i3 Ax41B1MVR User manual
Ax41B1MVR Megapixel IR
Bullet Camera
Instruction Manual
Before attempting to connect or operate this product, please read these
instructions carefully and save this manual for future use.
CONTENTS
SAFETY INFORMATION...
..................................................
Product Overview .............................................................
SPECIFICATION..................................................................
INSTALLATION................................................................
1
3
6
8
1. Read this Instruction Manual:
Before using the product, please carefully read through the
safety information and operation instructions.
2. Keep this Instruction Manual:
Safely store the Instruction Manual for future reference.
3. Follow instructions:
When operating the unit, please follow instructions on the
Instruction Manual.
4. Precautions:
When installing your Annexxus system, be sure to avoid:
•excessiveheat,suchasdirectsunlightorheating
appliances
•moisture,dust,andsmoke
•strongmagneticelds
•closetosourcesofpowerfulelectromagnetic
radiation, such as radios or TV transmitters
•closetohumidorexcessivelydustyplaces
•whereexposedtomechanicalvibrations
•closetouorescentlampsorobjectsreectinglight
•underunstablelightsources(maycauseickering)
•temperaturesbelow-10°Celsiusor14°Fahrenheit
andabove50°Celsiusor122°Fahrenheitfor
AX41B1MVR
5.Cleaning:
•Formaximumopticalclarity,thecameradomeorlensmust
remainclean.Useasoft,dryclothtoremovengerprintsordust
from the dome cover.
•Useablowertoremovedustfromthelens.
•Cleanthebodywithasoft,drycloth.Ifitisverydirty,usea
cloth dampened with a small quantity of neutral detergent, then
wipe dry.
•Donotusevolatilesolventssuchasalcohol,benzene,or
thinners,astheymaydamagethesurfacenishes.
6. Peripheral/accessories:
Donotplacetheunitonanunstablecart,tripod,orona
tabletopaspersonalinjuryanddamagetotheunitmayoccur
SAFETY INFORMATION
Safety Information:
2
duetoafall.Pleaseuseofciallycertiedsupport,frames,and
accessories included with the product. Follow the instructions in
this Instruction Manual during installation to ensure the quality
and maintain safety.
7. Power Supply:
Ensure the supplied voltage meets the power consumption
requirements of this camera before powering the camera on.
Incorrect voltage may cause irreparable damage to the video
camera and will effectively void the camera warranty.
8. Power cable:
The power cable must be properly secured as improper
connectionsmaycauseashortcircuit,rehazards,orserious
damageandhazards.
9.Lightningstrike:
Duringprolongedinactivity,pleaseunplugthepowercableand
thevideocabletoavoiddamagefromlightningstrikeandpower
surges.
10.Servicing
Toavoidelectricalshockandtopreservetheproductwarranty,
DONOTdisassemblesthecamera.Referservicingtoqualied
personnel only.
11. Warning:
Highvoltagecircuitrycontainedwithintheunit.Donot
disassembletoavoidelectricshock.Allmaintenanceoperations
mustbehandledbyqualiedmaintenancestaff.
SAFETY INFORMATION
The triangle symbol with lightning arrow indicates
thatungrounded“HazardousVoltage”existswithin
the unit. The voltage level may cause personal
electricshockhazards.
Thetrianglesymbolwithexclamationmark
indicates that there are important operation and
maintenance instructions in the Instruction Manual.
3
PRODUCT OVERVIEW
1. Key Features
Exceptional Images
Thiscameraemploysa5MPCMOSsensorthatquadruplessensitivity
without blurring. The camera’s technology provides picture with
greaterdetaileventhemostdifcultlightingconditions.Itdeliverscrisp
imagesthatareperfectforobject-andperson-recognition.
Smart focus
Abuilt-innine-pointfocusindicatorenablesthecameratofocus
preciselyandautomaticallyonobjects,relievingusersoftheneedto
adjustthefocusmanually.
Powerful IR Illuminator
ThepowerfulIRilluminatorlightsobjectsevenly,reducingimage
noise and storage requirements. The IR illuminator activates
automaticallywhenthelightingdimstolessthan10lux.Innight
mode,theilluminatorenablesthecameratocaptureimagesat0lux.
ICR Day/Night Switching
ThecameraincorporatesamechanicalICRltertocaptureperfect
pictures at any light level. The camera switches between day and
night modes automatically depending on the lighting conditions,
colourvideoimagecancaptureat0.3-luxandblack/whitevideo
at0lux,ensuringcrisp,clearimagesatalltimes.Thecamera’s
megapixelresolutionandmechanicalICRlterdeliversharp,
detailedcapturesandimagesofdistantobjectsineventotal
darkness.
Housing Certied to IP66 and IP67
CertiedtoIP66andIP67,die-castaluminumalloyhousingprotects
thecameraagainstextremelybadweather,makingitperfectfor
outdoor surveillance.
Easy Installation
Thecable-managementbracketenableseasyinstallationinany
location,includingwalls,surfaces,andceilings.Thecamera’sbuilt-in
user-friendlyI/Oconnectorsalsohelpreduceinstallationtimeand
maintenance costs.
4
PRODUCT OVERVIEW
5
2. Camera Overview
2.0 Camera Parts and Denition
1. sunshield
2. pipe segment
3. mounting
bracket
4. Power In
(Red+/Black-)
5. RJ-45
EthernetConnector
6. BNC
9. AlarmOut(Orange)
RS485+(Green)
RS485-(Yellow)
10.GND(Gray)
AlarmIn(Red)
Alarm Reset (Brown)
7. Audio Out (Green):
8. Audio In (Red):
Future use
Future use
Future use
Future use
PRODUCT OVERVIEW
6
1.Rainguard/extendablesunshield:minimizetheeffectsofrainand
sunlight on image quality.
2. Pipe Segment: easy to mount at different angles.
3.MountingBracket:attachtoasurface
4.Powerin(Red+/Black-):powerconnector,DC12V/AC24V.
5.RJ-45EthernetConnector:networkconnection.SupportPoE
(PoweroverEthernet).
6.BNC:videooutput
7.Audioout(Green):audiooutput-Futureuse
8.Audioin(Red):audioinput-Futureuse
9.Alarmout(Orange):alarmsignaloutputport.
RS485+(Green):Futureuse
RS485-(Yellow):Futureuse
10.GND:ground(electricity)inelectricalcircuits.
Alarmin(Red):alarmsignalinputport.
AlarmReset(Brown):forresettinganexternalalarmdevice.
SPECIFICATION
7
Image System
Image sensor 1/2.5" 5 MP CMOS image sensor optimized for low-light performance
Effective pixels 2592 (H) X 1944 (V)
Image Compression Method Triple Streaming : H.264/MPEG4/ Motion JPEG
Resolution/ Frame H.264/MPEG4: HD 720P 1280 X 720 @30fps, 640 X480@30fps, 352
X192@30fps
Rate
MJPEG: 640 X 480@30fps, 640 X 352@30fps
Electric
Sync system Internal
Built-in lens f=3.3 ~ 12 mm, F1.6, Varifocal Megapixel lens
IR-corrected, Angle of view: 22º~ 76º(Horizontal)
Shutter time AES 1/10000 to 1/3.75 sec
Alarm Yes; 1x Alarm-in, 1x Alarm-out
Day & Night Mode Mechanical ICR Filter
Minimum illumination IR LED OFF: 0.3lux (F1.2, 50 IRE)
IR LED ON: 0lux
IR LED IR LED 24pcs(850nm)
IR distance 25 meters (82 ft.)
IR turn on status Under 10 lux by auto control
LED life More than 10,000 hours (50ºC)
TV output NTSC, 720 X 480 @30fps
PAL, 720 X 576 @25fps
Feature
BLC ON/OFF
White Balance Auto/Daylight/Fluorescent/Incandescent
Sharpness Low/ Middle/High
Saturation Low/ Middle/High
Brightness Low/ Middle/High
Contrast Low/ Middle/High
Other Mirror, Flip, system log, snapshot
Power supply
Power requirement DC12V/ AC24V/ PoE(IEEE 802.3af)
Power consumption < 8W
Power connector Screwless Terminal block
Environment
SPECIFICATION
8
Operating temperature -10ºC ~ 50ºC (14ºF ~ 122 ºF)
Operating humidity 10~ 90% RH
Storage temperature -20ºC ~ 60ºC (-4ºF ~ 140 ºF)
Network
Ethernet 10Base-T/100Base-TX
Internet protocol TCP/IP, UDP, HTTP, DNS, DHCP, NTP, RTP,RTSP, ICMP, uPNP
Connectors RJ-45 Ethernet 10Base-T/100Base-TX
Browser IE browser 6.0 or above
I/O connector
Video port BNC X1, 1.0Vp-p, 75Ω
Alarm port Terminal block
Audio port 3.5mm Phone Jack (future use)
Mechanism
Dimensions (LxWxH) 300 x 88 x 86 mm (11.79" x 3.47" x 3.39")
Weight 1.3 kg (2.8 lb.)
Protection Class IP66 and IP67
Warranty One year labor and parts
NOTE:Thespecicationissubjecttochangewithoutnotice.
INSTALLATION
9
3. Camera Installation
Usetheappropriatebracketsandequipmenttomountthiscamera.
Afterinstallingthecamera,yournetworkcamerashouldbeaccessed
fromyourlocalnetwork.Congurenetworkroutersrst.
Package Contents:
Camerax1RubberPadx1
Insulationcapsx3GuidePatternStickerx1
Self-tappingscrewsx3Plasticanchorx3
RJ45femalecouplerx1DocumentCDx1
PrintedQuickStartGuidex1
3.1 Installation
This section details how to set up the camera.
3.1.1 Drill the Mounting Location
1.Placethe“guidepatternsticker”onthedesiredmounting
location.
2.Drillthemarkedholes
3.1.2 Positioning the Camera
Listedbelowaredifferentwaystoadjustthecamerapositionto
capturethedesiredeldofvision.
1.Loosenthescrew(a.)torotateeitherthecameraor“pipe
segment”.Selectthedesiredpositionthentightenthescrewto
set the position.
2.Loosenthescrewsonbothsides(b.)tochangethemounting
bracketangle.Movethecameraintothedesiredposition.
Tighten the screws to set the position.
insulation cap
pipe segment
screws(b.)
mounting
bracket
screw
(a.)
INSTALLATION
10
3.1.3 Attaching the Camera to a Surface
1.Placethe“rubberpad”insidethemountingbracket.
2.Placethe3“insulationcaps”ontothe“selftappingscrews”.
3.Positionthemountingbrackettothedesiredmounting
location.
4. Screw the camera into the holes.
-Forcementsurfaces,insertthe“plasticanchors”intothe
holes.Aligntheholesinthemountingbracket.Thenuse
the“selftappingscrews”toscrewthecameraintothe
holes.
-Foranyothersurfaces,aligntheholesinthemounting
bracket.Thenusethe“selftappingscrews”toscrewthe
camera into the holes.
Themountingbracketcanbeloosenedforeasiercable
installation.Loosenthescrew(c.)onbothsidestorotatethe
mountingbracketandadjustthecable.
screw(c.)
rubber pad
INSTALLATION
3.1.4 Adjusting Camera Focus
Note:Thiscameracanbefocusedusingaservicemonitor.Attach
theservicemonitortotheBNCCable.Ifnomonitorisavailable
then focus must be performed by using an internet browser to
view the camera images.
1. Loosen the two screws on top of the sunshield and remove the
sunshield.
2.Rotatecameracovercounterclockwisetoexposethelens.
11
focusadjust
lever
INSTALLATION
3.Loosenthezoomadjustleverscrewandfocusadjustleverscrew.
Setthedesiredeldofviewthentightenthezoomadjustleverscrew
andfocusadjustleverscrew.
Note:Twodesiccantpacksarealreadyplacednearthelens.The
desiccantpackpreventsfoggingontheinsideofthelensduetoany
moisture.Makeadjustmentswithin30minutesorthedesiccantpack
may absorb too much moisture and become ineffective.
Desiccantpacksthathaveabsorbedtoomuchmoistureneedtobe
replaced or reactivated.
Whenlensadjustmentsarecomplete,reattachthecameracoverand
sunshield.
zoomadjust
lever
12
INSTALLATION
3.1.5 Using “Smart Focus” to Adjust Focus Smartly
Thisnetworkboxcameraprovides“SmartFocus”toobtaincorrect
focusonasubject,insteadofrequiringuserstoadjustfocus
manually.9viewzonesareprovided.Whenyouobtaincorrectfocus
oneachviewzone,thegreenlightwillbeturnedon.
1.Directlyconnectthevideooutputcabletoyourmonitor.
2. Press the reset button until the power is on.
3.Theninezoneswillappearinyourmonitor.Adjustthelens
focus and symbols will be displayed on the top left corner of
eachzone.
•Thegreenlight:itmeanseachviewzone’sbestfocus
position.
•Theredarrow:itmeansitisnearthebestfocusposition.You
justneedtone-tuneit.
3.2 Network Camera Diagram
i³ iP-Pro Server
Crossoverdirectconnection
LAN VIAaGigabitSwitch
i³ iP-Pro Server
Connection type: 1
Connection type: 2
13
INSTALLATION
3.3 Hardware/Software Requirement
•Computerwebview
-i³SRX-Pro/iP-ProVersion1.610orhigher
-WindowsVistaorXPasOS
-InternetExplorerVersion6.0orlater
-CPU:IntelPentium3.2GHzorhigher
-Memory:512MBormore
-VGAcard--supportDirectX9.0orabove
•PowerSupply
ThecamerarequiresaDC12V/AC24V/PoEpowersupply.Make
sure you use the correct power supply before connecting to this
networkcamera.UseaRJ45networkconnectortoconnectthe
camera to your computer or switch.
•Switch
AGigabitSwitchisrequiredtomonitortwoormorecamerasfrom
the same computer.
3.4 Connecting the Camera to a Personal Computer
This section details how to access the camera from a computer.
3.4.1 Setting IP
ThenetworkcameraisdesignedtobeusedonanEthernet
network.ThecameraissettousethedefaultIPaddressof
192.0.0.16.IfyournetworksupportsDHCP,youwillneedtoenable
thisfeaturefromthecameranetworksettings.
3.4.2 Connect the Camera to a Personal Computer
1.Connectthenetworkcabletothecameraandthenturnonthe
camera’s power.
2.Toconnecttothecamera,thePCneedstobeonthesameIP
addressrangeasthecamera(ie.ifthecamerais192.0.0.16then
thePCcouldbe192.0.0.10)thelastdigitsonthePCIPaddress
needs to be different from the last digits on the cameras IP
address.
14
INSTALLATION
3.TomakesurecanconnecttothecamerawithyourPC,pingtheIP
addressyouset.OpencommandpromptandtypetheIPaddress
youset.Ifthemessageof“Replyfrom…”appears,itmeans
communication is established.
4. Start a browser and enter the IP address: http://192.0.0.16, a
pop-upwindowwillappearandwillrequireyoutologin.Enterthe
default user name: admin and password: 1234 to login.
5. Please install the ActiveX viewer that is required to monitor H.264,
MPEG4andM-JPEGvideomodes.
6. Images of the camera can be viewed through your web browser IE
V.6.0&up.Beforeviewing,youhavetofollowthestepsbelow.
Security level settings
HowtoChangeSecurityoptionsinyourbrowser
1. From the Tool menu, select Internet options.
2.ClickontheSecuritytab.
3.IfthecameraisontheINTRAnetClicktheLocalintraneticon,
IfthecameraisontheINTERnetclicktheInterneticon.
15
4.ClickonCustomlevel.
5.Checkthefollowingradiobuttonsinthedisplaylist:
UnderActiveXcontrolsandplug-ins
*Enable“DownloadsignedActiveXcontrols”
*Enable“RunActiveXcontrolandplug-ins”
*Enable“ScriptActiveXcontrolsmarkedsafeforscripting*”
7. Type your IP address into the browser.
8. Then you should be able to see the camera image screen as follows:
INSTALLATION
16
INSTALLATION
3.5 Using “Annexxus Finder” to Search Camera’s IP Address
“AnnexxusFinder”isaprogramwhichhelpsusersndsnetwork
cameras. Please note:“AnnexxusFinder”isonlycompatiblewith
Windows XP.
1.InserttheCDintheCD-ROMdrive.
2.Doubleclick“AnnexxusFinder.exe”toruntheprogram.Followthe
instructions to install.
3.Aftersuccessfullyinstalling“AnnexxusFinder”,doubleclickthe
“AnnexxusFinder”iconwhichisdisplayedinyourdesktop.An
“AnnexxusFinder”windowwillpopout.Thewindowwilldisplaya
list of net cameras which you are using currently.
17
INSTALLATION
To edit user accounts for the selected IP camera, do the
following:
1. Select desired camera in the Annexxus Finder software by
doubleclicks
2.GototheChangeIPAddressandenterthecorrectdataforthe
IP camera
3.ThereisNOneedforInputPassword.ItisONLYpertainingto
upgradingrmware
4. Live View
Live view is designed for general users to control the camera. “ Video
Format”,“Snapshot”,“RecordingLED”,“Live”and“Setup”functions
are listed on the live view. Please note, only administrators can
access“Setup”tocongurecamerasettings.
4.1 Video Format
Select a resolution type for live view.
18
INSTALLATION
4.2 Snapshot
The“Snapshot”functionisforsnapshotcapture.Pressthe
“Snapshot”buttontotakeapicturewhichwillbeautomatically
savedintoanautomaticallycreatedC:\DocumentandSettings\
Administrator\MyDocuments\IPCAMfolderonyourcomputer.
5. Camera settings
Setup Button
Clickon“Setup”tocongurecamerasettings.
5.1 Image Settings
19
INSTALLATION
“Image”isusedtochangeanypicturesettingonthecamera.
Remembertoclick“Save”tokeepyoursettings.
5.1.1 Image
Basic Setting
Every parameter of
“BasicSetting”affectsthe
displayed image. Specify
appropriate parameters in
the following section.
•CameraName:entera
desirednetworkcamera
name. The name will be
displayed at the top of the
Live page.
20
Table of contents
Other i3 Security Camera manuals
