HyperX Pulsefire Warp User manual

HyperX Pulsefire Warp
User Guide

2
Languages
ENGLISH ............................................................................................................................ 3
简体中文 ........................................................................................................................... 18
繁體中文 .......................................................................................................................... 34

3
CONTENTS
Overview .........................................................................................................4
Installation .....................................................................................................5
Wireless Mode........................................................................................................... 5
Wired Mode................................................................................................................. 5
Replacement Skates .............................................................................................. 6
Charging .......................................................................................................... 7
DPI......................................................................................................................8
Polling Rate....................................................................................................9
Software - HyperX ILLUSION............................................................... 10
Software Link........................................................................................................... 10
System Requirements......................................................................................... 10
HyperX ILLUSION Features................................................................................ 10
Settings ....................................................................................................................... 11
Advance Mouse Options ......................................................................................12
Macros ........................................................................................................................ 13
Factory Reset .............................................................................................14
Restart Mouse Power .............................................................................15
Questions or Setup Issues?..................................................................15
Specifications .............................................................................................16
SKU Numbers........................................................................................................... 16

4
Overview
A
Left click
button
B
Right click
button
C
Mouse wheel
D
DPI button
E
Forward
button
F
Back button
G
USB-C port
H
Restart button
I
Polling rate
button
J
Power button
K
USB charge/
data cable
L
Spare Mouse
skates
M
USB wireless
receiver
N
Wireless
adapter

5
Installation
Wireless Mode
For optimal performance, please use the provided wireless adapter and keep within 20cm of the
mouse. These instructions apply both for Computers and Game Consoles (PS4, PS5, Xbox One, Xbox
Series X|S).
1. Connect the wireless receiver to the wireless adapter.
2. Connect the USB-C connector to the wireless adapter.
3. Connect the USB-A connector to the computer or game console.
4. Flip the mouse to its underside.
5. Hold the Power button until green light appears
Wired Mode
Connect the mouse to a PC using the included USB-C to USB-A cable. These instructions apply both
for Computers and Game Consoles (PS4, PS5, Xbox One, Xbox Series X|S).
1. Connect the USB-C connector into the mouse USB-C port.
2. Connect the USB-A connector into the computer or game console.

6
Replacement Skates
Pulsefire Warp Wireless includes an extra set of PTFE skates in case the preinstalled skates are lost,
damaged, or worn. To replace the skates, follow these instructions
1. Remove the skate by gently wedging a flat tool under the skate. If needed, use a small flathead
screwdriver, plastic card, or similar tool.
2. Lift and pry the skate from the mouse
3. Remove adhesive residue and debris from the mouse. A clean dry surface will provide optimal
adhesion.
4. Peel the replacement mouse skate from the backing paper and install on the mouse. Use
tweezers if needed.
5. Remove the outer protective film.

7
Charging
It is recommended to fully charge your mouse before first use.
The mouse is charged via USB-C port, located at the top part of the mouse.
While the cable is attached, the mouse will operate in wired mode.
Battery percentage can be found on the top right corner in HyperX ILLUSION software, while
unplugged in Wireless Mode.

8
DPI
There are 7 default DPI presets.
Customizing and saving DPI settings can be done within HyperX ILLUSION software.
DPI Level
DPI LED Color
400
Red
800
Blue
1600
Yellow
2400
Purple
3200
Green
6400
Cyan
16000
White

9
Polling Rate
There are 4 default Polling Rate presets.
Polling Rate can also be selected within HyperX ILLUSION software
Polling Rate
Polling Rate
LED Color
125Hz
Green
250Hz
Blue
500Hz
Orange
1000Hz
Red

10
Software - HyperX ILLUSION
Software Link
Download HyperX ILLUSION software at hyperx.com/illusion
System Requirements
Windows 7 or higher
HyperX ILLUSION Features
•Modify Button Mappings
•Save, Export, Import Mouse Profiles
•Adjust Debounce Time
•Adjust DPI
•Polling Rate
•Advanced Mouse Features
oLift off Distance
oAngle Snapping
oRipple Control
•Create and Set Macro Settings
•Check Battery Life
All changes in HyperX ILLUSION software will automatically save to the mouse and will not require the
software to be running in background to maintain changes.