Huawei MATE 9 User manual

Quick Start Guide
Guide de démarrage rapide
Schnellstartanleitung
Guida di avvio rapido
Guía de inicio rápido
Guia de Início Rápido
Snelstartgids

i
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Deutsch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Contents

ii

1
For more information
Open HiCare to read the user guide and service
information or get help from the online forum.
Go to http://consumer.huawei.com/en/ to download the
user guide for your device and read the FAQ, privacy
policy, and other information.
Go to
Settings > About phone > Legal information to
read the legal information.
Please visit
http://consumer.huawei.com/en/support/hotline/ for
up-to-date contact information for your country or
region.
English

2
Your phone at a glance
Before you start, let's take a look at your new phone.
Press and hold the power button to turn your phone on
or off.
To forcibly restart your phone, press and hold the
power button until your phone vibrates.
Status indicator
Earpiece
Front camera
Infrared sensor
Volume button
Power button
USB-C port
Headset connector
Light sensor
Dual-lens
camera
Laser sensor
Dual-tone
flash
fingerprint
scanner
Microphone
Microphone

3
Getting started
Follow the instructions in the following figures to set up
your phone. Before you insert or remove the SIM card,
power off your phone.
When using the SIM ejector pin, exercise caution to
avoid injuring yourself or damaging your phone.
Keep the pin away from children to prevent them
from accidentally swallowing it or injuring
themselves.
Caution
Insert your SIM card in the correct card slot;
otherwise, your phone may not detect the card.
NJDSP4%
0S
NJDSP4%
3.'2
3.'2

4
Dual card dual standby single pass
MHA-L29 :Your phone supports dual SIM cards.
Both SIM cards are available at the same time when
you are not using your phone. However, while one
SIM card is active, the other is unavailable. This is
known as dual card dual standby single pass.
For example, while you are using SIM card 1's data
service, SIM card 2's data service will be disabled. And,
while you are on a call using SIM card 1, SIM card 2 will
be unavailable. Someone calling SIM card 2 while you are
on a call using SIM card 1 will either reach your voicemail
or hear a message such as "The person you called cannot
be reached at the moment. Please try later." The
message heard will vary depending on service provider.
Your phone's single pass feature helps reduce power
consumption and increase standby time.
Contact your service provider for information about
subscribing to notification services.
Safety Information
Please read all of the safety information carefully before
using your device to ensure its safe and proper operation
and to learn how to dispose of your device properly.
Viewing the safety and regulatory
information
For more information on safety, touch Settings > About
phone
> legal information > Safety information .

5
For more information on regulations, touch
Settings >
About phone > Authentication info .
Operation and safety
• To prevent possible hearing damage, do not listen at
high volume levels for long periods.
• Using an unapproved or incompatible power
adapter, charger or battery may damage your
device, shorten its lifespan or cause a fire, explosion
or other hazards.
• Ideal operating temperatures are 0 °C to 35 °C. Ideal
storage temperatures are –20 °C to +45 °C.
• Pacemaker manufacturers recommend maintaining
a minimum distance of 15 cm between a pacemaker
and a wireless device to prevent potential
interference with the pacemaker. If using a
pacemaker, hold the device on the side opposite the
pacemaker and do not carry the device in your front
pocket.
• Keep the device and the battery away from excessive
heat and direct sunlight. Do not place them on or in
heating devices, such as microwave ovens, stoves or
radiators.
• Adhere to local laws and regulations while using the
device. To reduce the risk of accidents, do not use
your device while driving.

6
• While flying in an aircraft or immediately before
boarding, ensure that you use your device according
to the instructions provided. Using a wireless device
in an aircraft may disrupt wireless networks, present
a hazard to aircraft operations or be illegal under
law.
• To prevent damage to your device's parts or internal
circuits, do not use it in dusty, smoky, damp or dirty
environments or near magnetic fields.
• When charging the device, make sure the power
adapter is plugged into a socket near the devices and
is easily accessible.
• Unplug the charger from the electric socket and from
the device when not in use.
• Do not use, store or transport the device where
flammables or explosives are stored (e.g. in a petrol
station, oil depot or chemical plant). Using your
device in these environments increases the risk of
explosion or fire.
• Dispose of this device, the battery and accessories
according to local regulations. They should not be
disposed of in normal household waste. Improper
battery use may lead to fire, explosion or other
hazards.
• Use only the following Huawei AC adapters/power
supplies: HUAWEI: HW-050450B00, HW-
050450E00, HW-050450U00, HW-050450A00
.
• Please consult your doctor and the device
manufacturer to determine if operation of your

7
phone may interfere with the operation of your
medical device.
• If you must make or answer a call, stop your vehicle
at a safe location first.
Potentially Explosive Atmosphere
Power off your device in any area with a potentially
explosive atmosphere, and comply with all signs and
instructions. Areas that may have potentially explosive
atmospheres include the areas where you would
normally be advised to turn off your vehicle engine.
Triggering of sparks in such areas could cause an
explosion or a fire, resulting in bodily injuries or even
deaths. Do not power on your device at refueling points
such as service stations. Comply with restrictions on the
use of radio equipment in fuel depots, storage, and
distribution areas, and chemical plants. In addition,
adhere to restrictions in areas where blasting operations
are in progress. Before using the device, watch out for
areas that have potentially explosive atmospheres that
are often, but not always, clearly marked. Such locations
include areas below the deck on boats, chemical transfer
or storage facilities, and areas where the air contains
chemicals or particles such as grain, dust, or metal
powders. Ask the manufacturers of vehicles using
liquefied petroleum gas (such as propane or butane)
whether this device can be safely used in their vicinity.
EU regulatory conformance
Body worn operation
The device complies with RF specifications when used
near your ear or at a distance of 0.5 cm from your body.

8
Ensure that the device accessories, such as a device case
and device holster, are not composed of metal
components. Keep the device away from your body to
meet the distance requirement.
MHA-L09 ： The highest SAR value reported for this
device type when tested at the ear is 1.64 W/kg, and
when properly worn on the body is 1.36 W/kg.
MHA-L29 ： The highest SAR value reported for this
device type when tested at the ear is 1.64 W/kg, and
when properly worn on the body is 1.36 W/kg.
Statement
Huawei Technologies Co., Ltd. hereby declares that this
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC and
2009/125/EC.
The most recent, effective version of the DoC can be
viewed at http://consumer.huawei.com/certification.
The following marking is included in the product:
This device may be operated in all member states of the
EU.
Adhere to national and local regulations where the
device is used.
This device may be restricted for use, depending on the
local network.

9
Restrictions in the 2.4 GHz band:
Norway
: This subsection does not apply for the
geographical area within a radius of 20 km from the
centre of Ny-Ålesund.
Restrictions in the 5 GHz band:
WLAN function of this device is restricted only to indoor
use when operating in the 5150 to 5350 MHz frequency
range.
FCC Regulatory Compliance
Body worn operation
The device complies with RF specifications when used
near your ear or at a distance of 1.5 cm from your body.
Ensure that the device accessories, such as a device case
and device holster, are not composed of metal
components. Keep the device away from your body to
meet the distance requirement.
Certification information (SAR)
This device is also designed to meet the requirements for
exposure to radio waves established by the Federal
Communications Commission (USA).
The SAR limit adopted by the USA is 1.6 W/kg averaged
over one gram of tissue. The highest SAR value reported
to the FCC for this device type complies with this limit.
MHA-L09 ： The highest SAR value reported to the FCC
for this device type when using at the ear is 1.42 W/kg,
and when properly worn on the body is 0.60 W/kg, and
when using the Wi-Fi hotspot function is 1.39 W/Kg.
MHA-L29 ： The highest SAR value reported to the FCC
for this device type when using at the ear is 1.42 W/kg,

10
and when properly worn on the body is 0.60 W/kg, and
when using the Wi-Fi hotspot function is 1.39 W/Kg.
FCC statement
This device has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This device generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on, the
user is encouraged to perform one or more of the
following operations to try to correct the interference:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the device into an outlet on a circuit different
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.

11
Caution: Any changes or modifications to this device not
expressly approved by Huawei Technologies Co., Ltd. for
compliance could void the user's authority to operate the
device.
Legal Notice
Trademarks and Permissions
, and are trademarks or
registered trademarks of Huawei Technologies Co., Ltd.
Android™ is a trademark of Google Inc.
LTE is a trade mark of ETSI.
The
Bluetooth
®
word mark and logos are registered
trademarks owned by
Bluetooth SIG, Inc. and any use of
such marks by Huawei Technologies Co., Ltd. is under
license.
Wi-Fi
®
, the Wi-Fi CERTIFIED logo and the Wi-Fi logo are
trademarks of Wi-Fi Alliance.
Privacy Policy
To better understand how we protect your personal
information, please see the privacy policy at
http://consumer.huawei.com/privacy-policy.
Copyright © Huawei Technologies Co., Ltd.
2016. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY,
AND DOES NOT CONSTITUTE ANY KIND OF
WARRANTIES.

12
The pictures in this guide are for reference only. The
actual product may vary. This guide is provided "as
is" and nothing contained herein constitutes a
warranty of any kind, either express or implied.
EU Declaration of Conformity
For the following equipment
Product name Smart Phone
Model MHA-L09
Manufacturer’s
Name
Huawei Technologies Co., Ltd.
Manufacturer’s
Address
Administration Building, Headquarters of Huawei
Technologies Co., Ltd., Bantian, Longgang District,
Shenzhen, 518129, P.R.C
We, Huawei Technologies Co.,Ltd. declare under our sole responsibility
that the above referenced product complies with the following directives and
standards:
R&TTE Directive1999/5/EC
Safety
Article3.1(a)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013;
EMC
Article3.1(b)
EN 301 489-1 V1.9.2; EN 301 489-3 V1.6.1; EN 301 489-
17 V2.2.1; EN 301 489-7 V1.3.1;
EN 301 489-24 V1.5.1
Health
Article3.1(a)
EN 50566:2013; EN 62209-2:2010; EN 62209-1:2006;EN
62479:2010;EN 50360:2001/A1:2012;
Radio
Article3.2
EN 300 328 V1.9.1; EN 301 893 V1.8.1; EN 301 511
V12.1.1; EN 300 440-1 V1.6.1;
EN 300 440-2 V1.4.1;EN 301 908-1 V7.1.1; EN 301 908-
13 V6.2.1; EN 301 908-2 V6.2.1;
EN 302 291-1 V1.1.1; EN 302 291-2 V1.1.1
The conformity assessment procedure as referenced in Article 10 and
detailed in Annex IV of the R&TTE directive has been followed with the
involvement of a notified body:
Notified Body : CETECOM ICT SERVICES GMBH Notified Body
number:0682
RoHS Directive
2011/65/EU
EN50581:2012
Responsible for making this declaration is the:
Manufacturer Authorised representative established within the EU
Person responsible for making this declaration
Name, Surname : KangYing
Position/Title : Regulatory Compliance Manager
China, Shenzhen 2016-09-0
(Place) (Date) (Company stamp and legal signature)

13
EU Declaration of Conformity
For the following equipment
Product name Smart Phone
Model MHA-L29
Manufacturer’s
Name
Huawei Technologies Co., Ltd.
Manufacturer’s
Address
Administration Building, Headquarters of Huawei
Technologies Co., Ltd., Bantian, Longgang District,
Shenzhen, 518129, P.R.C
We, Huawei Technologies Co., Ltd. declare under our sole responsibility that
the above referenced product complies with the following directives and
standards:
R&TTE Directive1999/5/EC
Safety
Article3.1(a)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/A2:2013;
EMC
Article3.1(b)
EN 301 489-1 V1.9.2; EN 301 489-3 V1.6.1; EN 301 489-
17 V2.2.1; EN 301 489-7 V1.3.1;
EN 301 489-24 V1.5.1
Health
Article3.1(a)
EN 50566:2013; EN 62209-2:2010; EN 62209-1:2006;EN
62479:2010;EN 50360:2001/A1:2012;
Radio
Article3.2
EN 300 328 V1.9.1; EN 301 893 V1.8.1; EN 301 511
V12.1.1; EN 300 440-1 V1.6.1;
EN 300 440-2 V1.4.1;EN 301 908-1 V7.1.1; EN 301 908-
13 V6.2.1; EN 301 908-2 V6.2.1;
EN 302 291-1 V1.1.1; EN 302 291-2 V1.1.1
The conformity assessment procedure as referenced in Article 10 and
detailed in Annex IV of the R&TTE directive has been followed with the
involvement of a notified body:
Notified Body : CETECOM ICT SERVICES GMBH Notified Body
number:0682
RoHS Directive
2011/65/EU
EN50581:2012
Responsible for making this declaration is the:
Manufacturer Authorised representative established within the EU
Person responsible for making this declaration
Name, Surname :KangYing
Position/Title : Regulatory Compliance Manager
China, Shenzhen 2016-09-08
(Place) (Date) (Company stamp and legal signature)

14
Pour plus d'informations
Ouvrez HiCare pour lire le guide de l'utilisateur et les
informations de service ou chercher de l'aide auprès du
forum en ligne.
Allez à http://consumer.huawei.com/fr pour télécharger
le guide de l'utilisateur pour votre appareil et lire les FAQ,
la politique de confidentialité et d'autres informations.
Allez sur
Paramètres > À propos du téléphone >
Informations légales pour lire les informations
juridiques.
Veuillez visiter http://consumer.huawei.com/fr/support
pour les informations les plus à jour de contacts sur votre
pays ou votre région.
Français

15
Votre téléphone en un clin d’œil
Commençons par une vue générale de votre téléphone.
Veuillez maintenir le bouton d’alimentation appuyé pour
allumer ou éteindre votre téléphone.
Pour un rallumage forcé, maintenez le bouton
d'alimentation appuyé jusqu'à la vibration de votre
téléphone.
Témoin d'état
Écouteur
Appareil photo frontal
Capteur infrarouge
Bouton de volume
Bouton
d'alimentation
Port USB-C
Prise micro-casque
Capteur de lumière
Caméra à
double
objectif
Capteur laser
Scanneur
d'empreinte
digitale
Microphone
Microphone
Flash double
tonalité

16
Commencer
Veuillez suivre les instructions des illustrations suivantes
pour installer votre téléphone. Éteignez votre téléphone
avant d'insérer ou de retirer une carte SIM.
Veuillez faire attention lors de l'utilisation d'une
épingle à éjection de SIM afin d'éviter de vous faire
mal aux doigts ou d'endommager votre téléphone.
Rangez cette épingle dans un endroit sécurisé
inaccessible aux enfants afin de prévenir les risques
d'avalement ou de blessures accidentelles.
Caution
Insérez la carte SIM dans l'emplacement exact pour
assurer sa reconnaissance par votre téléphone.
NJDSP4%
PV
NJDSP4%
3.'2
3.'2