HyperX Cloud Buds User manual

Document No. 480HX- HEBBXX.A01
HyperX Cloud Buds
Page 1 of 7
HyperX Cloud Buds
Part Numbers
HEBBXX-MC-RD/G

Document No. 480HX- HEBBXX.A01
HyperX Cloud Buds
Page 2 of 7
TABLE OF CONTENTS
Overview........................................................................................................................................3
Specifications...............................................................................................................................4
Fitting the HyperX Cloud Buds to your Ears............................................................................5
Changing Ear Tips .......................................................................................................................5
Controls.........................................................................................................................................6
Power Button ............................................................................................................................................................ 6
Volume Buttons........................................................................................................................................................ 6
Multifunction Button ................................................................................................................................................ 6
Headset Charging ........................................................................................................................7
Status LED Indicators..................................................................................................................7
Factory Reset................................................................................................................................7
Questions or Setup Issues?.......................................................................................................7

Document No. 480HX- HEBBXX.A01
HyperX Cloud Buds
Page 3 of 7
Overview
A. HyperX Cloud Buds
B. Interchangeable ear tips
C. USB-C charge cable
D. Carrying case

Document No. 480HX- HEBBXX.A01
HyperX Cloud Buds
Page 4 of 7
Specifications
Headphone
Speaker driver : Dynamic with Neodymium magnets
Type: Neckband
Frequency response: 20Hz - 20kHz
Impedance: 65.2 Ω
Sound pressure level: 104±3 dB 1mW at 1kHz
T.H.D: ≦2% at 200-3kHz
Weight: 27.5g
Charge cable length: USB-C to USB-A: 0.2m
Inline Microphone
Element: Electret condenser microphone
Polar pattern: Omni-directional
Frequency response: 100Hz - 7.2kHz
Open circuit sensitivity: -16.5dBV (1V/Pa at1kHz)
Battery Life*
Bluetooth: 10 hours
Bluetooth
Bluetooth version: 5.1
Wireless range**: Up to 10 meters / 33 feet
Supported codecs: aptX™, aptX™ HD, SBC
Supported profiles: A2DP, AVRCP, HFP, HSP
*Tested at 50% headphone volume
**Wireless range may vary due to environmental conditions

Document No. 480HX- HEBBXX.A01
HyperX Cloud Buds
Page 5 of 7
Fitting the HyperX Cloud Buds to your Ears
1. Insert ear tip into ear.
2. Tuck stabilizer flap into ear fold.
Changing Ear Tips
1. Remove original ear tip by gripping the
stabilizer flap and stretching ear tip over the
hook on the nozzle.
2. Place new ear tip on the nozzle of the ear
bud.
3. Pull the stabilizer flap to stretch the nozzle
over the hook

Document No. 480HX- HEBBXX.A01
HyperX Cloud Buds
Page 6 of 7
Controls
Power Button
Power On/Off
Hold for 2 seconds to turn on or off.
Bluetooth® Pairing
1. With the headset off, hold the power button for 5 seconds to enter pairing mode. The LED indicator
will flash red and blue and a voice prompt will play.
2. On your Bluetooth® enabled device, search and connect to “HyperX Cloud Buds.” Once connected,
the indicator LED will flash blue every 5 seconds and a voice prompt will play.
Volume Buttons
Press the + and – buttons to adjust the volume level up or down.
Multifunction Button
Status
1 Press
2 Presses
3 Presses
Long Press
Playing Media
Play/Pause
Skip Track
Previous Track
Activate Mobile
Assistant
Receiving Call
Answer Call
X
X
Reject Call
In Call
End Call
Swap Calls
X
X
Note: Button functionality may differ depending on connected device.

Document No. 480HX- HEBBXX.A01
HyperX Cloud Buds
Page 7 of 7
Headset Charging
When the headset is connected to a charger with the USB charge cable, the status LED will indicate
the charge status. The headset will take approximately 3 hours to fully charge.
Status LED
Charging Status
Breathing red
Charging
Off
Fully charged
Status LED Indicators
The status LED on the headset indicates the current state of the headset.
Status LED
Headset Status
Flash blue every 5 seconds
Connected to a device
Flash blue every 2 seconds
Not connected to a device
Pairing mode
Flashing red and blue
Factory reset
Flash blue 5 times and light up red for 1 second
Factory Reset
To perform a factory reset on the headset, hold the power and volume up buttons together for 7
seconds. The status LED will flash red and blue 2 times, followed by solid red for 1 second. At the
same time, the headset will play two low beeps. After this, the headset will automatically turn off.
Questions or Setup Issues?
Contact the HyperX support team at: hyperxgaming.com/support/headsets