HOW TO REMOVE WINDSHIELD/WINDOW FOGGING
DEFOGGING WINDSHIELD
DOES YOUR A/C GET COLD ENOUGH?
• If the interior of the car is hot when you
rst get in, open the window for a few
minutes to expel the hot air.
• When you are using the air conditioning
system, keep all windows closed to keep
hot air out.
• Settemperaturecontroltowarm.
• Setfanspeedtohigherposition.
c) Use Rear Defogger Switch to clear
Rear Windshield fog (If installed)
• Therearwindshielddefrosteristurned
ON by pushing the switch.
• AfterswitchingON,defoggerturnsOFF
automatically within 20 minutes
• Use same switch to switch ‘ON’ and
‘OFF’
Note:
• BlowerwithoutACshouldonlybeusedwithFreshAirmodetoavoidanyfogging.
• OperateACatrstblowerspeedafterinitialcoolingathighspeed.
• Do not turn the air louvers towards window side to prevent formation of fog on
windows.
3. Air Intake Control
This allows you to select fresh outside air
or to recirculate inside air.
4. Air Flow Control
Thisisusedtodirecttheowofair.
Aircanbedirectedtotheoor,dashboard
outlets or windshield.
5. Fan Speed Control
This is used to turn the blower fan on and
off and to select the fan speed.
6. Rear Window Defroster Switch*
* if equipped
a) To remove internal fog on windshield
• Setairintaketofreshairmode
• Setairowtodefrost
• Turn“ON”theA/C.
• Set temperature control to desired
position.
• Setfanspeedasrequired.
b) To remove external fog on windshield
• Setintakeairtofreshairmode
• Setairowcontroltodefrost
•When moving slowly, as in heavy trafc,
shift to a lower gear. This increases
engine speed, which in turn increases the
speed of the air conditioning compressor.
•Onsteepgrades,turntheairconditioning
off to avoid the possibility of the engine
overheating.
1. Temperature Control
This is used to turn the heating system
on and off and to select the degree of
heating desired.
2. AC“ON/OFF”Switch
The air conditioning is turned on by
pushing the AC button.
1
6