Hypro HP04434 User manual

5FT POOL AND AIR HOCKEY TABLE
ASSEMBLY INSTRUCTION
Item: HP04434

Brush
1pc Chalk 2pcs
Billiardball
1set
1pc
Plastictriangle Pusher Puck
2pcs 2pcs
Washer23mm
8pcs
4pcs
Bolt41mm
1
#4#3#2#1
#5 #6 #7 #8
#9 #10 #11 #12
#13 #14 #15 #16
#17
#22
Screw 12mm
8pcs
Screw 38mm
6pcs Screw 45mm 16pcs
Tablebody
1pc 1 pcs
MainSupport Leg-1
1pcs
AccessoryFloor Panel
2pcs
Goal
4pcs
HandleBolt 45mm
2pcs
AccessoryEndpanel
2pcs
SafetyPin Leg Levelers
6pcs Allenwrench
1pc
Powerpuck
1Piece
Cue
2pcs
1pcs
MainSupport Leg-2 1pcs Leg-1
1pcs 1 pcs
Leg end panelLeg-2
#18 #19 #20 #21
#23 #24 #25 #26

#2
#5
#4
#11
#9
#10
#10
2
Using at least two people carefully
Using screw (#12) attach the goals (#24) to the table body (#1)
place the table body (#1) onto a soft,
A
To ensure that the table is assembled correctly, please ensure that the table legs
are secured to the side of the table body with a matching part number.
ttach main support leg(#2 & #3) along with leg (#4 & #5) to the table body (#1)
using bolt and handle bolt (#9 & #11) and washer (#10).
Insert bolt(#9) into the pre-drilled holes that are marked with a blue circle
on the side panel.
non staining surface .

#6
#7
#8
#8 #13
#14
#14
#22
#23
#23
#23
#23
#23
#23
To assemble the accessory tray secure the accessory end panel (#8) to
the accessory floor panel (#6) using screw (#13)
Once done secure the completed accessory tray to
the main support legs using screw (#14)
Add leg end panel (#7) to the
leg(#4 & #5) using screw (#14)
Carefully screw the safety pin (#22) into
the pre-drilled (marked by a yellow circle) holes
in the side panel.

#11 #11
#11
#22
Using at least two adults carefully turn the table the right way up.
To fold the table, please remove all accessories from the playing surface
and remove handle bolt (#11) completely
With at least two adults carefully fold the
table towards its standing position. Once
done, insert the handle bolt (#11) and
safety pin (#22) into the table body frame
locking it into place.
#11
#22

To rotate the table, remove handle bolt (#11)
and safety pin (#22).With at least two
adults carefully rotate the table body
(#1) and rotate the legs over the table.
Once done, insert handle bolt
(#11) into the main
s
Lock the table back into place by
securing the handle bolts (#11)
into the table once move
upport leg and leg(#2 #3 #4 #5)

Dire for use of the Power Puck
1. Carefully remove the ba ery compartment cover using a screw driver.
2. Insert ba eries, ensuring correct polarity.
3. Replace and secure cover by ghtening the screw.
To charge the Power puck, connect with the ba ery box. Normal charging is around 30-40min.
Please ensure you charge the Power Puck for a minimum of 1 hour for the first charge.
To play the Power Puck, please switch on the bu on under the puck.
Ba ery warning:
1. Should not connect to more than the recommended number of ba ery
2. Non-rechargeable ba eries are not to be recharged
3. Rechargeable ba eries are only to be charged under adult supervision
4. Rechargeable ba eries are to be removed from the toy before being charged
5. Different types of ba eries or new and used ba eries are not to be mixed
6. Ba eries are to be inserted with the correct polarity
7. Exhausted ba eries are to be removed from the toy
8. The supply terminals are not to be short-circuited.
6