Network Controller
NOTE:
Supports one of the following FlexibleLOMs and iLO Management.
One (1) HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM
NOTE:
Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and
autosensing 10Gb/1Gb Ethernet.
NOTE:
Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE:
FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module. Fibre Channel
over Ethernet (FCoE) is supported with the HP 10GbE Pass-Thru Module, HP 6120XG Blade Switch with the
CEE license installed, HP Cisco B22HP Fabric Extender and HP Cisco B22HP Fabric Extender with 16 FET for
BladeSystem c-Class. Learn more at
www.hp.com/go/virtualconnect
.
One (1) HP Flex-10 10Gb 2-port 530FLB FlexibleLOM
One (1) HP Ethernet 10Gb 2-port 560FLB FlexibleLOM
NOTE:
FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HP iLO 4 On System Management Chipset
One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps.
Expansion Slots
Two (2) I/O expansion mezzanine slots:
x8 PCIe 2.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect
module bay 3 and the other to bay 4.
x16 PCIe 2.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE:
This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards,
one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port cards, one
port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8.
Mezzanine card options include:
Dual-port 10Gb FlexFabric,10Gb Flex-10, 10GbE options, and quad-port 1Gb Ethernet server
adapter mezzanine options for additional network ports
Dual-port 8Gb Fibre Channel HBA for SAN connectivity
QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity
I/O accelerator mezzanine options for high transaction rate local storage
Smart Array SAS RAID controller mezzanine options for external direct attach and shared SAS
storage
QuickSpecs
HP ProLiant BL465c Generation8 (Gen8) Server Blade
Standard Features
DA - 14325 North America — Version 16 — December 13, 2013
Page 4
