HP Rx2620-2 - Integrity - 0 MB RAM User manual

HP ProLiant Server Management Packs for Microsoft®
System Center Operations Manager 2007
User Guide
Part Number 449158-003
May 2009 (Third Edition)

© Copyright 2007, 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP
shall not be liable for technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S.
Government under vendor’s standard commercial license.
Microsoft, Windows, Windows Server, and Windows NT are U.S. registered trademarks of Microsoft Corporation.
Intended audience
HP assumes that this level of expertise is available to customers using the HP ProLiant Server Management Packs for Microsoft® System Center
Operations Manager 2007 User Guide. HP recommends reviewing your Microsoft® product documentation for assistance in understanding this
guide.

Contents
Overview..................................................................................................................................... 5
About this guide........................................................................................................................................ 5
Introduction .............................................................................................................................................. 5
Features................................................................................................................................................... 5
Benefits.................................................................................................................................................... 6
Operations Manager 2007 platform support ................................................................................................ 6
Product architecture................................................................................................................................... 7
HP ProLiant Server Management Packs elements............................................................................................ 8
WMI management and planning................................................................................................................. 9
Installation ................................................................................................................................. 10
Installation overview ................................................................................................................................ 10
Preinstallation checklist............................................................................................................................. 11
Installing the HP ProLiant Server Management Packs for Operations Manager 2007 (x86 or x64 editions)......... 12
After installing the HP ProLiant Server Management Packs for Operations Manager 2007 ................................ 18
Uninstalling the HP ProLiant Server Management Packs for Operations Manager 2007.................................... 19
Overriding HP ProLiant Server Management setting for SNMP and WMI management preference..................... 23
Configuring a single server............................................................................................................. 23
Configuring all servers ................................................................................................................... 25
Using the software ...................................................................................................................... 28
Using the HP ProLiant Server Management Packs for Operations Manager 2007 ............................................ 28
Classes .................................................................................................................................................. 28
HP Servers Core Library classes....................................................................................................... 30
HP ProLiant Servers Base classes ..................................................................................................... 32
HP ProLiant Servers SNMP classes ................................................................................................... 35
HP ProLiant Servers WMI classes..................................................................................................... 36
Views .................................................................................................................................................... 37
Active Alerts view.......................................................................................................................... 37
Computers view ............................................................................................................................ 40
Group State view .......................................................................................................................... 41
Health Collection State view ........................................................................................................... 42
HP Management Servers view......................................................................................................... 42
Server Diagram view ..................................................................................................................... 43
Server State view........................................................................................................................... 45
Task Status view............................................................................................................................ 53
WMI view .................................................................................................................................... 53
Discovering HP servers............................................................................................................................. 53
HP core management pack discovery rule......................................................................................... 53
HP ProLiant base management pack discovery rules........................................................................... 54
HP ProLiant SNMP management pack discovery rules ........................................................................ 56
HP ProLiant WMI management pack discovery rules .......................................................................... 57
HP ProLiant servers discoveries........................................................................................................ 57
Event processing rules.............................................................................................................................. 57
Tasks for HP ProLiant servers..................................................................................................................... 60
HP Custom Data Manager.............................................................................................................. 61
HP System Management Homepage task.......................................................................................... 66
Contents 3

HP Systems Insight Manager task..................................................................................................... 68
Custom HP Systems Insight Manager task ......................................................................................... 68
Remote Desktop and Computer Management tasks ............................................................................ 73
HP ProLiant Integrated Management Log task .................................................................................... 73
HP Integrated Lights-Out task........................................................................................................... 76
HP ProLiant Servers WMI management pack tasks ............................................................................. 77
Monitors ................................................................................................................................................ 77
Overriding individual monitors........................................................................................................ 85
Security settings for HP tasks..................................................................................................................... 91
Event rules for HP ProLiant servers (SNMP)..................................................................................... 93
ProLiant base hardware events.................................................................................................................. 93
ProLiant environmental hardware events..................................................................................................... 94
ProLiant remote management processor events............................................................................................ 95
ProLiant cluster hardware events................................................................................................................ 95
ProLiant network interface events............................................................................................................... 95
ProLiant server storage events ................................................................................................................... 96
Event rules for HP ProLiant servers (WMI).......................................................................................99
ProLiant Memory events ........................................................................................................................... 99
ProLiant Processor events.......................................................................................................................... 99
ProLiant Sensor events.............................................................................................................................. 99
ProLiant System events ............................................................................................................................. 99
ProLiant Ethernet events.......................................................................................................................... 100
ProLiant Smart Array events .................................................................................................................... 100
ProLiant SAS events ............................................................................................................................... 101
ProLiant SCSI events .............................................................................................................................. 101
ProLiant Fibre Channel events ................................................................................................................. 101
Technical support...................................................................................................................... 103
Additional references............................................................................................................................. 103
Before contacting HP support.................................................................................................................. 103
Technical support contact information for the free downloads of HP ProLiant Server Management Packs for
Operations Manager 2007.................................................................................................................... 104
Technical support and update service for the HP Insight Control suite for Microsoft System Center.................... 104
HP contact information........................................................................................................................... 105
Acronyms and abbreviations...................................................................................................... 106
Index....................................................................................................................................... 108
Contents 4

Overview
About this guide
This guide is designed for system administrators who use the HP ProLiant Server Management Packs for
Microsoft® Systems Center Operations Manager 2007 (Operations Manager), Insight Management
Agents, Insight Management WBEM Providers and other HP applications and tools to manage the
operations of HP ProLiant servers within an Operations Manager 2007 environment.
You should be familiar with the configuration and operation of Microsoft® Windows®, Microsoft®
Systems Center Operations Manager 2007, HP Insight Management WBEM Providers and the HP Insight
Management Agents. Because of the potential risk of data loss, only individuals who are experienced
with using this software should implement the procedures described in this guide.
Introduction
HP delivers management packs that complement and extend Operations Manager 2007, integrating alert
processing, state monitoring, and hardware resource lifecycle management for HP ProLiant servers.
Designed specifically for Operations Manager 2007, the HP ProLiant Server Management Packs provide
predefined discoveries, views, monitors, event processing rules, and tasks which enable administrators to
proactively streamline IT operations and ensure increased systems availability by monitoring Microsoft®
Windows® environments and HP ProLiant server hardware platforms through a common Operations
Manager console.
The HP ProLiant Server Management Packs for Operations Manager 2007 automatically discover and
group HP ProLiant servers by hardware platform type. Default discoveries and monitors highlight the state
of HP hardware and management software components and present a consolidated view of system status.
The HP ProLiant Server Management Packs support two sources of instrumentation:
•Predefined event processing rules build on the functionality of the HP Insight Management Agents to
display Windows® Event Log entries for HP ProLiant server hardware as alerts in the Operations
Manager 2007 Console, including real-time and prefailure event definitions.
•Predefined event processing rules build on the functionality of the HP Insight Management WBEM
Providers to display Windows® Event Log entries for HP ProLiant server hardware as alerts in the
Operations Manager 2007 Console, including real-time and prefailure event definitions.
For advanced hardware lifecycle management and remote administration of HP ProLiant servers, the HP
ProLiant Server Management Packs for Operations Manager include tasks that launch HP Systems Insight
Manager for group systems administration, the HP System Management Homepage for single system
health and configuration monitoring, and advanced remote server administration through the HP
Integrated Lights-Out Management Processor when installed.
Features
The HP ProLiant Server Management Packs for Operations Manager 2007 support the following features:
Overview 5

•Integration with Operations Manager 2007 (HP ProLiant Server Management Packs with Operations
Manager 2007)
•Capability for User Defined Custom Data
•Unique Icons for Operations Manager Console Diagram View
•Streamlined procedure for HP ProLiant Server Management Packs for Operations Manager
installation
•Improved management of events by eliminating multiple alerts in Rules
•that imports management pack data into the Operations Manager 2007
•ponents sourced from
•rts
ole sourced from HP Insight Management Agents or HP Insight
•n of
t Management Agents or the installed version of the HP Insight Management
•ge and
•ent, and advanced lifecycle administration of blade
ers and virtual systems through HP SIM
Bene
and HP hardware resources using
Ope
agement Packs for Operations Manager 2007 are fully qualified to install
ons Manager 2007. For more details, see the HP Server Configuration for
System Center Integrations.
Fully scripted installation
database automatically
•Automatic discovery and grouping of HP ProLiant servers by server family and platform type
State monitoring for HP hardware subsystems and management software com
HP Insight Management Agents or HP Insight Management WBEM Providers
Predefined rules to process and display Windows® Event Log entries for HP server hardware ale
in the Operations Manager Cons
Management WBEM Providers.
Policies to present consolidated views of key HP server attributes for rapid system analysis, which
include CPU type, total memory, available hard drive storage, firmware revisions, and the versio
installed HP Insigh
WBEM Providers
•HP ProLiant servers represented in the Diagram View
Console Tasks to launch HP System Insight Manager, the HP System Management Homepa
HP Integrated Lights-Out Management Processors from the Operations Manager Console
Access to HP BladeSystem and other HP ProLiant Essentials value-added software for hardware
performance management, vulnerability assessm
serv
fits
The HP ProLiant Server Management Packs for Operations Manager 2007 provide the following benefits:
•Hardware resource management for HP ProLiant servers with augmented Operations Manager 2007
•Simplified and proactive monitoring of the Microsoft® Windows®
a common Operations Manager 2007 console
•Streamlined IT administration and increased systems availability
rations Manager 2007 platform support
The HP ProLiant Server Man
and operate with Operati
Overview 6

CAUTION: HP strongly discourages the use of the HP Management Packs (IMP) for MOM
2000 or MOM 2005 Management Packs in an Operations Manager 2007 environment. The
new HP Server Management Packs for ProLiant servers take advantage of the redesigned
architecture and new features provided with Operations Manager 2007. Installing the HP
Management Packs for MOM 2000 or MOM 2005 Management Packs in an Operations
Manager 2007 environment might lead to duplicate event entries and groups.
Product architecture
The HP ProLiant Server Management Packs for Operations Manager 2007 integration is designed to
perform the following major functions:
•Automatically identify, group, and display HP ProLiant servers within the Operations Manager 2007
Console
•Populate Operations Manager with server attributes and configuration data for HP ProLiant
hardware and software components
•Monitor and display the state of HP ProLiant server hardware and the associated management
services
•Proactively identify, translate, and display HP ProLiant hardware events written to the Windows®
Event Log as Operations Manager alerts or the installed version of the HP Insight Management
Agents or HP Insight Management WBEM Providers
•Provide browser-based links to HP management tools for hardware resource management and
advanced remote administration from within Operations Manager 2007
The following elements of the HP ProLiant Server Management Packs are copied to the Operations
Manager database:
Classes and Attribu•tes
s
rs
n of
agement packs then run a detailed discovery process that enables
er. The
performs management pack operation on the target server remotely which causes higher network traffic
•Discoverie
•Monito
•Rules
•Tasks
•Views
HP ProLiant Server Management Packs is a set of unrelated management packs. After the installatio
HP ProLiant Server Management Packs, the Operations Manager transfers the primary HP ProLiant
management packs to each computer system under the Operations Manager Agent. HP ProLiant
Management Packs perform an initial discovery to verify the system is supported by a server with the HP
management software. If the discovery succeeds, the appropriate additional management packs are
transferred to the HP servers. These man
state monitoring and event processing.
After the server is properly discovered, HP ProLiant server information can be seen on the Operations
Manager console. HP ProLiant server grouping is performed on the Operations Manager Serv
discovered inventory data and monitored state are reflected on the state and diagram views.
This process does not take place for "agentless" servers under Operations Manager. Agentless servers
are monitored by an Operation Management Agent run on Operations Manager Server. This agent
Overview 7

and process power consumption on Operation Manager Server. HP recommends keeping the number of
agentless servers in your Operations Manager environment to a minimum.
HP ProLiant Server Management Packs elements
The following identifies some of the major elements of the HP ProLiant Server Management Packs for
Operations Manager 2007 and the underlying elements used to collect data and process hardware
events and state changes. The management packs support two sources of instrumentation: HP Insight
Management Agents and HP Insight Management WBEM Providers:
For HP Insight Management Agents:
•The HP ProLiant server discovery rules and scripts use HP Insight Management Agents, system BIOS
data, and information from WMI to identify HP ProLiant servers and collate individual system
configuration attributes.
•HP ProLiant server state monitoring rules use data from HP Insight Management Agents MIB files to
monitor the condition of HP ProLiant server hardware and to populate the State views in the
Operations Manager 2007 Console. HP ProLiant server state monitoring rules also monitor the
availability of key HP ProLiant management software and services, such as HP Insight Management
Agents.
•The HP ProLiant server event processing rules rely on HP Insight Management Agents and data
written to the Windows® Event Log to identify and process HP ProLiant hardware events.
When an HP Insight Management Agent generates an event, a corresponding entry is written to the
Windows® Event log, which is the primary event data source used by Operations Manager 2007. If
the HP event in the Windows® Event Log has an associated event processing rule defined by an HP
ProLiant Server Management Pack, an Operations Manager alert is generated and written to the
appropriate view in the Operations Manager Console.
HP alerts in Operations Manager include clear event details and knowledge-based data designed to
enable rapid analysis of real-time and prefailure conditions. Certain hardware events reported to the
Windows® Event Log can also generate additional events that indicate a change in hardware state.
For HP Insight Management WBEM Providers:
•The HP ProLiant server discovery rules and scripts use HP Insight Management WBEM Providers,
system BIOS data, and information from WMI to identify HP ProLiant servers and collate individual
system configuration attributes.
•HP ProLiant server state monitoring rules use data from HP Insight Management WBEM Providers to
monitor the condition of HP ProLiant server hardware and to populate the State views in the
Operations Manager 2007 Console. HP ProLiant server state monitoring rules also monitor the
availability of key HP ProLiant management software and services, such as HP Insight Management
WBEM Providers.
The HP ProLiant server event processing rules rely on HP Insight Management WBEM Providers•and
•
nager alert is generated and
written to the appropriate view in the Operations Manager Console.
data written to the Windows® Event Log to identify and process HP ProLiant hardware events.
When an HP Insight Management WBEM Provider generates an event, a corresponding entry is
written to the Windows® Event log, which is the primary event data source used by Operations
Manager 2007. If the HP event in the Windows® Event Log has an associated event processing rule
defined by HP ProLiant Server Management Packs, an Operations Ma
Overview 8

•HP alerts in Operations Manager include clear event details and knowledge-based data designed to
enable rapid analysis of real-time and prefailure conditions. Certain hardware events reported to the
Windows® Event Log can also generate additional events that indicate a change in hardware state.
See "Using the software (on page 28)" for information on the components provided with the HP ProLiant
Server Management Packs for Operations Manager 2007.
WMI management and planning
HP Insight Management WBEM Providers enables WMI-based server management to ProLiant servers.
The providers offer server management instrumentation through WMI protocol while HP Insight
Management Agents provide it through SNMP protocol. HP continues to improve the providers to match
the same and more capability than the agents. For more information, see the HP Insight Management
WBEM Provider (2.1 or higher) User Guide.
HP ProLiant Server WMI Management Pack is designed to bring WMI management capability easily and
seamlessly. The user imports the WMI management pack and installs the providers, and then WMI
management starts automatically without any customization. HP does not recommend installing both the
providers and the agents on a server because it causes instrumentation redundancy and the use of system
resource. If the user selects to install both the providers and the agents, HP ProLiant Server management
pack selects the agents as default. For more information, see Overriding HP ProLiant server management
setting for WMI preference ("Overriding HP ProLiant Server Management setting for SNMP and WMI
management preference" on page 23).
The following are key features of the HP ProLiant Server WMI Management Pack:
•The View in Operation Manager Console is shared with base management pack. No new view is
added.
•Class data structure is based on the original server management pack, and operation and process is
the same with released management pack.
•WMI management can be force-enabled by using the override setting if a server has both the HP
Insight Management WBEM Providers and the HP Insight Management Agents installed but want to
use WMI management.
•HP ProLiant Server WMI Management Pack is part of the current HP ProLiant Server Management
Pack. The installer is updated to add import selection menu to enable WMI Management.
Overview 9

Installation
Installation overview
The HP ProLiant Server Management Packs for Microsoft® Systems Center Operations Manager 2007 is
part of the HP Insight Control suite for Microsoft® System Center product. A free download is available
for customers who do not have the HP Insight Control suite. The HP Insight Control suite, which provides
compressive integrated features for Microsoft® Systems Center product environments such as Operations
Manager 2007, Configuration Manager 2007, and Virtual Machine Manager 2008, is integrated with
advanced plug-in products for HP Systems Insight Manager products.
The HP Insight Control suite DVD provides a guided installer (Autorun.exe) to select the HP ProLiant Server
Management Packs for Operations Manager 2007. Run the Autorun.exe program on the DVD, and then
follow the screen guide. The appropriate kit, such as Windows Server® 2008 X64 and X86 editions, is
selected on the installation environment.
NOTE: In the file names, n_n represents the version number (for example, use 1_2 for version
1.2).
To install the HP ProLiant Server Management Packs for Operations Manager 2007, perform the
following procedure:
NOTE: Steps 1 and 2 explain the free download operation. These steps are not needed for HP
Insight Control suite installation.
1. Download and unzip the hpProLiantServerMPKitsn_n.exe zip file to install from the HP website
(http://www.hp.com/servers/integration).
2. Select the appropriate management pack to install.
HP ProLiant Server Management Packs for Operations Manager 2007 are delivered with
Windows® Installation Kits.
NOTE: The appropriate versions of HP Insight Management Agents or HP Insight Management
WBEM Providers are installed and running on all managed servers. For further information,
see the HP Insight Management Agents Configuration Guide or HP Insight Management
WEBM Providers Configuration Guide.
The following table shows the kits available for selection.
Kit name File name Description
HP ProLiant Server
Management Pack for
Operations Manager 2007
(x86)
hpProLiantMP0n_n(x86).exe Used to install HP ProLiant Server management
capability where Operations Manager 2007
is operating in an x86 environment
This kit supports both x86 and x64 ProLiant
Server managed nodes.
Installation 10

Kit name File name Description
HP ProLiant Server
Management Pack for
Operations Manager 2007
(x64)
hpProLiantMP0n_n(x64).exe Used to install HP ProLiant Server management
capability where Operations Manager 2007
is operating in an x64 environment
This kit supports both x86 and x64 ProLiant
Server managed nodes.
3. Install the HP ProLiant Server Management Packs for Operations Manager 2007 into the Operations
Manager environment.
The kits support a custom setup option. Select any or all of the following to be installed:
oRelease Notes and Documents (automatically installed)
oConsole Task Tools
oManagement Packs
The custom setup option is used to install HP console task tools to each remote Operations Manager
Console.
NOTE: There are dependencies between management packs and console task tools, therefore
both components must be installed to ensure full functionality. The management packs must
always be installed on the Operations Manager 2007 server. The console task tools can be
installed on the Operations Manager 2007 server and on a remote operator console system.
The custom setup option is used to select components to install.
4. The installer imports the management packs to the Operations Manager 2007.
5. Complete the post-installation procedures to discover and display HP servers in Operations Manager
console.
Preinstallation checklist
Before installation, verify the following required configuration environments:
For WMI-based notifications:
•HP Insight Management WBEM Providers (2.1 or higher) has been installed on at least one of
managed ProLiant server nodes. The server must meet all criteria that HP Insight Management WBEM
Providers (2.1 or higher) program supports.
•HP Insight Management WBEM Providers (2.1 or higher) is functioning on each WBEM Provider-
installed ProLiant server. HP System Management Homepage is accessible to display system
information properly.
For detailed installation instructions for HP Insight Management WBEM Providers (2.1 or higher), see the
HP Insight Management WBEM Providers (2.1 or higher) User Guide.
For SNMP-based notifications:
•HP Insight Management Agents has been installed on at least one of managed ProLiant server
nodes. The server must meet all criteria that HP Insight Management Agents program supports.
•For detailed installation instructions for HP Insight Management Agents, HP Insight Management
Agents User Guide.
Installation 11

Installing the HP ProLiant Server Management Packs
for Operations Manager 2007 (x86 or x64
editions)
NOTE: In the file names, n_n represents the version number (for example, use 1_2 for version
1.2).
1. If the Operations Manager console is running, close it.
2. Install and then execute either the hpProLiantMP0n_n(x86).exe file or the
hpProLiantMP0n_n(x64).exe file on a system hosting the Operations Manager 2007 Management
Server or a system running remote Operations Manager console.
3. Click Next.
Installation 12

4. Select I accept the terms in the license agreement, and click Next.
5. To change the destination folder, click Change. If no folder change is required click Next, and then
go step 7.
Installation 13

6. Select the destination folder by using the folder navigation button to browse to the folder location or
by entering the folder name in the textbox. Click OK.
7. Select the setup type from the following options:
oComplete—Select this setup type to install all necessary features onto the Operations Manager
2007 environment (continue to step 8).
oCustom—Select this setup type to select the features to install the Operations Manager 2007 in a
console-only environment (Remote Operations Manager console).
The Custom Data Manager must be installed on all remote consoles.
Installation 14

Click Next.
8. Select the required features to install from the menu. Click Next.
Installation 15

9. Select the management packs to be imported into Operations Manager.
10. Click Install. The installer imports the management packs.
Installation 16

11. The installation progress screen appears.
12. Click Finish.
Installation 17

After installing the HP ProLiant Server Management
Packs for Operations Manager 2007
The installation updates the system with components in the table below. By default, all files are installed in
the "%Program Files%\HP Server Management Packs for Operations Manager 2007" directory. If you
selected a different destination folder during the installation, these files are installed in the selected folder.
NOTE: In the file names, n_n represents the version number (for example, use 1_2 for version
1.2).
Name Type Component Description
"HPServerManagementPacksForOpsMgr2007D
ir" Environment variable Default Store the destination folder
Management Packs
\HewlettPackard.Servers.Library.mp
Management
Pack
Management
Packs
HP Servers Core
Library
Management Packs\ProLiant
HewlettPackard.Servers.ProLiant.mp
Management
Pack
Management
Packs
HP ProLiant Servers
Base
Management Packs\ProLiant
\HP.Servers.ProLiant.SNMP.mp
Management
Pack
Management
Packs
HP ProLiant Servers
SNMP Management
Pack
Management Packs\ProLiant
\HP.Servers.ProLiant.WMI.mp
Management
Pack Management Packs HP ProLiant Servers WMI Management
Pack
Release Notes and Documents
\HPManagementPacksn_n
TroubleshootingAssistant.chm
Document Release Notes
and Documents Troubleshooting Assistant document
Release Notes and Documents
\HPManagementPacksn_nUserGuide.chm
Document Release Notes
and Documents
User Guide - General
Release Notes and Documents\Proliant\
HPProliantServerManagementPacksUserGuide.c
hm
Document Release Notes
and Documents
HP ProLiant Server
Management Pack User
Guide
Release Notes and Documents\Proliant\
HPProliantServerManagementPacksTroubleshoot
ingAssistant.chm
Document Release Notes
and Documents HP ProLiant Server Management Pack
Trouble Shooting
Assistant
Release Notes and Documents
\ProLiant\LicenseForProLiantMPs.rtf
Document Release Notes
and Documents
License document
Release Notes and Documents
\ProLiant
\ReleaseNotesForProLiantMPs.rtf
Document Release Notes
and Documents Release Notes
Tools
\hpCDM.exe
Tool Console Task
Tools HP Custom Data Manager
ProLiantImportMPs.log Log Management
Packs
Logging text data of
imported result
Installation 18

When installation is complete, the installer imports the management packs to the Operations Manager
2007 server. The results can be viewed using the Management Packs view in the Operations Manager
2007 console. Import logging data is also available in the ProLiantImportMPs.log file.
The HP ProLiant Server Management Pack kit imports four management packs into the Operations
Manager 2007 server:
•Hewlett-Packard Servers Core Library—This defines the basic HP Server Class structure to support
ProLiant Servers Management.
•Hewlett-Packard ProLiant Servers Base—This defines the HP ProLiant Server Class structure to process
primary monitoring to ProLiant Servers.
•Hewlett-Packard ProLiant Servers SNMP Management Pack—This defines the HP Insight
Management Agents-based management for states and events.
•Hewlett-Packard ProLiant Servers WMI Management Pack— This defines the HP Insight Management
Providers-based management for states and events.
These management packs are deployed automatically, and you can view state and event information after
the installation.
This installation also adds entries in the programs menu on the Windows® Start menu.
Uninstalling the HP ProLiant Server Management
Packs for Operations Manager 2007
NOTE: Uninstalling the kits will not delete the imported Management Packs from the
Operations Manager 2007 servers.
Installation 19

Before attempting to remove the kits from the Add/Remove Programs menu, you must manually delete all
dependent management pack data from the Operations Manager 2007 console and the HP ProLiant
management packs.
You can check current dependency in the Administration screen. For example, right-click the HP ProLiant
Servers SNMP Management Pack you want to check, and select Properties. Select the Dependencies tab.
If the Management Pack that depends on this Management Pack list does not display any dependency,
then the management pack can be deleted. If there are dependencies present, you must verify that it is
appropriate to delete them.
After the HP ProLiant Server Management Packs are deleted from the Operations Manager 2007 server,
complete the following to uninstall all kit contents:
1. Locate the HP ProLiant Server Management Packs for Operations Manager 2007 in the Windows®
Add/Remove programs menu. Click Change to begin the removal process.
2. Click Next.
Installation 20