Hysnox HY-01 User manual

HY-01 bluetooth headset intercom
Table of Contents
1.Introduction............................................................................................................................1
1.1 Product Descriptions........................................................................................................1
1.2 Main Functions................................................................................................................2
2.Package Contents...................................................................................................................3
3.Installation Procedure...........................................................................................................4
3.1 Installation method with plastic clamp...........................................................................4
3.2 Installation method with velcro clamp...........................................................................5
3.3Use a screw plug for the headphone cable................................................................................................5
4.Quickly remove Bluetooth headset.......................................................................................................................6
5.Functions and operation of buttons.....................................................................................................................6
5.1 Turning on/off the unit.....................................................................................................................................6
5.2 Phone Controls.....................................................................................................................................................7
5.3 Music Controls......................................................................................................................................................8
5.4 To Start FM radio.................................................................................................................................................8
5.5 Start/End the Bluetooth Intercom...............................................................................................................8
5.6 To Adjust the Volume.........................................................................................................................................9
5.7 Switching mode....................................................................................................................................................9
6.Pairing method............................................................................................................................................................10
6.1 Pairing with mobile phone............................................................................................................................10
6.2 Pairing between two headsets.....................................................................................................................10
6.3 Pairing between three headsets..................................................................................................................11
7.Function priority.........................................................................................................................................................12
8.Technical parameters of product.........................................................................................................................12
9.Battery and charging instructions.......................................................................................................................13
10.Matters needing attention....................................................................................................................................14
Warranty Service.................................................................................................................................................................

1. Introduction
1.1 Product introduction
HY-01 is a full-duplex intercom Bluetooth headset for
motorcycle riders with the design that enables clear and safe
wireless communication during riding. Compatible with all
Bluetooth mobile phones and any type of helmet, our products
paired with the mobile phones to allow the riders to receive
and unplug calls, listen to music, listen to FM radio and receive
GPS navigation voice prompts, etc., at the same time, two or
three sets of network intercom call.
1.On/Off Button 6. Indicator Light
2.Knob 7.Ear Speakers
3.Charger Socket 8.Headset Plug
4.Multi-function Button 9.Microphone
5.Headset Socket 10.Butterfly Sticker
1

1.2 Main Functions
(1) After paired with a mobile phone, our products can answer
incoming calls, reject calls or hang up calls within a visible
range of 10 meters;
(2) Our products can maintain the full-duplex intercom
between the helmet Bluetooth headsets at a distance of up to
1000 meters. When the intercom is enabled, the mobile phone
is still in the standby state with the highest priority to ensure
that no calls are missed;
(3) Our products have the function of answering calls
automatically and support last code redial;
(4) Our products support FM radio function;
(5) Our products use the knob to control the previous song and
the next song of the mobile phone music, and the
multi-function keys control playback and pause;
(6) Our products can realize automatic switching between
mobile phone calls, intercom calls, stereo music and FM radio;
(7) Our products use DSP to eliminate noise (wind noise) to
ensure clear voice quality during high-speed driving;
(8) The waterproof and sunscreen design of the whole machine
is durable, and the waterproof grade reaches IP66.
2

2. Package Contents
1.Bluetooth Device 6.Headphone Velcro
2.Microphone&Ear Speakers 7.USB Cable
3.Velcro Clamp 8. Screw Driver
4.Hook and loop fasteners 9.Manual
5.Clamp
3

3. Installation Procedure
3.1 Installation method with plastic clamp
①Loosen the screws on the back of clamp with the provided
screw driver.
②Open the lining of helmet,insert the clamp in the proper
position on the left of helmet and fasten the screw(overly
fastened screw can damage the clamp)
③Slide the receiver down into the slots on the headset clamp
mount.Make sure that it is locked in securely.
④Open the lining of helmet(at ear 's position),clean the EPS
surface and affix the Velcro on with the rough surface.
⑤Affix the hook surface of earphone to the rough surface of
Velcro and properly tidy the helmet lining.
⑥Insert the headphone plug into the corresponding
headphone jack on the receiver to finish the installation.
4

3.2 Installation method with velcro clamp
You can directly use the Velcro to mount the bluetooth device
on the edge of helmet. See the following pictures.
①Tear off the white paper on velcro and stick the velcro onto
clamp&helmet
②Stick the clamp with velcro onto helmet
③Slide the receiver down into the slots on the headset clamp
mount.Make sure that it is locked in securely.
3.3Use a screw plug for the headphone cable
Put the earphone cord plug buckle on, then put in two screws,
tighten the plug with a screwdriver; if you want to pull out the
earphone plug ，first unscrew the screw with a wrench to
remove the buckle, and then pull out the earphone; Do not Pull
out the headset directly with brute force.
5

4. Quickly remove Bluetooth headset
①Remove the headphone
②Remove the device from clamp(along the arrow direction in
fingure)
③Remove the clamp from helmet(along the arrow direction in
fingure)
5.Functions and operation of buttons
5.1 Turning on / off the unit
On:Press the On/Off Button for 3 seconds until you hear a
“Di”.The blue light will flash 3 times swiftly and then turn into
regular intervals.
Off:Press the On/Off Button for 5 seconds until you hear a
“Di”.The blue light will be on for a while and then die out.
6

5.2 Phone Controls
①To answer a call –Briefly press the Multi-function button
once.
②Auto receive call –Dependant on the phone the unit will
automatically answer the call after 15 seconds of ringing.
③To reject a call –Press the Multi-function button and hold
until you hear a “Du”(around 3 seconds).
④To end a call –Whilst call is active Briefly press the
Multi-function button once.
⑤Last number redial –When in standby mode. Press and hold
the Multi-function button for 2 seconds until you hear a “Du”.
Note: Depending on the phone some or all of these functions
may not work, or operate differently.
7

Warranty Service
Warranty Service: 2 years 合格证
This card is a product warranty Certificate
card, please keep it properly; Model:
Please attach a receipt to the Inspector:
warranty card to prove the date Date of manufacture:
of purchase.
Date of purchase：
Customer Name:
Customer Phone:
Customer Address:
Please fill in the product failure description so that we can deal
with it in time.
8

5.3 Music Controls
①Play / Pause –Briefly press the Multi-function button once.
②Next Track –Turn the knob counterclockwise to select the
next music.
③Previous Track –Turn the knob clockwise to go back to the
previous music.
5.4 To Start FM radio
①After turn the unit on, double press the Multi-function button
to start FM radio.When there is no call or intercom.
②Slowly turn the knob counterclockwise and clockwise to
adjust the station.
③When FM radio is on, double press the Multi-function button
to stop FM radio.
Note: In order to make FM radio the best effect, you should pay
attention to the following instruction:
a:The line of earphone is unfolded.
b:Try to listen to the FM radio outside or near the window.
5.5 Start/End the Bluetooth Intercom
Start: When the two paired Bluetooth intercom headsets are in
standby mode,Briefly press the On/Off button on either one of
the two paired devices and a voice prompt will be heard after
completing the intercom connection.
End: Briefly press the On/Off button and intercom closes after a
“Di”prompt tone
8

5.6 To Adjust the Volume
Rotate the knob counterclockwise and hold it down to increase
the volume, rotate the knob clockwise and hold it down to
decrease the volume, let go when the volume is adjusted to the
right level, and you can hear a "thump" sound when you adjust
the volume. Highest or lowest volume.
Note: Depending on the phone some or all of these functions
may not work, or operate differently.
5.7 Switching mode
①Switch Between Intercom and Music/FM Radio:When in
intercom mode,Briefly press the Multi-function button and a
“Di”prompt tone can be heard.After,switching between music
and FM radio, please refer to “②”.
②Switch Between Music and FM Radio: Double press the
Multi-function button to FM Radio. When listening to the FM
Radio, double press the Multi-function button to exit FM Radio,
then Briefly press theMulti-function button once time to music.
③A. If the intercom headset is also connected to the mobile
phone, when there is a phone call, the intercom will
automatically disconnect, switch to the mobile phone headset
to answer the call, and automatically resume the intercom state
after the call ends;
B. The operation needs to be effective within a limited
distance;
C. It takes about 5 seconds to switch back from the mobile
phone call state to the Bluetooth intercom state.
9

6.Pairing method
6.1 Pairing with mobile phone
①Ensure the Bluetooth intercom headset is off and within 1m
visible range of the mobile phone to be paired.
②Press down device On/Off button for 8 seconds until you see
the red light and blue light flash alternatively, it means device
enter pairing status.
③Open the Bluetooth function on your mobile phone.
④Bluetooth on your phone will search the device until you see
Hysnox .
⑤Click Hysnox on your phone,when you see the blue light
flashes regularly,it means pairing is successful.(Already paired
successfully, you can connect to Bluetooth in standby mode
next time)
6.2 Pairing between two headsets
①Ensure both devices are off and within 1m visible range of
each other.Press down both devices On/Off button for 8
seconds until you see the red light and blue light flash
alternatively,both devices enter pairing status.
②Quickly press the On/Off button on either two devices.Then it
will search for the other devices for pairing.When the blue light
flashes regularly it means pairing is successful.
③At the same time, long press the power button of the two
helmet Bluetooth headsets for 8 seconds to enter the pairing
mode (red and blue lights flash alternately); short press the
power button of any one of the two helmet Bluetooth headsets,
the headset will automatically search for nearby helmet
Bluetooth Pair the headset device.
④When paired, you do not need to go into pairing mode again.
In future you only need to go into standby mode (blue light
flashing) on both units and press the button on one of the
devices. 10

Note: When 2 bluetooth devices need to pair for intercom, also
need to connect mobile phone, you should following the
instruction:
a: Firstly, two bluetooth devices need to pair for intercom
successfully,(see the above instruction), then turn off the two
bluetooth devices.
b: Turn on one of bluetooth devices, also turn on the mobile
phone bluetooth, let the mobile phone connect the bluetooth
device successfully.
c: Turn on the other bluetooth device, next you only need to
press the bluetooth device (any one of two is OK)
power/intercom button, the two bluetooth devices can
intercom now.
6.3 Pairing between three headsets
①Firstly,pair two devices A and B as described above.
②Secondly,turn off A and B,pair A and C
as described of 6.2.
③Thirdly,turn off C and A,pair B and C
as described of 6.2.
④At last turn on A.
⑤Pressing the On/Off button of A 1
time to call C and 2 times to call B;
Pressing the On/Off button of B 1 time to call C and 2 times to
call A;
Pressing the On/Off button of C 1 time to call B and 2 times to
call A.
Note:When two devices are on intercom, you must first press
the On/Off button 1 time to exit the intercom, and then switch
to another intercom according to the above operation.
11

7.Function priority
Level 1: Phone
Level 2: Bluetooth intercom
Level 3: Music/FM radio
8.Technical parameters of product
Working distance：1000 meters
Frequency：2.4GHz
Supports：A2DP and AVRCP
Supported Bluetooth Profiles ：Bluetooth headset and hands
free profiles with automatic detection
Operating Range：Up to 10m for cellphones
Battery Type：Rechargeable lithium polymer 600mAh
Stand by：Up to 300 hours
Talking Time ：Mobile phone talk/listen to music up to 14
hours; intercom up to 12 hours.
Charging Time：About 2.5 hours
Power Adaptor：DC5V 1A (Optional)
Charging interface：TYPE-C interface
Working temperature：41F-104F (5℃-40℃)
Storage temperature：-4F-122F (-20℃~50℃)
12

9.Battery and charging instructions
Before using this device, Please charge the headset with charger.
Please ensure that the battery is fully recharged when you first
time use it.We have provided you with the ability to charge the
system via the USB port of your computer or if you are away on
a trip, you can use Multi-voltage USB power adapter.
The charging cable has a small USB plug for the headset and the
large USB plug for the computer or AC adapter; please observe
to correct orientation of the USB plug and socket before
inserting
1)Insert the USB plug of the charging cable, into the USB small
jack of the headset; you can either charging by computer or
AC adapter.
2)While charging, the red LED on the headset module will flash
slowly;When fully charged, the red light will remain on. A
normal charge from a low battery will take about 2.5 hours.
Note: if you do not use the headset for a month or more, to
protect the Poly-Li battery, please charge the headset at least
every month. (The fault damaged by wrong charging will be not
guaranteed.
13

10.Note
①If you don't use the headset for one month or more, in order
to protect the headset lithium battery, please charge the
headset once every two months (the damage caused by
incorrect charging will not be guaranteed);
②The suitable storage temperature of this product is -20℃to
50 ℃, please do not store in an environment with too high or
too low temperature, otherwise it will affect the service life of
the product;
③Do not expose this product to open flames to avoid explosion;
④The two screws of the earphone jack plug buckle can be
opened and tightened by oneself, and the earphone is fixed. The
screws of other mainframes cannot be opened by oneself, so as
to avoid the motherboard short circuit or the loosening of other
lines of the battery, which will affect the normal use.
14