hykolity SC20W5K-1-H User manual

Email:[e-mail] Tel: [phone]
805 Sentous Ave, City of Industry, CA 91748 US
www.hykolity.com
INSTRUCTION MANUAL
LED Security Flood Light
Safety Information
IMPORTANT：Read all safety precautions and installation instructions carefully before installing
◆ Do not handle any energized fixture or attempt to energize any fixture with wet hand or
while standing on a
wet or damp surface or in water.
◆ The fixture is designed for use in a 100-270VAC,50/60Hz . Do not use DC power.
◆ Do not look inside the lights.
◆This product can be used in garages, outdoor wall
WARNING:IF NOT FOLLOW THESE INSTRUCTION MAY LEAD TO A POTENTIALLY FATAL
ELECTRICAL SHOCK OR PROPERTY DAMAGE
PRE-INSTALLATION
HARDWARE INCLUDED
Wire Nut Rubber Fix screw Mounting bracket Ground screw EVA

Email:[e-mail] Tel: [phone]
805 Sentous Ave, City of Industry, CA 91748 US
www.hykolity.com
The Installation must be carried out by a qualified electrician.
Installation
1.Installation parts display.
3.The wire pass through EVA pad, and use spiral
connector connect the junction box wire.
4.Lamp body is aligned with the hole on the
bracket of the junction box, and use screw fixed in
the middle of the bottom box.
5.Plug the hole with a rubber plug, waterproof and
dust proof.
6.refer to the picture below: relax the screws A an
d B, Adjust the heads of the lights to the direction
you want. and then tight the screws.
2.Mounting bracket to wall connection box.