Huck Bird's nest tree with bridge and slide User manual

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
1
AAssembly Instructions
Bird’s nest tree with bridge and slide
Art.-No. 4652-2
Operator: _________________________________________________________
Location: _________________________________________________________

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
2
Revision history
Revision 0 –2015-03-04
The first allowed version JS
Assembly Instructions FH
Revision 3 -2019-10-09
Erdeinschraubanker statt Fundamenteisen PM
All rights reserved
© Copyright 2015 Huck Seiltechnik GmbH

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
3
Please note the explanations and abbreviations and notes.
For any queries please contact the manufacturer
Contents
AAssembly Instructions Bird’s nest tree with bridge and slide Art.-No. 4652-2.........1
1Introduction Assembling..............................................................................................4
2Datasheet: Bird’s nest tree with bridge and slide Art.-Nr.4652-2...............................5
3Delivery contents (parts list with part numbers) ........................................................7
4Assembly instructions................................................................................................15
5Post installation checks .............................................................................................33
BMaintenance instructions Bird’s nest tree with bridge and slide Art.-Nr. 4652-2...35
6Introduction Maintenance...........................................................................................37
7General maintenance information .............................................................................38
8Maintenance timetable................................................................................................40
9Regular maintenance..................................................................................................41
10 Monthly maintenance .................................................................................................42
11 Quarterly maintenance...............................................................................................42
12 Half yearly maintenance.............................................................................................43
13 Annual maintenance...................................................................................................43
14 Maintenance printout..................................................................................................45
15 Hand over document ..................................................................................................47
List of Tables
Table 3-1: Delivery contents, in words ...................................................................................7
Table 3-2: Delivery contents, in symbols................................................................................9

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
4
1 Introduction Assembling
1.1 General information
This equipment should be installed, inspected, maintained and operated in
accordance with EN1176-7 guidelines.
Before installation work commences, please check that you have all of
the equipment and fixation components in the parts list provided (see
Tables 3-1 and 3-2).
Please consider that the installation has to be carried out only on even
terrain (max.slope up to 3%).
Any spare parts that may be required can be obtained directly from your
supplier or from Fa. Huck Seiltechnik GmbH
Adress: Huck Seiltechnik GmbH
Dillerberg 3
D-35614 Aßlar/Berghausen
Tel. [phone]
Fax [phone]
Please do not hesitate to call your supplier if you have any problems during in-
stallation or with any other questions. You can reach us at the following Tel.
[phone].
Following installation, complete assembly instructions, maintenance in-
structions and a maintenance record must be sent to the operator who
must confirm receipt in writing. See the last page of this document.
All nuts and bolts are hot-dip galvanised or stainless steel.
One of the characteristics of stainless steel is that uncontrolled cold
welding may occur when the nuts are tightened. To prevent this, it is
necessary to spray the nuts and bolts with Teflon spray or another simi-
lar lubricant.
We hereby confirm that this play equipment has been tested
and certified in accordance with the play equipment standard EN 1176-1.

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
5
2 Datasheet: Bird’s nest tree with bridge and slide
Art.-Nr.4652-2
1. Component zone: 13200 mm x 7100 mm
Impact area: 16900 mm x 11000 mm
height of fall: 6000 mm
Free height of fall: 2800 mm
2. Required safety surface:
Surface material
Description
mm
Minimum thickness
of layer mm
Maximum height
of fall mm
Topsoil grass
<= 1000
Chipped bark
20 –80 grain size
300
400
<= 2000
<= 3000
Wood chippings
5 –30 grain size
300
400
<= 2000
<= 3000
Sand
0,2 –2 grain size
300
400
<= 2000
<= 3000
Gravel
2 –8 grain size
300
400
<= 2000
<= 3000
Other ground
materials
As recommended
by manufacturer
Critical fall height as
checked
Name and overall dimension of the largest component:
Steel post (1 piece) length 6.20 m, Ø 193.7 mm
Name and weight of the heaviest component:
Steel post (1 piece) ~ 157 Kg
Intended age group: 6 years and over
Please note that this equipment is set in concrete.
Concrete: C25/30
Required concrete: 4,4 m3
Foundations/area to be excavated:
excavated (All foundations must be brought to equal level!)
13 x 0.40 m long x 0.40 m wide, total depth 1.00 m including 10 cm drainage
1 x 2.00 m long x 0.40 m wide, total depth 1.00 m including 10 cm drainage
2 x 1.40 m long x 0.80 m wide, total depth 1.10 m including 10 cm drainage
1 x 1.60 m long x 1.20 m wide, total depth 1.30 m including 10 cm drainage

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
6
Foundation edges must be rounded off (min.R = 100 mm)!
Sizes of fundations are designed for soils class“4-5” (natural ground).
Soil class 3:
Non-cohesive to low-cohesive plasticity, sand, gravel and sand-gravel-
mixtures, with very low portion of stones portion of stones (portion > 30%
with bigger dia-meter of 63 mm grain size)
Soil class 4:
soft to medium plasticity, interleave bound, with minor portion of stone (por-
tion < 30% with bigger diameter of 63 mm grain size)
Soil class 5:
Soil class 5: ground with soil class 3 and 4 with big portion of stones
(portion > 30% with bigger diameter of 63 mm grain size)
IN CASE OF SANDY AND SOFT SOILS, THE SURFACE DIMENSIONS OF FOUNDATIONS HAVE
TO BE ENLARGED FOR ABOUT 50%!.
Assembly time, once foundations complete:
After completion of concrete foundations approx. 7 hours
Required assistance: 3 persons.
Required tools: wheel excavator or similar with a lifting height of approx. 4 m height ladder approx. 4 m long,
spirit level, various wrenches and screwdriver.
Any spare parts which may be required can be obtained directly from your supplier or from
Fa.Huck Seiltechnik GmbH
Adress: Huck Seiltechnik GmbH
Dillerberg 3
D-35614 Aßlar/Berghausen
Tel. [phone]
Fax [phone]
We hereby confirm that this item of play equipment has been tested
and certified in accordance with the play equipment standard EN 1176.
Drawings / Views
All optical drawings are showing only the measurements/dimensions and are no
mandatory technical views of the complete item.
We reserve the right to change technical details of our articles which are serving for
the further development of our articles and are reasonable for the customer.
Measurement tolerances
Because of the properties and characteristics of the components, minor measure-
ment tolerances compared to the indication on the sketches are possible.
This concerns all shown measurements except the foundation measurements resp.
measurements below upper edge ground level/play area.

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
7
3 Delivery contents (parts list with part numbers)
3.1. In words
Table 3-1: Delivery contents, in words
Pos.
Quantity
Element /
Description
Size
O.K.
Mis-
sing
01
1
Steel post
Ø 193,7 mm /
6200 mm lg.
01a
2
Steel post
Ø 159 mm / 4100 mm lg.
02
1
Play part (nets and bird’s
nests)
/
03
1
Mast cap
Ø 219,1 mm / 1240 mm
04
8
Glue-laminated beam
Ø 139 mm / 1650 mm lg.
05
4
Top rope for glulam pole
(pre-assembled on Pos. 03)
1850 mm lg.
06
1
Flag / blue + threaded bolt +
2x nuts
M16
07
1
Traverse
1500 mm lg. /
50x50x5 mm
08
1
Slide
AH 1750 mm /
3750 mm lg. / GFK
101
18
Bow shackle
M8 / VA
102
18
Ground screw anchor
365 mm lg.
103
16
nyloc nut + washer + black
cap
M12
104
8
Ring nut (1x pre-assembled)
M12 / VA
105
8
Red post cap
Ø 139 mm
106
24
Fillister-head screw
3,5 x 25 mm
107
8
Threaded bolt + 2x acorn nut
+ 2x washer
M10 x 175 mm
108
3
Loctite
3 ml
109
8
hexagon socket screw
M12 x 25 mm
110
2
Clamp
Ø 193,7 mm
111
2
oval-head screw + washer
M12x 80 mm
112
1
anchor plate
500 x 500 mm
113
48
Washer (2x pre-assembled)
M12

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
8
114
4
Caps (black)
+ Washers
+ Stop nuts
M12
115
2
Allen screws and Washers
M8 x 75 mm
200
(KNR)
1
PVC pipe
(Provided by customer)
Ø400 x 850 mm
210
2
flagstone
400 x 400 mm
220
(KNR)
2
PVC pipe
(Provided by customer)
Ø250 x 650 mm

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
9
3.2. In symbols
Table 3-2: Delivery contents, in symbols
Pos.
Quanti-
ty
Symbol
01
1
Ø 193,7 mm / 6200 mm lg.
01a
2
Ø 159 mm / 4100 mm lg.
02
1
Play part (Nets, bridge and birds' nests)
03
1
Ø 219,1 mm / 1240 mm

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
10
04
8
Ø 140 mm / 1650 mm lg.
05
4
1850 mm lg.
(Pre-assembled on Pos.3)
06
1
M16
07
1
1500 mm lg. / 50 x 50 x 5 mm
08
1
AH 1750 mm / 3750 mm lg.
101
18
M8

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
11
102
18
365 mm lg.
103
16
M12
104
8
M12 (1x pre-assembled)
105
8
Ø 139 mm
106
24
3,5 x 25 mm
107
8
M10 x 175 mm
108
3
3 ml
109
8
M12 x 25 mm
110
2
Ø 193,7 mm

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
12
111
2
M12 x 80 mm
112
1
500 x 500 mm
113
48
M12
114
4
M12
115
2
M8 x 75 mm
200
(KNR)
1
Ø 400 mm / 850 mm lg.
210
2
400 x 400 mm
220
(KNR)
2
Ø 250 mm / 650 lg.

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
13
4 Abbreviations
AB
Setting time min. 7-8 days
AH
hanging height
ASP
Fix the pipe clamps at the appropriate positions.
D
C25/30 concrete (for foundations)
Q.ty required: 4,4 m2
D.be.
Fill in around the central mast with concrete.
(between drainage tube and central mast)
DT
Detail
EDF
turn the ground anchor in to foundation / don’t press
F
Fall protection
FOU
Foundation
FR
foundation radius at least 100 mm
G
Drainage layer
HK.entf.!!
Remove wooden wedges after concrete work
K
Chain position of chimney net
KELA
Chains should be shortened during installation if necessary.
KNR
Drainage tube / concrete or PVC
lg.
Length
MA!!!
The foundation numbers have to suit with the glulam pole numbers
MEb
Pay careful attention to mark when mounting the post.
MKe
Insert the mast into the drainage tube
MSE
After mounting the steel post and the glue-laminated beams, the ropes must first be
hooked in
O.K
Top edge play level
O.K.F.
Top edge foundation
OAZ
The opening must be show outwards / not in tensile direction
PNU
Lay the net-part packet with the underside around the mast.
PS
Minimum safety area 114,2 m²
SSch
After putting on the post-cap, grease the hexagon-screw and tight up.
TvEM!
Install the cross beam before installing the posts.
UEA!
Smooth out any unevenness in the foundation that occurs when screwing in the ground
anchor. Otherwise a water accumulation develops
VO
Pre-assembled
Foundation edges must be rounded off (min.R = 100 mm
Sizes of fundations are designed for soils class“4-5” (natural ground).
Soil class 3:
Non-cohesive to low-cohesive plasticity, sand, gravel and sand-
gravel-mixtures, with very low portion of stones portion of stones
(portion > 30% with bigger diameter of 63 mm grain size)
Soil class 4:
soft to medium plasticity, interleave bound, with minor portion of
stone (portion < 30% with bigger diameter of 63 mm grain size)
Soil class 5:
Soil class 5: ground with soil class 3 and 4 with big portion of
stones
(portion > 30% with bigger diameter of 63 mm grain size)
IN CASE OF SANDY AND SOFT SOILS, THE SURFACE DIMENSIONS OF FOUN-
DATIONS HAVE TO BE ENLARGED FOR ABOUT 50%!.

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
14
The natural properties of wood can lead to different
cross-sections in heat and humidity.
e.g. Post Ø 180 mm (tolerance 173mm - 183mm)
Possible lengths of the eye bolts or bearings
are then to cut!
Screw locking device!
glue all screws, nuts and sleeves with loctite.
(not less than 5 drops !)
(except for lock nut)

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
15
5 Assembly instructions

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
16

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
17

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
18

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
19

HUCK Seiltechnik GmbH • Dillerberg 3 • D-35614 Asslar-Berghausen
[e-mail] - www.huck.net
\\CAD1\Standard\4652-
2\Montageanleitung\4652_2_Vogelnestbaum_Bruecke_und_GFK_Rutsche_mit_Leimbinder_SO_B_L_01_GBR.doc
20