Huananzhi X79 DUAL-4D User manual

1 x M.2 PCI-E协议接口
1 x 音频接口

M.2接口
图1-2 整体后置I/O面板展示

8.8.
8.8.
8.8.
8.8.

8.8.
3.
4.
5.
1. 从螺丝底座上移除螺丝
2.
移除螺丝底座
拧紧旋入长度M.2模块到M.2
接口距离孔的螺丝底座
将您的M.2模块以30度角插
入到M.2接口
将螺丝放在您M.2模块的
后缘缺口上并拧紧到螺丝
底座
5
330
°
4
图2 -8 M.2接口安装
1
2

8.8.

以便电脑正常工作或执行特定的功能。CMOS SETUP会
将各项数据储存在主板上内见的CMOS SRAM中。当电源关
闭时，由主板上的电池继续为CMOS SRAM供电。电源开启
后，当BIOS开始进行POST(Power On Self Test开机自检)时
，按下“Delete”键便可--AMI BIOS的CMOS SETUP主画面
中。主板热启动键“F7”。

DIRECTORY
Packing
Brief Introduction
Motherboard Diagram
Installation and Settings
Installation of Drivers
BIOS Settings
Rear I/O panel
........................................................
........................................................................
..........................................................
................................................
...............................................................
..............................................
................................................................
...................................................
2
3
4
5
6
7
11
13
Safety Precautions
SAFETY PRECAUTIONS
Products could probably be damaged due to electrostatic
discharge(ESD). Please follow these steps below for a
successful computer assembly.
Make sure all parts are firmly connected; otherwise, it might
lead to the failure of recognizing components or starting the
computer.
In order to prevent products from being damaged by ESD,
please make sure to discharge your body static by touching
other metal objects before taking the motherboard out of
box.
Hold the border of motherboard when taking it out. Do not
touch the sensitive parts of motherboard.
Please put the motherboard in an anti-static container or on
anti-static pad if not needed.
Before turning on the computer, make sure all parts inside
the case are firmly connected without any loose screws or
metal components.
Do not start the computer before installation finished,
otherwise it might result in permanent damage to the
computer parts or even injury to the user.
If you need any assistance in the process of installation,
please contact our after-sales customer service or reach us on
HUANANZHI official WeChat for professional technical
support.
Prior to installation or disassembly, please switch off the
power and unplug the computer.
SAFETY PRECAUTIONS 02
01 DIRECTORY

Before plugging the power supply, please make sure the
socket provides the corresponding voltage.
Liquid penetrated into the computer.
Motherboard is exposed to moisture.
Motherboard does not work even if you follow the instruc-
tions on user manual.
Motherboard fell off to the ground and got damaged.
Motherboard has clear signs of damage.
PACKING
Please confirm that the motherboard is properly packaged
upon purchase of the product. If there is any damage to
packaging or lack of accessories, contact us as soon as
possible.
2.2*SATA data cable
3.1*Driver disk
4.1*I/O shield back plat
6.1*Warranty Card
In the event of any of the following conditions, have the
board checked by a service technician:
In any of the following situations, please keep the mother-
board and power cable in a safe place. Do not put anything
onto the power cable.
Keep the motherboard away from moisture.
Keep the user manual for future reference.
1.1*HUANANZHI X79 Dual-8D motherboard
5.1* User manual
03 Packing
BRIEF INTRODUCTION
Features
CPUs supported: Standard LGA2011 socket
RAM supported: Supporting four channels of DDR3 1866/1600
/1333/1066MHZ, with standard and ECC memory
I/O attributes：
2*SATA3.0(Max data transmission rate of 6GB/s)
4*SATA2.0(Max data transmission rate of 3GB/s)
6*USB2.0 ports
2*USB3.0 ports
1*P/S Keyboard
1*M.2 PCI-E protocol interface
2*RJ45 Gigabit Ethernet ports
1*Audio interface
HD AUDIO sound effect：
Supporting 7.1 soundtrack HI-FI audio input/output（ALC887）
Audio output: this is the front speaker output port that stereo
speakers or earphones can be plugged into
Onboard NIC: Motherboard has internal RTL8111E network
interface card
Providing audio input/microphone/front speaker/rear speaker
and side speaker output port
Expansion slots：2*PCI Express x16 Accelerated Graphics Port
2*PCI Express x1 Accelerated Graphics Port
Brief Introduction 04

1-2 Overall Rear I/O Panel Display
MOTHER BOARD IMAGE
Notice:
This motherboard is HUANANZHI X79 dual-4d Motherboard,which needs to be
connected to two 8P CPU independent power supply interfaces
CPU-PWRI
CPU-PWRI
PS/2
USB3.0
USB2.0
CPU Fan Interface
CPU Fan Interface
Gigabit Ethernet
Audio Port
PCI-E X 1 Interface
PCI-E X 1 Interface
PCI-E X 16 Interface
PCI-E X 16 Interface
M.2 SSD Interface
JAUDI
JCOM INTERFACE
JUSB3.0
JUSB2.0
SATA2.0
SATA3.0
EATX-PWRI
DDR3*4 Slot
1-1 X79 Dual-4D motherboard illustration
05 Motherboard Diagram
Audio Port
Network Not Connected
Status Description
Turn Off
Yellow Network Connected
Flicker Network In Use
Speed Signal
Status Description
Turn Off Transmission rate 10 Mbps
Green Transmission rate 100 Mbps
Orange Transmission rate 1 Gbps
Connection/Work Light
1-3 LAN Port Status Table
Audio Input
Audio Port
Audio output/Front speaker
output
Microphone input
1-4 Audio Port Configuration
Rear I/O Panel 06
Rear I/O Panel