HP Retail Mobile POS Case User manual

HP Retail Mobile
POS Case
Quick Start Guide
© Copyright 2011, 2012 Hewlett-Packard Development Company,
L.P. Printed in
Second Edition: March 2012
676673-002
Before You Begin
Before assembling the HP Retail Mobile POS Case, consult the
readme documentation included with the MSR and barcode
scanner drivers. Drivers may be included on a CD that came
with the case or they can be downloaded from www.hp.com.
1. Go to www.hp.com.
2. Click the SUPPORT & DRIVERS link.
3. Click the Drivers & Software link.
4. In the SEARCH box, enter HP Slate 2 Tablet PC and
click the SEARCH button.
5. Follow the on-screen instructions.
Before assembling the HP Retail Mobile POS Case be sure to
power off the computer.
*676673-002*
Installing the Case
12
45
3
Removing the Case
123

Using the Scanner
Press the button on the underside of the case to scan.
Online Technical Support
For the online access to technical support information, self-
solve tools, online assistance, community forums or IT
experts, broad multivendor knowledge base, monitoring
and diagnostic tools, go to
http://www.hp.com/support.
Localized Versions of This Document
Localized versions of this document are available at http://
www.hp.com/support for the following languages:
•French
•Japanese
•Korean
Federal Communications Commission
Notice
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
the receiver.
•Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
•Consult the dealer or an experienced radio or
television technician for help.
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly
approved by Hewlett-Packard Company may void the user's
authority to operate the equipment.
Cables
Connections to this device must be made with shielded
cables with metallic RFI/EMI connector hoods in order to
maintain compliance with FCC Rules and Regulations.
Declaration of Conformity for Products
Marked with the FCC Logo (United
States Only)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
For questions regarding the product, contact:
Hewlett Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call 1-800-HP-INVENT (1-800 474-6836)
For questions regarding this FCC declaration, contact:
Hewlett Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call [phone]
To identify this product, refer to the Part, Series, or Model
number found on the product.
Canadian Notice
This Class B digital apparatus complies with Canadian
ICES-003.
Avis Canadien
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Korean Notice
Japanese Notice