Sony Handycam Vision CCD-TRV89E User manual

Sony Corporation
CCD-TRV89E/TRV95/TRV95E/TRV95PK/TRV99/TRV99E RMT-708/717
SERVICE MANUAL
CCD-TRV89E/TRV95/TRV95E/TRV95PK/
TRV99/TRV99E
RMT-708/717
SERVICE MANUAL
MICROFILM
For MECHANISM ADJUSTMENTS, refer to
the“8mmVideoMECHANICALADJUSTMENT
MANUAL VII” (9-973-801-11).
SPECIFICATIONS
HVIDEO CAMERA RECORDER
— Continued on next page —
B MECHANISM
Photo : CCD-TRV99E
: RMT-717
Video camera recorder
System
Video recording system
CCD-TRV95/TRV95PK/TRV99 :
4 rotary heads (SP/LP independent heads)
CCD-TRV89E/TRV95E/TRV99E :
2 Rotary heads
Helical scanning FM system
Audio recording system
Rotary heads, FM system
Video signal
CCD-TRV95 (US, CND)/TRV99 :
NTSC color, CCIR standards
CCD-TRV95 (E, JE)/TRV95PK :
NTSC color, EIA standards
CCD-TRV89E/TRV95E/TRV99E :
PAL color CCIR standards
Usable cassette
8mm video format cassette
Hi8 or standard 8
Recording / Playback time
CCD-TRV95/TRV95PK/TRV99 :
(using 120 min. cassette)
SP mode: 2 hours
LP mode: 4 hours
CCD-TRV89E/TRV95E/TRV99E :
(using 90 min. cassette)
SP mode: 1 hours and 30 minutes
LP mode: 3 hours
Fastforward/rewindtime
CCD-TRV95/TRV95PK/TRV99 :
(using 120 min. cassette) Approx. 5 min.
CCD-TRV89E/TRV95E/TRV99E :
(using 90 min. cassette) Approx. 5 min.
Image device
CCD (Charge Coupled Device)
Viewfinder
Electronic viewfinder
CCD-TRV89E : Monochrome
CCD-TRV95/TRV95E/TRV95PK/
TRV99/TRV99E :
Color 113,578 (521 x 218)
Lens
Combined power zoom lens
Filter diameter 17/16 in. (37 mm)
CCD-TRV95 (US,CND)/TRV95E/
TRV99 :
18 x (Optical), 72 x (Digital)
CCD-TRV89E/TRV95 (E, JE)/
TRV95PK/TRV99E :
18 x (Optical), 220 x (Digital)
Focal distance
3/16 - 8 in. (4.1 - 73.8 mm)
When converted to a 35 mm still
camera
1 7/8 - 33 1/2 in. (47.2 - 850 mm)
Color temperature
Auto
Minimum illumination
0.7 lux (F 1.4)
0 lux (in NightShot mode)*
* Object invisible for the dark can be
shot with infrared lighting.
Illumination range
0.7 lux to 100,000 lux
Recommended illumination
More than 100 lux
LCD screen
Picture
4 inches measured diagonally
3 1/4 x 2 3/8 in.(80.7 x 58.9 mm)
On-screen display
TN LCD/TFT active matrix method
Total dot number
112.086 (479 x 234)
Input and output connectors
S video input/output
(CCD-TRV89E/TRV95/TRV95PK/
TRV99/TRV99E only)
4-pin mini DIN
Luminance signal :
1 Vp-p, 75 ohms, unbalanced
Chrominance signal
CCD-TRV95/TRV95PK/TRV99 :
0.286Vp-p, 75 ohms, unbalanced
CCD-TRV89E/TRV95E/TRV99E :
0.3Vp-p, 75 ohms, unbalanced
Video input/output
(CCD-TRV89E/TRV95/TRV95PK/
TRV99/TRV99E only)
Phono jack, 1Vp-p, 75 ohms, unbalanced
Audio input/output
(CCD-TRV89E/TRV95/TRV95PK/
TRV99/TRV99E only)
Phono jacks (2: stereo L and R) 327
mV, (at output impedance 47 kilohms)
impedance less than 2.2 kilohms
RFU DC OUT
Special minijack, DC 5V
Headphone jack
Stereo minijack (ø 3.5 mm)
LANC control jack
Stereo mini-minijack (ø 2.5 mm)
MIC jack
Mini jack, 0.388mV low impedance
with 2.5 to 3.0 V DC, output impedance
6.8 kilohms (ø 3.5 mm) Stereo type
Speaker
Dynamic speaker
Intelligent accessory shoe
8-pin connector
General
Powerrequirements
7.2V (battery pack)
8.4V (AC power adaptor)
Sony Corporation
Personal A&V Products Company9-974-055-11
98C0989-1
Printed in Japan © 1998. 3
Published by Quality Engineering Dept.
(Osaki East)
– 292 –
CCD-TRV89E/TRV95/TRV95E/TRV95PK/TRV99/TRV99E
US Model
Canadian Model
CCD-TRV95/TRV99
E Model
CCD-TRV89E/TRV95/TRV95PK/TRV99E
AEP Model
UK Model
CCD-TRV95E
Hong Kong Model
CCD-TRV89E/TRV99E
Tourist Model
CCD-TRV89E/TRV95/TRV99E
Australian Model
Chinese Model
CCD-TRV89E/TRV99E

AC power adaptor
Powerrequirements
100 -240 V AC, 50/60 Hz
Powerconsumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in operating mode
Operating temperature
32°F to 104°F(0°C to 40°C)
Storage temperature
-4°F to +140°F(-20°C to +60°C)
Dimentions (Approx.)
5 x 1 9/16 x 2 1/2 in.
(125 x 39 x 62 mm)(w/h/d)
excluding projecting parts
Mass (Approx.)
9.8 oz (280 g) excluding power cord
(Main lead)
Design and specifications are subject to
change without notice.
• Abbreviation
CND : Canadian Model
JE : Tourist Model
Average power consumption
(when using the battery pack)
During camera recording using
LCD
CCD-TRV95/TRV95PK/TRV99 : 3.8 W
CCD-TRV89E/TRV95E/TRV99E : 3.9 W
Viewfinder
CCD-TRV95/TRV95PK/TRV99 : 2.6 W
CCD-TRV89E/TRV95E/TRV99E : 2.7 W
Operating temperature
32°F to 104°F(0°C to 40°C)
Storage temperature
-4°F to +140°F(-20°C to +60°C)
Dimentions (Approx.)
CCD-TRV89E :
4 3/8 x 5 x 8 1/2 in.
(110 x 124 x 213 mm)(w/h/d)
CCD-TRV95/TRV95E/TRV95PK/
TRV99/TRV99E :
4 3/8 x 5 x 8 1/2 in.
(110 x 125 x 213 mm)(w/h/d)
Mass (Approx.)
2 lb 3 oz (1 kg)
excluding the battery pack, lithium
battery, cassette and shoulder strap
2 lb 6 oz (1.1 kg)
including the battery pack NP-F330,
lithium battery CR2025, cassette and
shoulder strap
Microphone
Stereo type
Supplied accessories
See page 4.
ATTENTIONAU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE !SUR LES
DIAGRAMMESSCHÉMATIQUESET LALISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTSIDENTIFIED BYMARK !ORDOTTEDLINE WITH
MARK!ON THE SCHEMATIC DIAGRAMSAND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboardwiring toensure thatnowires are“pinched”
or contact high-wattage resistors.
3. Look for unauthorizedreplacement parts,particularly transistors,
that were installed during a previous repair. Point them out to
the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and recommend
their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit board Repairing
• Keep the temperatureofthe solderingironaround270°Cduring
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
– 2 –
FOR CAMERA COLOR REPRODUCTION ADJUSTMENT Take a copy CAMERACOLOR REPRODUCTION FRAME
and Parts reference sheets with a clear sheet for use.
CCD-TRV89E/TRV95E/TRV99E
For NTSC model
CCD-TRV95/TRV95PK/TRV99
For PAL model

– 3 –
CCD- TRV95E AEP, UK PAL TYPE C RMT-717 18X 72X ¬ ¬ 3heads ¬ G G ¬ G
CCD- TRV89E E, HK, AUS, CN, JE PAL TYPE A RMT-708 18X 220X ¬ ¬ 3heads G ¬ G G ¬
CCD- TRV99E E, HK, AUS, CN, JE PAL TYPE E RMT-717 18X 220X ¬ ¬ 3heads ¬ ¬ ¬ ¬ G
CCD- TRV99 US, CND NTSC TYPE D RMT-717 18X 72X ¬ ¬ 5heads ¬ ¬ ¬ ¬ G
CCD- TRV95/ TRV95PK E, JE NTSC TYPE B RMT-708 18X 220X G G 5heads G ¬ ¬ ¬ G
CCD- TRV95 US, CND NTSC TYPE B RMT-708 18X 72X G G 5heads G ¬ ¬ ¬ G
Table for difference of function
Remark ¬:VC-195 board IC204 is CXD3131 ¬: VC-195 board IC204 is CXD3131 ¬: with VC-195 board IC701 ¬: with FK-8500 block S005,007 ¬: with VC-195 board IC751 ¬: with VF-122, 123 board, LB-56 board ¬: with VF-99 board
• Abbreviation
CND : Canadian Model HK : Hong Kong Model AUS : Australian Model JE : Tourist Model CN : Chinese Model
Model Destination Color system Classification Remote Commander Lens Optical
Digital
Photo mode Digital effect 5heads/3heads Time code VTR REC Laser Link Color EVF B/W EVF

– 4 –
Supplied accessories
1Wireless Remote Commander (1)
RMT-717 : CCD-TRV95E/TRV99/TRV99E
RMT-708 : Except CCD-TRV95E/TRV99/TRV99E
2AC-L10A/L10B/L10C AC power adaptor
3NP-F330 Battery pack (1)
4CR2025 Lithium Battery (1)
The lithium battery is already installed in your camcorder.
5Size AA (R6) battery for Remote Commander
(2)
6A/ V connecting cable (1)
7Shoulder strap (1)
8Battery case (1)
CCD-TRV95 : CND/TRV99
1
4
8
7
3
2
56
90
• Abbreviation
CND : Canadian Model
HK : Hong Kong Model
AUS : Australian Model
JE : Tourist Model
!¡
921 pin adaptor (1)
VMC-91 : CCD-TRV95E
!º 2 pin conversion adaptor (1)
CCD-TRV89E : E, HK/TRV95 : E/TRV95PK/TRV99E : E,
HK, AUS
!¡ 2 pin conversion adaptor (1)
CCD-TRV89E : JE/TRV95 : JE/TRV99E : JE

– 5 –
Battery terminal ‘
DC IN terminal
Battery SIG terminal
Battery switch
Battery terminal
’
SERVICE NOTE
6 Pull the timing belt in the direction of arrow A
with a pinsette while pressing the cassette lid
(take care not to damage) to adjust the
bending of a tape.
7 Let go your hold the cassette
lid and rise the cassette
compartment to take out a cassette.
A
Pinsette
Timing belt
Press the cassette lid not to rise the
cassette compartment
+–
[DC power supply]
(+5V)
Loading motor
Adjust the bending of a tape
Timing belt
1Refer to 2-1. to remove the front panel assembly.
2Refer to 2-3. to remove the cabinet (R) assembly.
3Refer to 2-10. to remove the battery panel assembly.
4Refer to 2-10. to remove the cabinet (L) assembly.
5Add +5V from the DC POWER SUPPLY and unload with a
pressing the cassette lid.
2. TO TAKE OUTA CASSETTE WHEN NOT EJECT (FORCE EJECT)
1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied (8.4V) to the
battery terminal using the service power cord (J-6082-223-A), the
power is shut off so that the unit cannot operate.
This following two methods are available to prevent this. Take note
of which to use during repairs.
Method 1.
Connect the servicing remote commander RM-95 (J-6082-053-B)
to the LANC jack, and set the remote commander switch to the
“ADJ” side.
Method 2.
Press the battery switch of the battery terminal using adhesive tape,
etc.
Method 3.
Use the DC IN terminal. (Use the AC power adaptor.)

– 6 –
Note: The self-diagnosis display data will be backed up by the coin-type lithium battery. When this coin-type lithium battery is
disconnected, the self-diagnosis data will be lost by initialization.
1. Self-diagnosis Function
When problems occur while the unit is operating, the self-diagnosis
function starts working, and displays on the viewfinder or Display
window what to do. This function consists of two display; self-
diagnosis display and service mode display.
Detailsof theself-diagnosis functions are providedin the Instruction
manual.
SELF-DIAGNOSIS FUNCTION
2. Self-diagnosis display
When problems occur while the unit is operating, the counter of the
viewfinder or Display window shows a 4-digit display consisting
ofan alphabetandnumbers,whichblinks at 3.2Hz.This5-character
display indicates the “repaired by:”, “block” in which the problem
occurred, and “detailed code” of the problem.
3. Service Mode Display
The service mode display shows up to six self-diagnosis codes shown in the past.
3-1. Display Method
While pressing the “STOP” key, set the switch from OFF to “VTR or PLAYER”, and continue pressing the “STOP” key for 5 seconds
continuously. The service mode will be displayed, and the counter will show the backup No. and the 5-character self-diagnosis codes.
3-2. Switching of Backup No.
By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the
problem occurred. (If the number of problems which occurred is less than 6, only the number of problems which occurred will be shown.)
[1] : Occurred first time [4] : Occurred fourth time
[2] : Occurred second time [5] : Occurred fifth time
[3] : Occurred third time [6] : Occurred the last time
3-3. End of Display
Turning OFF the power supply will end the service mode display.
Viewfinder Display window
Blinks at 3.2 Hz
Refer to page7
Self-diagnosis Code table
C : Corrected by customer
H : Corrected by dealer
E : Corrected by service engineer
Repairede by : Block Detailed Code
Indicates the appropriate step to be taken
E. g.
31 ... Reload the tape.
32 ... Turn on power again.
C3 1 1 1
C : 3 1 : 1 1
C : 3 1 : 1 1
Viewfinder Display window
Lights up
Order of previous errors
Backup No. Self-diagnosis codes
[3] C : 3 1 : 1 1
3 C : 3 1 : 1 1
[3] C : 3 1 : 1 1
Display window
Control dial

– 7 –
Remove the cassette, and insert it again after one hour.
Clean with the optional cleaning cassette.
Use the InfoLITHIUM battery.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Load the tape again, and perform operations from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Remove the battery or power cable, connect, and perform operations
from the beginning.
Inspect the lens block focus reset sensor (Pin !ª of CN551 ofVC-195
board) when focusing is performed when the focus dial is rotated in the
focus manual mode and the focus motor drive circuit (IC552 of VC-195
board) when the focusing is not performed.
Inspect the lens block zoom reset sensor (Pin @¡ of CN551 ofVC-195
board) when zooming is performed when the zoom lens is operated and
the zoom motor drive circuit (IC552 ofVC195 board) when zooming is
not performed.
Inspect pitch angular velocity sensor (SE451 of SE-74 board) peripheral
circuits.
Inspect yaw angular velocity sensor (SE452 of SE-74 board) peripheral
circuits.
4. Self-diagnosis Code Table
Condensation.
Video head is dirty.
Non-standard battery is used.
LOAD direction. Loading does not
complete within specified time
UNLOAD direction. Loading does not
complete within specified time
T reel side tape slacking when unloading.
S reel side tape slacking when unloading.
T reel fault
S reel fault
FG fault when starting capstan
FG fault during normal capstan operations
FG fault when starting drum
PG fault when starting drum
FG fault during normal drum operations
PG fault during normal drum operations
Phase fault during normal drum operations
LOAD direction loading motor time-out
UNLOAD direction loading motor time-
out
T reel side tape slacking when unloading.
S reel side tape slacking when unloading.
T reel fault
S reel fault
FG fault when starting capstan
FG fault during normal capstan operations
FG fault when starting drum
PG fault when starting drum
FG fault during normal drum operations
PG fault during normal drum operations
Phase fault during normal drum operations
Difficult to adjust focus
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
Handshake correction function does not
work well.(With pitch angular velocity
sensor output stopped)
Handshake correction function does not
work well.(With yaw angular velocity
sensor output stopped)
Self-diagnosis Code
Repaired by:
Block
Function Detailed Code Symptom/State Correction
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
E
E
E
E
21
22
23
31
31
31
31
31
31
31
31
31
31
31
31
31
32
32
32
32
32
32
32
32
32
32
32
32
32
61
61
62
62
00
00
00
10
11
20
21
22
23
30
31
40
41
42
43
44
10
11
20
21
22
23
30
31
40
41
42
43
44
00
10
00
01

– 8 –
SERVICE NOTE
1. Power Supply During Repairs ......................................... 5
2. To Take out a Cassette when not Eject (Force Eject)....... 5
Self-Diagnosis Function
1. Self-diagnosis function ....................................................6
2. Self-diagnosis Display ..................................................... 6
3. Service Mode Display......................................................6
3-1. Display Method................................................................ 6
3-2. Switching of Backup No.................................................. 6
3-3. End of Display ................................................................. 6
4. Self-diagnosis Code Table ............................................... 7
1. GENERAL
Using this manual ......................................................................1-1
Checking supplied accessories ..................................................1-1
Installing and Charging the battery pack ...................................1-1
Inserting a cassette.....................................................................1-2
Camera recording ......................................................................1-3
Hints for better Shooting ...........................................................1-4
Checking the recorded picture ...................................................1-5
Playing back a tape ....................................................................1-5
Searching for the end of the picture ..........................................1-7
Using alternative power sources ................................................1-7
Changing the mode settings ......................................................1-7
Shooting with backlighting .......................................................1-9
Using the FADER function .......................................................1-9
Shooting in the dark (NightShot) ............................................1-10
Photo recording .......................................................................1-10
Using the wide mode function.................................................1-11
Using the PROGRAM AE function.........................................1-11
Superimposing a still picture on a moving picture ..................1-12
Recording still pictures successively .......................................1-12
Replacing a brighter potion of a still picture
with a moving picture ..............................................................1-12
Adding an incidential image to pictures ..................................1-13
Using slow shutter ...................................................................1-13
Adding an old movie type atmosphere to pictures ..................1-13
Focusing manually...................................................................1-13
Enjoying picture effect ............................................................1-14
Adjusting the exposure ............................................................1-14
Superimposing a title ...............................................................1-15
Making your own titles............................................................1-15
Re-recording a picture in the middle of a recorded tape .........1-16
Recording with the date/time...................................................1-16
Optimizing the recording condition.........................................1-16
Releasing the STEADY SHOT function .................................1-17
Watching on a TV screen .........................................................1-17
Enjoying digital effect during playback ..................................1-17
Searching the boundaries of recorded date..............................1-18
Returning to a pre-registered position .....................................1-18
Locating the marking position .................................................1-18
Writing the RC Time code on a recorded tape ........................1-20
Editing onto another tape.........................................................1-20
Charging the lithium battery in the camcoder .........................1-20
Resetting the date and time......................................................1-21
Simple setting of clock by time difference ..............................1-21
Usable cassettes and playback modes .....................................1-21
Tips for using the battery pack ................................................1-22
Maintenance information and precautions ..............................1-23
Using your camcorder abroad .................................................1-24
Self-diagnosis display..............................................................1-24
Identifying the parts.................................................................1-25
Warning Indicators ..................................................................1-27
TABLE OF CONTENTS
2. DISASSEMBLY
2-1. Removal of Front Panel Block .........................................2-1
2-2. Removal of Cabinet (S) Block .........................................2-1
2-3. Removal of Cabinet (R) Block.........................................2-2
2-4. Removal of EVF Block-1 (Color) ....................................2-2
2-5. Removal of EVF Block-1 (B/W) .....................................2-2
2-6. Removal of LCD Block ...................................................2-2
2-7. Removal of CF-52 Board and Control Switch Block
(MF-8500) ........................................................................2-3
2-8. Removal of EVF Block-2 (B/W) .....................................2-3
2-9. Removal of EVF Block-2 (Color) ....................................2-3
2-10. Removal of Cabinet (L) Block and
Battery Panel Block .........................................................2-4
2-11. Removal of Cassette Lid Assembly .................................2-4
2-12. Removal of Zoom Lens Block .........................................2-4
2-13. Removal of Control Switch Block (FK-8500) .................2-4
2-14. Removal of DD-105 Board and PJ-85 Board ..................2-5
2-15. Removal of VC-195 and SE-74 Board.............................2-5
2-16. Service Position ...............................................................2-5
2-17. Circuit Boards Locations .................................................2-6
3. BLOCK DIAGRAMS
3-1. Overall Block Diagram ....................................................3-1
3-2. Camera/Video Block Diagram .........................................3-5
3-3. VTR/Camera Control Block Diagram .............................3-9
3-4. Servo Block Diagram.....................................................3-12
3-5. Mode Control Block Diagram........................................3-15
3-6. Audio Block Diagram ....................................................3-19
3-7. LCD Block Diagram ........................................................3-23
3-8. Color EVF Block Diagram ............................................3-26
3-9. B/W EVF Block Diagram ..............................................3-29
3-10. Power Block Diagram ....................................................3-33

– 9 –
4. PRINTED WIRING BOARDSAND SCHEMATIC
DIAGRAMS
4-1. Frame Schematic Diagram (1) ...........................................4-1
• Frame Schematic Diagram (2) ........................................4-4
4-2. Printed Wiring Boards and Schematic Diagrams...............4-7
• CD-190 (CCD Imager) Board .........................................4-8
• VC-195 (Camera,Y/C Processor, IN/OUT,
REC/PB Head Amp, Servo/System Control, Servo,
Audio, IR Transmiter, Mode Control) Board ................4-10
• VC-195 (Camera 1) Board ............................................4-16
• VC-195 (Camera 2) Board ............................................4-19
• VC-195 (Y/C Process) Board........................................4-23
• VC-195 (IN/OUT) Board ..............................................4-27
• VC-195 (REC/PB HeadAmp) Board............................4-31
• VC-195 (Servo/System Control) Board ........................4-35
• VC-195 (Servo) Board ..................................................4-38
• VC-195 (Audio) Board..................................................4-41
• VC-195 (IR Transmitter) Board ....................................4-46
• VC-195 (Mode Control) Board .....................................4-49
• SE-74 (Steady Shot) Board ...........................................4-52
• PJ-85 (AV IN/OUT) Board............................................4-55
• MA-313 (Stereo Mic, Laser Link) Board......................4-59
• Control Switch Block (FK-8500/SS-8500) ...................4-63
• CF-52 (Control) Board ..................................................4-65
• PD-93 (RGB Decorder, LCD Drive, Back Light LCD) Board
.......................................................................................4-74
• PD-93 (RGB Decorder) Board ......................................4-77
• PD-93 (LCD Drive) Board ............................................4-80
• PD-93 (Back Light) Board ............................................4-83
• PD-93 (LCD) Board ......................................................4-84
• VF-122 (Color EVF) (Color EVF Model) Board..........4-86
• LB-56 (Back Light) (Color EVF Model) Board ...........4-86
• VF-123 (Color EVF (Color EVF Model)) Board..........4-92
• VF-99 (B/W EVF (B/W EVF Model)) Board...............4-97
• DD-105 (Power) Board ...............................................4-102
5. ADJUSTMENTS
5-1. CAMERA SECTION ADJUSTMENTS ..........................5-1
1-1. Preparations before Adjustment (Camera Section) ..........5-1
1-1-1. List of Service Tools .................................................5-1
1-1-2. Preparations...............................................................5-2
1-1-3. Precautions ................................................................5-4
1. Setting the Switch .....................................................5-4
2. Adjusting Procedure ..................................................5-4
3. Subject.......................................................................5-4
1-1-4. Adjusting Remote Commander.................................5-5
1. Using the adjusting remote commander ....................5-5
2. Precautions upon using the adjusting
remote commander ....................................................5-5
1-1-5. Data Processing .........................................................5-6
1-2. Initialization of D, E, F Page Data....................................5-7
1. Initialization of D, E, F Page Data ............................5-7
2. Modification of D, E, F Page Data ...........................5-7
3. D Page Table .............................................................5-8
4. F Page Table ..............................................................5-9
5. E Page Table ............................................................5-11
1-3. Camera System Adjustments ..........................................5-13
1. G-CAM flip Adjustment .........................................5-13
2. Hall Adjustment ......................................................5-14
3. Flange Back Adjustment .........................................5-15
3-1. Flange BackAdjustment (1) ...................................5-15
3-2. Flange BackAdjustment (2) ...................................5-15
4. Flange Back Check .................................................5-16
5. Picture Frame Setting ..............................................5-16
6. Color Reproduction Adjustment .............................5-17
7. IRIS IN/OUT Adjustment .......................................5-18
8. MAX GAIN Adjustment .........................................5-18
9. Auto White Balance Standard Data Input ...............5-19
10. Auto White Balance Adjustment.............................5-19
11. White Balance Check ..............................................5-20
12. Angular Velocity Sensor SensitivityAdjustment ....5-21
1-4. Color ElectronicViewfinder System Adjustments
(CCD-TRV95/TRV95E/TRV95PK/TRV99/TRV99E) ...5-22
1. EVF Initial Data Input.............................................5-22
2. VCO Adjustment (VF-123 board)...........................5-23
3. Bright Adjustment (VF-123 board).........................5-23
4. Contrast Adjustment (VF-123 board) .....................5-24
5. Backlight Comsumption Current Adjustment
(VF-122 board) .......................................................5-24
6. White Balance Adjustment (VF-123 board) ...........5-24
1-5. Monochrome ElectronicViewfinder System Adjustments
(CCD-TRV89E) ..............................................................5-25
1-5-1. Horizontal Slant Check ...........................................5-25
1-5-2. Centering Adjustment .............................................5-25
1-5-3. Focus Adjustment ....................................................5-25
1-5-4. Aberration Adjustment ............................................5-26
1-5-5. Horizontal AmplitudeAdjustment (VF-99 board) ..5-26
1-5-6. Vertical AmplitudeAdjustment (VF-99 board).......5-27
1-5-7. Brightness Adjustments (VF-99 board) ..................5-27
1-5-8. Horizontal Amplitude, Vertical Amplitude,
Focus Check ............................................................5-27
1-6. LCD System Adjustment ................................................5-28
1. LCD initial data input .............................................5-28
2. VCO adjustment (PD-93 board) .............................5-29
3. D range adjustment (PD-93 board) .........................5-29
4. Bright adjustment (PD-93 board) ............................5-30
5. Contrast adjustment (PD-93 board) ........................5-30
6. V-COM level adjustment (PD-93 board) ................5-31
7. Color adjustment (PD-93 board) .............................5-31
8. V-COM adjustment (PD-93 board) .........................5-32
9. White balance adjustment (PD-93 board) ...............5-32

– 10 –
5-2. MECHANICAL SECTION ADJUSTMENT.................5-33
2-1. Operating without a Cassette ..........................................5-33
2-2. Tape path Adjustment .....................................................5-33
1. Preparations for adjustments ...................................5-33
5-3. VIDEO SECTION ADJUSTMENTS.............................5-34
3-1. Preparations before Adjustment ..............................5-34
3-1-1. Equipments to be Used ...........................................5-34
3-1-2. Precautions on Adjusting ........................................5-35
3-1-3. Adjusting Connectors..............................................5-35
3-1-4. Connecting the Equipments ....................................5-36
3-1-5. Alignment Tape .......................................................5-36
3-1-6. Input/Output Level and Impedance.........................5-38
3-1-7. Recording Mode (Standard 8/Hi8) switching
(Hi8 model) .............................................................5-38
3-1-8. Service Mode ..........................................................5-38
1. Test mode setting.....................................................5-38
2. Emergency memory address ...................................5-39
2-1. EMG CODE (Emergency Code) .............................5-39
2-2. MSW Codes ............................................................5-40
3. Bit value discrimination ..........................................5-41
4. Switch check (1)......................................................5-41
5. Switch check (2)......................................................5-42
6. Headphone jack check ............................................5-42
7. Input/output selection check ...................................5-42
8. LED, LCD (display window) check........................5-43
9. Record of use check ................................................5-43
3-2. System Control SystemAdjustment .......................5-44
1. Initialization of D, E, F Page Data ..........................5-44
2. Battery End Adjustment (VC-195 board) ...............5-44
3-3. Servo System Adjustments ......................................5-45
1. CAP FG Offset Adjustment (VC-195 board)..........5-45
2. Switching Position Adjustment (VC-195 board) ....5-45
3. NTSC LP Mode Switching Position Adjustment
(VC-195 board) (CCD-TRV95/TRV95PK/TRV99) .....5-46
3-4. Video System Adjustments .....................................5-46
1. 28 MHz Origin Oscillation Adjustment
(VC-195 board) .......................................................5-46
2. AFC f0 Adjustment (VC-195 board) ......................5-47
3. Filter f0 Adjustment (VC-195 board)......................5-47
4. Y OUT LevelAdjustment (VC-195 board) .............5-48
5. C OUT LevelAdjustment (VC-195 board) .............5-48
6. RP Filter f0Adjustment (VC-195 board)................5-49
7. RECY Current Adjustment (VC-195 board) ..........5-50
8. Hi8 REC L LevelAdjustment (VC-195 board) ......5-51
9. REC C CurrentAdjustment (VC-195 board) ..........5-52
3-5. IR Transmitter Adjustments
(CCD-TRV95/TRV95PK/TRV99/TRV99E) ...........5-53
1. IRVideo Carrier FrequencyAdjustment
(VC-195 board) .......................................................5-53
2. IRVideo Deviation Adjustment (VC-195 board)....5-53
3. IRAudio Deviation Adjustment (VC-195 board) ...5-54
3-6. Stereo Audio System Adjustment ...........................5-55
1. 1.5 MHz DeviationAdjustment (VC-195 board) ....5-56
2. 1.7 MHz DeviationAdjustment (VC-195 board) ....5-56
3. BPF f0 Adjustment (VC-195 board) .......................5-58
3-7. Arrangement Diagram forAdjustment Parts...........5-60
6. REPAIR PARTS LIST
6-1. Exploded Views .......................................................6-1
6-1-1. Cabinet (L) Block Assembly....................................6-1
6-1-2. Front Panel BlockAssembly....................................6-2
6-1-3. Cabinet (R) Block Assembly ...................................6-3
6-1-4. LCD Block Assembly ..............................................6-4
6-1-5. EVF Block (Color EVF) ..........................................6-5
6-1-6. EVF Block (B/W EVF)............................................6-6
6-1-7. Main Boards Assembly ............................................6-7
6-1-8. Battery Panel and CCD BlockAssembly ................6-8
6-1-9. Device Lens (LSV-600A) ........................................6-9
6-1-10. Cassette Compartment Assembly ..........................6-10
6-1-11. LS Chassis Assembly.............................................6-11
6-1-12. Mechanism Chassis Assembly...............................6-12
6-2. Electrical Parts List ................................................6-13