HY-LINE CMLUX-24S Installation manual

CMLUX-24S
2 by 4 HDMI V1.3 Matrix
Operation Manual
CMLUX-24S

Revision History
Version No. Date Summary of Change
V1 20081111 Preliminary Release
V2 20090407 HDMI Cable distance&
Remote Control distance.
Precaution
Failure to follow the precautions described below may cause damage to
HDMI 1.3 Matrix Box and void the warranty.
 DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
 DO NOT use third-Party AC adapter or power cord. Doing so may
damage HDMI 1.3 Matrix.
 DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
 DO NOT set any liquids or beverages on the drive as they may
damage HDMI 1.3 Matrix.

Table of Contents
1
1
1
1
2
3
4
5
5
6
7
8
1. Introduction.....…………………………………………................................
2. Application.............................………………………………………….....…
3. Package Contents...............................……………………………….…….
4. System Requirement................................……………………………..……
5. Features................................………………………………………...………..
6. Installation................................…………………………………...…………..
7. Front View................................…………………………………...…………..
8. Remote Control.......................…………………………………...……….….
9. RS-232 Protocal.......................…………………………………...…………..
9.1 Commands.......................…………………………………...…………..
10. Connection and Installation..................................................................
11. Specications..........................................................................................

1. Introduction
Thank you for purchasing the HDMI V1.3 Matrix. Due to the increasing
popularity of HDMI products people are starting to have more than one
HDMI device in their home or office. The HDMI V1.3 Matrix is an excellent
solution for connecting all of your HDMI devices and sources together and
with an excellent remote control to switch between the devices and sources
this system is also easy to use. Furthermore, the HDMI V1.3 Matrix can transfer
Deep Color video and bit stream digital audio, it also supports HDMI 1.3,
HDCP 1.1 and DVI 1.0.
2. Application
 High performance HDMI 1.3 Matrix with two inputs and four outputs and
a remote control allowing you to link your favorite HDMI devices in order
to enjoy movies, music, or games at the same time.
 Each of the two HDMI sources can be directed to any of the four HDMI
displays or one source can be directed to all of the displays.
 When an HDMI signal progresses through the system, it is re-timed, and
level-compensated.
 Define HDCP, HDMI and DVI source. The LED light will turn on to define
the input sources’format.
 Switchable EDID function for choosing the native resolution to display.
3. Package Contents
 2 by 4 V1.3 HDMI Matrix.
 Remote Control CR33 (with Battery)
 IR Receiver
 Power Cord
 5V DC power supply adaptor.
 Operation Manual.
4. System requirement
HDMI input device(s) and HDMI output device(s).
1

5. Features
 HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant.
 Supports digital video formats in 12bit Deep Color and new lossless
compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
digital audio.
 The HDMI input is compensated, clock / phase adjusted and jitter
free so the output is a brand new, standard HDMI signal.
 Supports input source LED indicators on each output select.
 Compatible with all HDMI sources and displays.
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.
 Supports RS-232 control.
 Supports IR remote control and IR extender.
 Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).
 Supports LPCM7.1 channels output from each independent HDMI ports.
 HDMI cable distance testing that with 1080p/8bit resolution, the Input
distance is 10 meters and with 1080p/12bit the Input distance is 10 meters.
 HDMI cable distance testing showed that with 1080p/8bit the output
distance is 10meters, and with 1080p/12bit the output distance is 6meters.
2

6. Installation
1 EDID Control Switcher: Default factory setting is TV, leave as is when the
displays are working properly. Switch to STD to use the built-in EDID. Detailed
capabilities in Note.
2 RS-232 communication port: Connect to the COM port of your PC for long
distance control using RS-232. Detail specifications in section 9.
3 HDMI outputs: Connect each of these output ports to the HDMI display(s).
4 HDMI inputs: Connect input ports to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
5 Power: Plug the 5VDC power supply into the unit and connect the adaptor
to an AC wall outlet.
6 IR extender.
Note: 1. EDID Control Switch: STD(INT) and TV(EXT), Default setting is TV
2. When EDID is on TV: Leave as is if the display is working properly. The
unit will detect the first HDMI output source’s EDID and will record
in the unit. If the first detected output source is DVI it will move on to
the next source until the first HDMI has been detected. The detection
priority is HDMI v1.3 > HDMI v1.2 > DVI.
3. When EDID is on STD: Unit will use build-in EDID
Video Support→1080p 12bit(max)
Audio Support→PCM2
4. Your EDID Selection will only activated when the unit is re-plugged
and powered on.
1
2
3 4 5 6
HDMI OUTPUT HDMI INPUT
STD TV
EDID
RS-232
DC BA 21
DC 5V
IR
3

7. Front View
1 Remote control sensor.
2 Power switch & LED Indicator: The green LED will switch on when the
power is turned on and the red LED will turn off when power is switched off.
3 Input Select/Indicators (A): Press the HDMI out “A”button repeatedly to
switch to your desired source and the LED will turn on to indicate which
input source is being selected and will route it to the HDMI A output. When
the input source is HDMI/DVI , the HDMI/DVI LED will turn on, if the input
source has HDCP protection the HDCP LED will turn on.
4 Input Select/Indicators (B): Press the HDMI out “B”button repeatedly to
switch to your desired source and the LED will switch on to indicate which
input source is being selected and it will route it to the HDMI B output.
When the input source is HDMI/DVI , the HDMI/DVI LED will turn, if the input
source has HDCP protection the HDCP LED will switch on.
5 Input Select/Indicators (C): Press the HDMI out “C”button repeatedly to
switch to your desired source and the LED will switch to indicate which
input source is being selected and it will route it to the HDMI C output.
When the input source is HDMI/DVI , the HDMI/DVI LED will turn on, if the
input source has HDCP protection the HDCP LED will switch on.
6 Input Select/Indicators (D): Press the HDMI out “D”button repeatedly to
switch to your desired source and the LED will turn on to indicate which
input source is being selected and it will route it to the HDMI D output.
When the input source is HDMI/DVI , the HDMI/DVI LED will switch on, if the
input source has HDCP protection the HDCP LED will turn on.
7 HDCP Source light: When the input source(s) have HDCP, the HDMI 1.3
Matrix will detect the code and send it to the output source(s).
8 HDMI/DVI Source light: When the input source(s) is HDMI format, the LED
light will switch on.
1 2 3 4 5 6 7 8
CMLUX-24S
2X4 HDMI v1.3 Matri x
POWER
INPUT
12
HDCP HDMI/DVI
INPUT
12
HDCP HDMI/DVI
INPUT
12
HDCP HDMI/DVI
INPUT
12
HDCP HDMI/DVI
ABHDMI OUT CDHDMI OUT
4

8. Remote Control
1. Power: Press the button to turn on/off the unit.
2. Input Select for HDMI OUT A: Press 1or 2 to
select the desired input source for HDMI OUT A.
3. Input Select for HDMI OUT B: Press 1or 2 to select
the desired input source for HDMI OUT B.
4. Input Select for HDMI OUT C: Press 1or 2 to
select the desired input source for HDMI OUT C.
5. Input Select for HDMI OUT D: Press 1or 2 to
select the desired input source for HDMI OUT D.
*Notes: Selection 3&4 are not functioning for this
model.
9. RS-232 Protocal
Pin Denition
CMLUX-24S Remote Control Console
PIN Denition
→
←
PIN Denition
1 NC 1 NC
2 Tx 2 Rx
3 Rx 3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
1
2
3
4
5
A
D
C
B
OUTPUT
OUTPUT
OUTPUT
OUTPUT
POWER
CR-33
Baud Rate: 9600bps
Data bit: 8bits
Parity: None
Stop bit: 1bit
Flow Control: None
5

9.1 Commands
COMMAND ACTION
POWER 00 Power Off (standby)
POWER 01 Power On
PORT 11 Output A select Input1
PORT 12 Output A select Input2
PORT 13(No Function) Output A select Input3
PORT 14(No Function) Output A select Input4
PORT 21 Output B select Input1
PORT 22 Output B select Input2
PORT 23(No Function) Output B select Input3
PORT 24(No Function) Output B select Input4
PORT 31 Output C select Input1
PORT 32 Output C select Input2
PORT 33(No Function) Output C select Input3
PORT 34(No Function) Output C select Input4
PORT 41 Output D select Input1
PORT 42 Output D select Input2
PORT 43(No Function) Output D select Input3
PORT 44(No Function) Output D select Input4
6

10. Connection and Installation
PS3
DVD
HD TV HD TV
HD TV HD TV
30˚ 30˚
3 M
7 M
3 M
OUTPUT
A
OUTPUT
D
OUTPUT
C
OUTPUT
B
POWER
CR-33
7

Frequency bandwidth 2.25Gbps (single link)
Input ports 2 x HDMI female ports,
Output ports 4 x HDMI female ports
EDID Standard, TV/Moving Port 1
HDMI Audio output PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DD+, D-
TrueHD, DTS-HD
HDMI Cable in 1080p 8bit (10M), 1080p 12bit (10M)
HDMI Cable out 1080p 8bit (10M), 1080p 12bit (6M)
Color Space RGB_24/36,YCbCr 4:4:4_24/36, YCbCr 4:2:2,xvycc
IR Yes
Deep Color 1080p 12bit
HDMI Resolution 480I~1080p 50/60, 1080p 24, VGA~UXGA
DVI Resolution 480I~1080p 50/60, 1080p 24, VGA~UXGA
Power Supply 5VDC/6A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 438(W) x 175(D) x 49(H)
Weight(g) 3100
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C
Power Consumption 8W(Max)
11. Specications
8

20081111 MPM-CMLUX24S
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.