Humanware BrailleNote Touch Plus User manual

www.setbc.org Page 1 of 3January 2021
1.1 BrailleNote Touch Plus: Adjust Braille Settings
1
To set the Braille code and grade on the device, you
need to configure the
Language Profile
.
Press
SPACEBAR + O
to open the
Options menu
.
SPACEBAR + O
2
To navigate to and select
Configure Language
Profiles
, use first letter navigation “
C
,“ or navigate
using the
NEXT
thumb key, then press
ENTER
or a
cursor routing key.
C
ENTER
3
Select
Primary Language Profile
or the language
profile you wish to configure by pressing
ENTER
or a
cursor routing key.
ENTER
105 – 1750 West 75th Avenue, Vancouver, B.C., Canada V6P 6G2
Phone: [phone] Fax: [phone] www.setbc.org

www.setbc.org Page 2 of 3January 2021
4
To navigate to and select
Preferred Braille Grade for
Entry
, use first letter navigation, press “
P.
”
By default, the setting should be set to “Literary
braille.” The other option is for computer braille. If
you’re fine with “Literary braille,” do nothing.
To configure this setting, press
ENTER
.
Tab to your selection using the
Next
button and
press
ENTER
or cursor routing key to select the
braille grade for entry.
P
ENTER
Next
5
To navigate to and select
Literary Braille Table
, use
first letter navigation, press
L.
To configure this setting, press
ENTER
or cursor
routing key.
L
ENTER

www.setbc.org Page 3 of 3January 2021
6
In Canada, the braille standard is to use the
contracted UEB code. This setting is listed as
“
English UEB Duxbury grade 2.”
To quickly navigate to and select “English UEB
Duxbury grade 2”, use first letter navigation, press
“
E.”
Then tab to your selection using the
Next
button and press
ENTER
to select the braille grade
for entry.
E
Next
ENTER
7
Once you have adjusted the settings, exit the
Options menu by pressing
SPACEBAR + E
to return to
your previous location.
To return to the Main Menu, press
SPACEBAR + 1-2-
3-4-5-6
or the round
Home
button.
SPACEBAR + E
SPACEBAR + 1-2-3-4-5-6