttootthheeccoorrrreeccttvvaalluueeffoorrtthheeccoouunnttrryytthhaatt
yyoouuaarreeiinn..
The voltage is displayed on the back of the
computer, above the computer power
socket.
Connect the power cords to the computer
and display as shown in the illustration.
Plug both cords into grounded electrical
outlets.
Connect the LAN cable to the back of your
computer. The exact position of the LAN
card may differ from the one shown.
Connect the other end of the LAN cable to
your LAN.
TO LAN
VOLTAGE SWITCH
dep_tatu.qxd 16-07-98 2:01 PM Page 2