i3 HUDDLE W5502 4K C-SENSE User manual
User Manual
i3 HUDDLE
W5502 4K C-SENSE
32 i3HUDDLE Product manualFor more of our products, visit i3-meeting.com
Important Safety instructions
[SAFETY WARNING]
• To reduce the risk of re or electric shock, do not expose this product to rain or moisture.
• To prevent injury, this product must be securely attached to the oor/wall in accordance with the installation instructions.
• • To reduce the risk of electric shock, do not remove the back cover
• • Refer servicing to qualied service personnel if needed.
Icons used in this manual
[WARNING] means,
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
[CAUTION] means,
If you ignore the caution message, you may be slightly injured or the product may be damaged.
[NOTE] means,
The note helps you understand and use the product safely. Please read the note carefully before using the product.
When moving the product, please grab the handles behind and the bottom of the product as shown below picture.
• The product must keep horizontal and upright position when moving.
• Do not hold the corner of the product when you grab the bottom of the product.
Contents
Important Safety instructions ..................................................................................3
1.1 SAFETY PRECAUTION ........................................................................4
1.2 MAINTENANCE ...................................................................................6
2. Introduction ........................................................................................................7
3. Product Description ...........................................................................................8
3.1 FRONT VIEW .......................................................................................8
3.2 REAR VIEW ..........................................................................................9
4. HOME Menu Description..................................................................................10
5. i3HUDDLE OS Setup Menu Description ...........................................................11
5.1 i3HUDDLE OS Setting Overview .......................................................11
5.2 Network .............................................................................................11
5.3 Picture ...............................................................................................12
5.4 Sound ................................................................................................12
5.5 Advanced ..........................................................................................12
5.6 Restore ..............................................................................................13
5.7 System Info ........................................................................................13
5.8 Upgrade ............................................................................................13
6. Product Specication .......................................................................................14
7. Product Dimensions .........................................................................................16
8. Troubleshooting ...............................................................................................17
8-1 Product Self-Diagnosis ......................................................................17
8-2. Before Requesting Service ...............................................................17
54 i3HUDDLE Product manualFor more of our products, visit i3-meeting.com
1.1 SAFETY PRECAUTION
Note) The color and design may different by each model and the product specication are subject to change without notice for performance enhancement.
1.1.1 Power
[Warning]
• Do not use damaged power cord, plug nor loose socket. It may cause electric shock or re.
• Do not connect multiple devices into a single s socket. It may cause re due to overheating.
• Do not touch with wet hands when remove or plug the power cord to avoid electric shock.
• Insert the power plug into socket rmly. It may cause re when the connections are unstable.
• Connect the power cord to a grounded wall socket. There is risk of electric shock or injury.
• Do not bend nor pull the power cord and place heavy objects over the power cord. It may occur cord damage and this may result in re.
• Please clean only with dry cloth when the plug pin or socket are dusty. It may cause re.
[Caution]
• Do not unplug the power plug while the product is operating. It may damage the product due to electric shock.
• Only a power cord specied by product manufacturer are recommended.
Do not use the power cord from other devices. It may cause electric shock or re.
• Hold the plug itself when unplugging the power plug from the wall socket. If not, there is risk of electric shock or re.
• Before moving or installing this product, be sure to turn off the power and disconnect the power cord. To turn this product off completely, you must pull the
power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
1.1.2 Installation
[Warning]
• Do not install near any heat sources such as radiators, or other devices that produce heat. It may cause electric shock or re.
• When mounting a product on the wall, make sure not to install the product by hanging the power and signal cables on the back of it.
• Consult with your local dealer or specialized engineer to mount the product on the wall, and use the screws and wall mounts that meet the VESA standard.
Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.
• Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. If not, it may cause re.
• Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake,
force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
• Please note than the product must be supported on proper stands or installed according to the manufacturer’s recommendations. The product that are
inappropriately situated on unstable shelves, inclined planes, or vibrating places, etc., may fall over, resulting in injury.
• To reduce the risk of re or electrical shock, do not expose this product to rain, moisture or other liquids or dust. It may cause electric shock or re.
• Keep the product away from direct sunlight.
• Keep the product of the reach of children and install on the stable and at place. NEVER allow children to climb on or play on the product or the furniture
and stands on which the product is placed.
[Caution]
• Do not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.
• Make sure the product is turned off, unplugged, and all cables have been removed. It may take more than 4 people to than carry.
Do not press or put stress on the front panel of the product.
• If the product is installed in a place where the operating conditions considerably, a serious quality problem may occur due to the surrounding environment.
In this case, install the product only after consulting our dealer about the matter. (Places exposed to microscopic dust, chemicals, too high or low temperature,
high humidity, airports or stations where the product is continuously used.)
1.1.3 Cleaning
[Warning]
• Before cleaning the product, unplug the power cord and wipe gently with a soft cloth to prevent scratching.
• Do not spray water or other liquids directly on the product as electric shock may occur.
[Caution]
• Do not push, rub, or hit the surface with your ngernail or a sharp object, as this may result in scratches on the screen and image distortions.
• Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen’s nish
and cause discoloration.
• Do not spray liquid onto the surface. If water enters the product, it may result in re, electric shock, or malfunction.
1.1.4 General Usage
[Warning]
• To reduce the risk of electric shock, do not open the cover or back. No user serviceable parts inside. Refer to qualied service personnel.
• Before moving or lifting the product, disconnect the power cord and all cables.
• The route cords and cables connected to the product so that they cannot be tripped over, pulled or grabbed.
• Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in. It may result
in re, electric shock.
• Unplug this product during lightning storms or when unused for long periods of time.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• To reduce the risk of re or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the product with wet hands. Do not
install this product near ammable objects such as gasoline or candles, or expose to direct air conditioning.
• NEVER allow children to climb on or play on the product or the furniture on which it is placed. It may cause severe injury to children.
• Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the product. When a cart is used, be careful when moving
the cart/product combination to avoid injury from tip-over.
• Install where it cannot be pushed, pulled over or knocked down.
• It is recommended to move the product in the box or packing material that originally came in.
• When holding the product, the screen should face away from you to avoid damage.
[Caution]
• If a xed image displays on the screen for a long period of time, it will be imprinted and become a permanent disgurement on the screen. This is image
burn or burn-in and not covered by the warranty.
• Avoid displaying a xed image on the screen for a long period of time (2 or more hours for LCD) to prevent image burn. Recommend to power off or set the
screen saver mode when not in use.
• When watching the screen, take 5 to 15 minute breaks every hour. Viewing screen for a long period of time may cause fatigue or eye strain.
• Take care not to touch the ventilation openings. When watching the screen for a long period, the ventilation openings may become hot. This does not affect
the performance of the product or cause defects in the product.
• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
• To install batteries in remote control, open the battery cover, replace batteries matching (+) and (-) ends to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in re, personal injury, or ambient pollution.
• To prevent to swallow the small accessories for children, keep the accessories out of the reach of children.
• The product must keep horizontal and upright position when moving. Hold the top and bottom of the frame rmly. Handles are only for the
supporting purpose.
• When attaching the stand to the set, place the screen facing down on a cushioned table or at surface to protect the screen from scratches by
more than 2 people,
• Make sure that the screws are fastened tightly. (If they are not fastened securely enough, it may tilt forward after being installed.)
76 i3HUDDLE Product manualFor more of our products, visit i3-meeting.com
2. Introduction
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product.
The images in this manual may differ from the actual product and item.
55” UHD PCAP Display
Accessory User Manual HDMI Cable USB Cable(for TOUCH)
Power Cable Touch Pen x 2 Pen Holder
1.2 MAINTENANCE
1.2.1 Cleaning
• When cleaning, unplug the power cord and wipe gently
with a soft dry cloth to prevent scratching.
• Do not spray water or other liquids directly on the screen
as electric shock may occur.
• Do not clean with chemicals such as alcohol,
thinners, or benzene.
1.2.2 Installation
• Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.
If not, it may cause re or malfunction due to the high temperature product inside.
[When attaching the stand] [When mounting on a wall]
1.2.3 Panel
• Avoid displaying a xed image on the screen for a long period of time (2 or more hours for LCD) to prevent image burn. Recommend to power off or set the
power saving mode or screen saver when not in use.
• Due to technological constraints of the Panel manufacturer, the images generated by this product may appear either brighter or darker than normal by
appr. 1ppm (parts per million) pixel.
The number of sub-pixels of a panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical Resolution x 3.
For example, if the maximum resolution is 1920 x 1080, the number of sub-pixels is 1920 x 1080 x 3 = 6,220,800.
98 i3HUDDLE Product manualFor more of our products, visit i3-meeting.com
3. Product Description
3.1 FRONT VIEW
LED Indicator
- Power ON : YELLOW
- Power OFF: RED
Home Button (Press to go home screen)
- Power ON : Blue
- Power OFF : LED Off
* Press the home button for 1sec to power on and 3 sec to power off.
Pen Holder
Antenna for i3 Sync (wireless screen presenting)
Side Buttons & Port
• Power button
• i3 Sync paring button
• USB B port for Touch cable connection
• HDMI port for external source
3.2 REAR VIEW
Bracket for F/W update
OPS Slot
When you need to install OPS PC, there is a slot on for OPS PC. When you need to install OPS, remove screws and existing cover rst and screw
up again after mounting OPS PC in the
slot.
• Note that when using OPS PC Connection
• Do not connect touch sensor USB cable to the port.
(Touch sensor cable is already connected by internal OPS docking board.)
• Power on LED Display, OPS turns on automatically.
• Power off LED Display, OPS turns off automatically.
USB port for Web Camera
• Power: ON / OFF
• Menu: Display the main screen menu
• Source : VGA, HDMI1, HDMI 2, EXT.
COMPUTER
• Vol +: Volume Up (Right)
• Vol -: Volume Down (Left)
• Move Up
• Move Down
1) AC IN : 100V~ 240V, 50/60Hz
2) RS-232C
3) Audio Line out
WAN(Wide Area Networks) Ports
LAN(Local Area Networks) Ports
5
1
1
2
3
4
5
2
3
4
Table of contents
