4
extensive work by a qualified technician to restore the product to normal
operation.
zIf the product has been dropped or the cabinet has been damaged.
zIf the product exhibits a distinct change in performance, indicating a need for
service.
Power and extension cords.
zDo not allow anything to rest on the power cord.
zDo not locate this product where persons will walk on the cord.
zUse the proper power cord with correct attachment plug type. If the power
source is 120VAC, use a power cord that has UL and C-UL approvals. If the
power source is a 240VAC supply, use the tandem (T blade) type attachment
plug with ground conductor power cord that meets the meets the respective
European country’s safety regulations, such as VDE for Germany.
zDo not overload wall outlets or power cords. Ensure that the total of all units
plugged into the wall outlet does not exceed 10 amperes.
zEnsure that the total ampere ratings on all units plugged into the extension cord
is not above the cord’s rating.
zIf the power supply cord, which came with your monitor, is to be connected to
the PC instead of the wall outlet, this equipment is to be used with UL/TUV
approved computers with receptacle rated 100~240VAC, 50/60Hz,
1.0A(minimum).
Environment
zPlace the monitor on a flat and leveled surface.
zPlace the monitor in a will-ventilated place.
zKeep the monitor away from:
Overly hot, cold or humid places, or places directly under sunlight, dusty
surroundings, equipment that generate strong magnetic fields.
