Hygger HG017 User manual

HG017 User Manual
hygger circulation and wave pump
Pleaseprovideyouramazonorderid(amazoninvoice)
andshippingaddress by E-mail:[email protected],
ifyouhaveanyproblems.Thanks.
1. To ensure performance, do not let the pump run dry.
2. Be careful when assemble the magnet base. Move the magnet base
parallelly to the outside wall of fish tank to prevent it from breaking.
3. Do not immerse the plug into water or other liquid.
4. Do not allow children or inexperienced people to operate or play the
product alone without safety supervision.
®
WARNINGS:

1. Introduction
2. Product Specification:
The wave-making pump can make the water flow in the tank form large
current and large circulation. It is beneficial to the stabilization of water
quality, the increase of dissolved oxygen in water and the growth of fish.
Product Features:
●Adjustable flow direction to different angles according to the needs.
●Adjustable flow rate according to the needs.
●High performance motor, low noise.
●Unique anti-reversal design.
●
●
W
Feeder function :The wave maker with switch can turn off when you feed
the fish.
ear-resistant ceramic shaft, suitable for fresh and salt water.
Model
Power (W)
Volt/Freq
Flow rate (GPH)
Recommend
tank size
Recommend
glass thickness
HG017-3000
4W 6W 12W
US standard:AC 110-120V/60Hz
EU/UK standard: AC 220-240V/50Hz
792GPH
(3000L)
1320GPH
（5000L）
2378GPH
(9000L)
3-15Gal
(11~56L)
16-105Gal
(60L~397L)
42-190Gal
(159L~720L)
≤0.315"（8MM） ≤0.39"(10MM) ≤0.47"(15MM)
HG017-5000 HG017-9000

3.Installation Instructions
Installation Diagram:
Fig.1
1.Installation:
Remove the rear magnet base from the bottom of the pump.
Place the pump at the center of the inner tank wall and hold it with one
hand.
Shift the rear magnet base along the
outside wall to the same position
with the other hand to fix the pump.
(Fig. 1)
Caution: Be careful of fingers being
clamped due to strong magnetism.
2.Plug in the power supply. The pump
can start working.
4. Maintenance:
1. Clean the pump regularly to ensure performance.

2. Use soft cloth to clean the impeller and clean the pump with clear
water.
3. The power cord of the pump must be below the power socket to form
a drip loop to prevent water from flowing into the power socket along
the power cord.
POWER CORD
DRIP LOOP
3.Important reminder:
Align the ceramic port, then insert
it into the plastic cover.
2.Hold the plastic nail with your right
hand and pull it to the right, hold the
front cover with your left hand and pull
it to the left.
1.Take off pump base

4. Disposal:
Please don’t dispose this product as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary.
Not put it together with the domestic waste which should be solved as
an authorized place for recycling of electrical and electronic appliances
for collecting and recycling waste. Please consult with your local seller
to make sure the product is disposed in an environmental friendly way.
5. Package Included:
•1 × Wave pump
•1 × User manual
6. One Year Limited Warranty:
This product MUST be purchased from an authorized hygger reseller.
Visit our website for a list of unauthorized resellers. Hygger warrants
this product against defects in materials and worksmanship for
ONE(1) YEAR from the date of original retail purchase and is none
transferable.
Warranty on all products, including aquariums. But it is limited to the
replacement of the products and does not cover fish loss, personal
injury, property loss or direct, incidental or consequential damage
arising from the use of this product.
Note: hygger One-year limited warranty does not cover damage
caused by the followings: improper installation saltwater corrosion,
electrical surges or modifications.
If you discover a defect, please contact hygger, who will, at it’s option,
repair or replace the product at no charge to you, provided that you
return it during the warranty period. A copy of the bill of sale is required
as a proof of original purchase date in the event of the product needing
repairs within the warranty period. Hygger does not warrant any
products that are not belong to hygger.

This warranty does not apply if the product has been damaged by
accident, abuse, misuse or misapplication or if the product has been
modified without the written permission of hygger.
MADE IN CHINA
Brand owner: Shenzhen Mago Trading Co., Ltd
Add: Bantian Group Business Central, Longgang District,
Shenzhen City, Guangdong Province, China
E-mail: [email protected]
Website: http://www.hygger-online.com
7.Contact Information:
EC REP E-CrossStu GmbH
Mainzer Landstr.69,Frankfurt am Main,
Baden-Württemberg,60329,Germany
[email protected]
+49󳢢69332967674
YH Consulting Limited
C/O YH Consulting Limited Office
147,Centurion House,London Road,
Staines-upon-Thames,Surrey,
TW18 4AX,London
[email protected]
[phone]
UK REP