Husqvarna LB 442i User manual

LB 442i, LB 448i
EN Operator's manual 7-23
BG Ръководство за експлоатация 24-44
CS Návod k použití 45-62
DA Brugsanvisning 63-80
DE Bedienungsanweisung 81-100
EL Οδηγίες χρήσης 101-121
ES Manual de usuario 122-141
ET Kasutusjuhend 142-158
FI Käyttöohje 159-176
FR Manuel d'utilisation 177-196
HR Priručnik za korištenje 197-214
HU Használati utasítás 215-233
IT Manuale dell'operatore 234-252
JA 取扱説明書 253-269
LT Operatoriaus vadovas 270-287
LV Lietošanas pamācība 288-306
NL Gebruiksaanwijzing 307-326
NO Bruksanvisning 327-344
PL Instrukcja obsługi 345-364
PT Manual do utilizador 365-384
RO Instrucţiuni de utilizare 385-403
RU Руководство по эксплуатации 404-426
SK Návod na obsluhu 427-445
SL Navodila za uporabo 446-463
SR Priručnik za rukovaoca 464-481
SV Bruksanvisning 482-499
TR Kullanım kılavuzu 500-517
UK Посібник користувача 518-538
ZH 操作手册 539-552

7 8
1
10
11
9
1
2
3
4
514
15
16
17
13
6
12
1
2 3 4 5 6 7
8 9 10 11 12 13
14 15

16 17
18 19
20 21
22 23

24 25
26 27
28 29
30 31

32 33
34 35
B
A
36 37
38 39

40 41
42 43
44 45

Contents
Introduction..................................................................... 7
Safety..............................................................................8
Assembly...................................................................... 15
Operation...................................................................... 16
Maintenance................................................................. 18
Troubleshooting............................................................ 19
Transportation, storage and disposal........................... 21
Technical data.............................................................. 22
EC Declaration of Conformity....................................... 23
Introduction
Product description
The product is a pedestrian-controlled rotary lawn
mower that usesBioClip® to cut the grass into fertilizer.
Intended use
Use the product to cut grass. Do not use the product for
other tasks.
Product overview
(Fig. 1)
1. Control panel
2. Motor brake handle
3. Start inhibitor
4. Safety key
5. Handle adjustment lever
6. Battery cover
7. ON/OFF button
8. SavE button
9. SavE indicator
10. Battery indicator
11. Error LED
12. Cutting cover
13. Air intakes
14. Rating plate
15. Battery charger (Accessory)
16. Battery (Accessory)
17. Operator's manual
Symbols on the product
(Fig. 2) WARNING: This product
can be dangerous and
cause serious injury or
death to the operator or
others. Be careful and
use the product
correctly.
(Fig. 3) Read the operator's
manual carefully and
make sure that you
understand the
instructions before you
use this product.
(Fig. 4) Keep persons and
animals at a safe
distance from the work
area.
(Fig. 5) Look out for thrown
objects and ricochets.
(Fig. 6) Warning: Keep hands
and feet away from the
rotating blade.
(Fig. 7) Warning: Keep hands
and feet away from
rotating parts.
(Fig. 8) Remove the safety key
before you do repair
work or maintenance.
(Fig. 9) Environmental mark.The
product or package of
1520 - 002 - 09.11.2020 7

the product is not
domestic waste.
Recycle it at an
approved disposal
location for electrical
and electronic
equipment.
(Fig. 10) The product agrees with
applicable EC directives.
(Fig. 11) The product agrees with
applicable Eurasian
Customs Union
directives.
(Fig. 12) The product agrees with
applicable UkrSEPRO
directives.
(Fig. 13) The product agrees with
applicable RCM
directives. Applies to
AU/NZ only
(Fig. 14) Noise emission to the environment
complies with applicable EC Directives.
The noise emission of the product is
specified in Technical data on page 22
and on the decal.
Protected against
splashing water.
(Fig. 15) Scannable code
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Instructions decals
(Fig. 16)
Start instruction, refer to To start the product on page
17 .
(Fig. 17)
Stop instruction, refer to To stop
the product on page 17 .
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.
Safety
Safety definitions
Warnings, cautions and notes
are used to point out specially
important parts of the manual.
WARNING: Used if there
is a risk of injury or death
for the operator or
bystanders if the
instructions in the
manual are not obeyed.
CAUTION: Used if there
is a risk of damage to the
product, other materials
or the adjacent area if
the instructions in the
manual are not obeyed.
81520 - 002 - 09.11.2020

Note: Used to give more
information that is necessary in
a given situation.
General safety instructions
WARNING: Read the
warning instructions that
follow before you use the
product.
•This product is dangerous if
used incorrectly or if you are
not careful. Injury or death can
occur if you do not obey the
safety instructions.
•This product produces an
electromagnetic field during
operation. This field may
under some circumstances
interfere with active or passive
medical implants. To reduce
the risk of serious or fatal
injury we recommend persons
with medical implants to
consult their physician and the
medical implant manufacturer
before operating this product.
•Always be careful and use
your common sense. If you
are not sure how to operate
the product in a special
situation, stop and speak to
your Husqvarna dealer before
you continue.
•Keep in mind that the operator
will be held responsible for
accidents that involve other
persons or their property.
•Keep the product clean. Make
sure that you can clearly read
signs and decals.
•Never allow children or people
unfamiliar with these
instructions to use the
appliance. Local regulations
may restrict the age of the
operator
•Always monitor a person, with
decreased physical capacity or
mental capacity, that uses the
product. A responsible adult
must be there at all times.
•Do not use the product if you
are tired, ill, or under the
influence of alcohol, drugs or
medicine. This has a negative
effect on your vision,
alertness, coordination and
judgment.
•Do not use the product if it is
defective.
•Do not change this product or
use it if it is possible that it has
been changed by others.
Work area safety
WARNING: Read the
warning instructions that
follow before you use the
product.
1520 - 002 - 09.11.2020 9

•Remove objects such as
branches, twigs and stones
from the work area before you
use the product.
•Objects that hit against the
cutting equipment can eject
and cause damage to persons
and objects. Keep bystanders
and animals at a safe distance
from the product.
•Never use the product in bad
weather such as fog, rain,
strong winds, intense cold and
risk of lightning. To use the
product in bad weather or in
moist or wet locations is tiring.
Bad weather can cause
dangerous conditions, such as
slippery surfaces.
•Look out for persons, objects
and situations that can prevent
safe operation of the product.
•Look out for obstacles, such
as roots, stones, twigs, pits
and ditches. Long grass can
hide obstacles.
•To cut grass on slopes can be
dangerous. Do not mow
excessively steep slopes. Do
not use the product on ground
that slopes more than 15°
•Exercise extreme caution
when changing direction on
slopes. Operate the product
across the face of slopes. Do
not move up and down.
•Be careful when you go near
hidden corners and objects
that prevent a clear view.
Work safety
WARNING: Read the
warning instructions that
follow before you use the
product.
•Use this product to cut grass
lawns only. It is not permitted
to use it for other tasks.
•Use personal protective
equipment. Refer to Personal
protective equipment on page
11 .
•Make sure that you know how
to stop the motor quickly in an
emergency.
•Do not operate the product in
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
•Do not operate the product
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
•Make sure that the blade does
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
10 1520 - 002 - 09.11.2020