Hyundai GD-03 User manual

Front Panel Controls
User Manual
GD-03
USB/AUX/Bluetooth/iPod Player
with AM/FM Radio
AUDIO
PUSH
TUNE
POWER
PUSH
VOL
RADIO
MEDIA
SETUP
PHONE
VOICE

Important Note --------------------------------------------------------------------------
Before operating the unit, please read this manual thoroughly and retain it for future
reference.
Please refer to the main vehicle user manual section "Features of Your Vehicle" for
general information regarding radio reception and care and use of the vehicle mounted
antenna, and care and use of media (USB etc.).
The operation of the Steering wheel controls in the main vehicle user manual are not
relevant to the radio model depicted in this user manual.
-------------------------------------------------------------------------------------------------

Contents
Location of Controls ............................................................. 2
Getting Started ...................................................................... 4
Radio ...................................................................................... 6
USB/iPod Music Player ......................................................... 8
USB Image Player ............................................................... 13
My Music .............................................................................. 14
Auxiliary Device .................................................................. 16
Bluetooth .................................................................. 17
Apple CarPlay ...................................................................... 27
Android Auto ...................................................................... 33
Settings ................................................................................ 36
Appendix .............................................................................. 40
Specifications ...................................................................... 44
1

AUDIO
PUSH
TUNE
POWER
PUSH
VOL
RADIO
MEDIA
SETUP
PHONE
VOICE
Location of Controls
2
Front View of the Unit
➏Microphone for Hands-free and Voice
recognition function.
➐ POWER button with VOLUME [VOL]
dial: Turn the power on/off (press), turn
the display on/off (press and hold);
adjust the volume (rotate).
➑RADIO button: Select the radio function
or band (press: FM1 → FM2 → AM →
FM1 → ....).
➒MEDIA button: Switch the mode between
the Media menu and previous function
screen.
➊AUDIO button with TUNE/FILE dial:
Change the item for setting/searching
(press); find a station manually, show the
previous/next track/file name (rotate).
➋SETUP button: Switch the mode between
the system settings and previous function
screen.
➌PHONE button: Enter the Bluetooth
phone menu.
➍Display window
➎VOICE button: Activate voice tag, Siri or
Google Voice function.
➊
➎
➋
➌
➍
➏
➒
➐
➑
Note -----------------------------------------------------------------------------------------------------------------
If the unit does not operate normally,
You can reset the unit.
Press the RADIO and VOICE button at the same time.

VOL
MUTE
MODE
AUX USB
Location of Controls
3
➊AUX Input terminal: Connect an external
device.
➋USB port: Connect an iPod/iPhone,
Android Auto-compatible device or USB
storage device.
Steering Wheel Controls
Media Hub Input Port
➊ ➋
➊+ VOLUME [VOL]-buttons: Adjust the volume.
➋SEEK buttons: Skip the previous/next preset
station/track (press); fast tune up/down frequencies
and seek a station or fast-forward/rewind a track
(press and hold).
➌MODE button: Turn the system on, select the radio
or connected external device (press: FM1 → FM2 →
AM → USB Music/iPod → AUX → Bluetooth Audio
→ Apple CarPlay/Android Auto → My Music → FM1
→ ....); turn the system off or on (press and hold).
➍MUTE button: Turn the mute function on/off.
➊
➋➌➍

Getting Started
4
Operating the Basic Function
▶Turning on/off the unit
1 Switch car ignition switch to ACC or
ON to turn the unit on.
The drive safety message screen is
displayed.
When power is turned off, press the
POWER button or MODE button on
the steering wheel remote control to
turn the unit on.
2Tap the Agree.
The previously selected station is
received or the file is played.
• To agree automatically, activate the
checkbox.
3To turn the unit off, press the POWER
button or press and hold the MODE
button on the steering wheel remote
control.
When the unit is turned off, the clock and
date are appear on the screen.
You can turn the display off. (Refer to
"Setting the Screen Type for Power off
(Standby) Mode" on page 38: Setup >
Display > Power Off Display)
• The unit memorizes the last mode that
was last played. The last mode is saved
in the memory even if power is turned off.
When power is switched on, the last mode
is automatically launched.
• To turn the power on directly
By connecting the USB/iPod/AUX device
or pressing the PHONE, VOICE, MEDIA,
RADIO button (while the USB/Bluetooth
Phone/AUX is connected), you can also
turn the power on and the unit plays.
▶Adjusting the Volume level
1Rotate the VOLUME [VOL] dial or
push/pull the Vol +/-buttons on the
steering wheel remote control to
increase/ decrease the volume level.
The volume level will be shown on the
display. (Audio mode: 0 to 35 / Phone
mode: 0 to 15)
▶Muting the Sound quickly
1Press the MUTE button on the steering
wheel remote control to set mute on.

Getting Started
5
'Mute ' is displayed.
To restore the sound, press the MUTE
button on the steering wheel remote
control or rotate the VOLUME dial.
Turning On/Off the Display
1Press and hold the POWER button to
turn off on the display screen.
2When display is off, tap the screen or
press and hold the POWER button to
turn on the display screen.
Rear view camera screen
If tted, a rear view camera displays the
area behind the vehicle on the screen
when power is turned on and reverse gear
is selected.
The rear view camera display is not a
substitute for proper and safe backing-
up procedures. Always drive safely
and use caution when backing up. The
rear view camera display may not
detect every object behind the vehicle.
Note --------------------------------------------------
• The rear view camera function is in use by
product as an aid to keep an eye on trailers,
or when backing into tight parking spot. Do not
use this function for entertainment purpose.
• The object in rear view may appear closer or
more distant than in reality.
• Please note that the edges of the rear view
camera images may differ slightly according
to whether full screen images are displayed
when backing.
Media menu screen
1Press the MEDIA button to enter the
Media menu screen. You can choose
the mode of media on this screen.
➊USB Music: Select the Music player
via a connected USB device.
➋USB Image: Select the Image player
via a connected USB device.
➌iPod: Select the Music player via a
connected iPod device.
➍Apple CarPlay: Enter the Apple
CarPlay screen via a connected iPhone.
➎Android Auto: Enter the Android Auto
screen via a connected Android Auto-
compatible device.
➏My Music: Select the My Music
player.
➐AUX: Select the AUX via a connected
Auxiliary Device.
➑ Bluetooth Audio: Select the Audio
player via a Bluetooth device.
Note --------------------------------------------------
• If the icon of a media mode is ‘greyed’ out, it
is not available for selection as it may not be
connected or have any media available to
play.
• If the media is not connected, corresponding
modes will be disabled.
• The icon does not work when the user wears
gloves.
• If Apple CarPlay or Android Auto is
connected, Bluetooth Audio will be disabled.
➋➌➍
➎
➊
➏ ➐ ➑

Radio
6
➊[FM1/FM2/AM]: Show the current
frequency bandwidth.
➋Preset station shortcut: Recall the
Indicated station (tap); store the
current station (tap and hold).
➌Stereo: Indicate for FM stereo
reception.
➍[89.1]: Show the frequency of current
station.
➎: Indicate the station searching
mode.
➏Frequency gauge bar: Show the
position of current frequency with
bandwidth range.
➐I ◀◀ /▶▶ I : Seek up/down frequencies
for stations with good reception.
➑◀◀ /▶▶ : Tune up/down the frequency
(press); fast tune up/down the
frequency (press and hold).
➒PRESET: Open the preset station list
screen.
2Press the RADIO button to select the
desired band. The band switches as
follows;
FM1 → FM2 → AM → FM1 → ....
3To search a station automatically, tap
the ➐ I
◀◀ /▶▶ I.
When a station is received, the
searching stops.
4To tune a desired frequency manually,
tap the ➑ ◀◀ /▶▶ .
5To open the Preset list screen, tap the
➒ PRESET, and select the desired
option as follows;
Operating the Radio Function
▶Listening to the radio stations
1Press the RADIO button to enter the
Radio function. The previously
selected station is received.
➒
➋
➌
➍➎
➏
➐ ➑
➊
󱁃
➓: Return to the previous screen.
󱁁Preset station list: Show the preset
station list.
󱁂▶Radio Display: Return to the Radio
display screen.
󱁃Auto Store: Automatically store the
strong broadcast frequencies.
▶Storing/recalling the preset
station
1 Select the band (FM1, FM2 or AM)
and desired frequency you want to
store a station into.
2Tap and hold one of the ➋ Preset
station shortcut or 󱁁 Preset station
list on preset list screen.
The selected preset station has been
stored in memory.
Repeat step 1 ~ 2 to preset other
stations.
Note --------------------------------------------------
• If you try to store another station using
the same preset number, the previously
stored station will be erased.
3Next time, if you tap the ➋ Preset
station shortcut or 󱁁 Preset station
list on preset list screen, the station is
recalled from the memory.
➓
󱁁
󱁂

Radio
7
▶Storing the stations automatically
This function lets you automatically store
the strong broadcast frequencies.
1Press the RADIO button to select the
band (FM1, FM2 or AM).
2Tap the ➒ PRESET to open the
Preset station list screen.
3Tap the 󱁃 Auto Store.
Local stations with the strong signal
are searched and stored
automatically.
And then the list menu appears on the
screen.

USB/iPod Music Player
8
Playing the USB or iPod Music
files
You can play the MP3 or WMA files stored in
a USB device or iPod.
1Connect a USB device or iPod to the
USB port.
USB/iPod Music playback starts with
automatically after recognizing the data
of the USB device or iPod.
When the USB device or iPod is
connected already, press the MEDIA >
tap the USB Music or iPod on the
Media menu screen.
Select the desired option as follows;
➊Progress bar: Show the progress bar
with elapsed time/running time for
currently song.
To move the playback position, tap the
desired position or drag to the desired
position on the Progress bar.
➋Thumbnail: Show the currently Album
art.
➌Song's information: Show the Album/
Artist/Song/File name.
➍I
◀◀ /▶▶I : Skip to previous or next le.
➎/ : Pause/resume playback
➏RPT / RDM: Change playback
mode.
➐List: Enter the song's list menu
screen.
➑COPY: Copy the current song to
My Music.
Copy feature is displayed and
operated only USB Music mode.
2To pause playback, tap the ➎.
To resume playback, tap the ➎.
3To skip to the previous or next file, tap
the ➍I
◀◀ /▶▶I repeatedly.
▶Changing the Playback mode
1To select the playback mode, tap the
➏RPT or RDM.
• : Play the current le on a loop.
• : Repeat play all les within the
current folder. (only for USB)
• : Repeat play all les within the
USB or iPod.
• : Play randomly all les within the
current folder. (only for USB)
• : Play randomly all les within the
USB or iPod.
▶Using the List mode
1Tap the ➐List.
For iPods, then select the desired ➊
Category.
➏
➌
➍ ➍➎ ➐
➋
➊
➊
File list is displayed.
Select the desired option as follows;
➑