I-Taki HIT-HD1080-2-4KW User manual

HDMI
Scaler Box
USER MANUAL
HIT-HD1080-2-4KW
Package Content -
1x HIT-HD1080-2-4KW Unit
1 user manual
1x Power adapter DC 12V with lock
2x screws
x foot pads
Any thing missed, please contact with your vendor.
Feature
The HIT-HD1080-2-4KW is designed to allow a user
to up/down scale HDMI resolution, The HDMI
resolution from 1080P to K or K to 1080P. The
other resolutions will bypass from input to output.
Supports HDCP 1. /2.2
Supports 1080P to K up scale
Supports K to 1080P Down Scale ( K :2:0 Only
support Bypass mode)
Bypass mode supports Max. resolution up to K/60Hz
: :
-1-
Specification
Function HIT-HD1080-2-4KW
HDMI In Connector HDMI A-Type Female x 1
HDMI Out Connector HDMI A-Type Female x 1
F/W Upgrade 3.5ψStereo Jack x 1
Reset Tact Switch x 1
Mode Position DIP Switch x 1
Scaling 3ψGreen LED x 1
ENG. 3ψGreen LED x 1
HDMI Out 3ψGreen LED x 1
HDMI In 3ψGreen LED x 1
Power 3ψGreen LED x 1
Max. Resolution K
Highest TMDS
Frequency Max. 600MHz
Power Adapter (Min.) DC 12V with lock
Housing Metal
Weight 27 g
Dimensions (LxWxH) 150x80x25 mm
REMOTE FRONT VIEW
1. HDMI Out
2. HDMI In
-2-
REMOTE REAR VIEW
1. F/W Upgrade
2. Reset SW
3. Mode DIP SW
. Scaling LED
5. ENG. LED
6. HDMI Out LED
7. HDMI In LED
8. Power LED
9. Power Jack (12V DC)
In tallation
1. Turn off the source device and HDTV.
2. Connect the HDMI extension cable between the HDTV
and the “HDMI OUT” port of HIT-HD1080-2-4KW.
3. Connect the HDMI extension cable between the source
device and the “HDMI IN” port of HIT-HD1080-2-4KW.
. Connect the power cord and turn on the extender.
5. Turn on the source device (equipment) and HDTV.
MODE DIP Switch Setting :
Pin1, Pin2 SCALE
Off, Off Disable
Off, On 1080P to K
On, Off K to 1080P
On, On Reserved
Pin3 ENG.
Off Disable
On Enable
ENG.: Just for factory testing.
-3-

Additional Option
Select any additional options you may require.
1. F/W Upgrade Cable
DB9
PIN5
PIN3
PIN2 3.5mm
PIN 2
PIN 3
PIN 5
Technical Specification Output Signal
Pin #
Signal
Pin #
Signal
1 TMDS Data 2+ 11 TMDS Clock Shield
2 TMDS Data 2 Shield 12 TMDS Clock -
3 TMDS Data 2- 13 CEC
TMDS Data 1+ 1 Reserved
(N.C. on device)
5 TMDS Data 1 Shield 15 SCL
6 TMDS Data 1- 16 SDA
7 TMDS Data 0+ 17 DDC/CEC Ground
8 TMDS Data 0 Shield 18 +5V Power
9 TMDS Data 0- 19 Hot Plug Detect
10 TMDS Clock+
- -