JVC TK-C1380U - Color Ccd Camera User manual

R
TK-C1380U
1/2" CCD Multi-Purpose Color Camera
FEATURES
 1/2-inch Interline Transfer (IT) CCD
Digital Signal Processor (DSP)
Full genlock
Contour correction
ID capability
Three-dimensional Detect ATW
Wide-range Automatic Electronic Shutter
Y/C Output Connectors
Easy Menu-driven Parameter Setting
High-light inverter function
Backlight Compensation
C/CS Mount
AC/DC Power Supply
ARCHITECTS’AND ENGINEERS’BID SPECIFICATION
The digital signal processing (DSP) color IT CCD camera shall be JVC Model TK-C1380U
or equivalent. The TK-C1380U camera shall incorporate a 1/2" interline transfer CCD for
reducing smear, 380,000 [768(H) x 494(V)] effective pixels, achieve a lower smear and high
sensitivity of 0.95 lx at f/1.2. The camera shall display outstanding 470 lines of horizontal
resolution and a S/N ratio of 48dB. The TK-C1380U camera shall feature a built-in digital
motion detector within the compact body. The camera shall also feature intelligent digital
back light compensation with masking and electronic sensitivity-up for real surveillance
purposes under severe conditions. Both the digital motion detector and the back light
compensation features shall utilize a 48 segment mask with an 8-position sensitivity level
adjust. For better picture quality, the camera shall feature selectable DC/video for ALC
lens, digital 2H enhancer, smear level of -120 and digital white detective ATW. The camera
shall be C-/CS-mount selectable. The TK-C1380U shall offer user-friendly on-screen set-
up and adjustment of camera ID, ELC plus many other features. A special menu shall allow
fine adjustment of chrominance, pedestal and aperture level. The TK-C1380U shall provide
a variety of synchronization modes. They shall provide color genlock to help ensure
optimum performance with image processors and screen splitters. They shall also feature
VD2 lock over a single coaxial cable when used with the Matrix Systems and/or data
multiplexing unit. Line lock shall provide roll-free picture switching. The power source for
the TK-C1380U shall be 24V AC, 50/60Hz or 12V DC. All units must be UL listed.

R
TK-C1380U
Specifications
Signal system Based on NTSC standard
Image device 1/2"single CCD
Pickup element IT (Interline-Transfer) system CCD solid-
state image sensor (with complementary
color filter: Ye-Cy-Mg-Gr)
Effective picture elements 768 (H) x 494 (V)
Video process circuit Built-in DSP (9 bits)
Sync system Internal, External (Full genlock), Line lock
Sync input BB or VBS (BNC)
Video output VBS (BNC), Y/C (S terminal, 4-pin)
Video S/N 48 dB
Horizontal resolution 470 TV lines
Minimum required illumination 0.95 lx (F1.2)
Electronic shutter Normal, 1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000 sec., or
automatic electronic shutter iris mode
Automatic electronic shutter 1/60 — 1/100000 sec.
White balance 3 dimension detect ATW,
Manual (Biaxial)
BLC ON/OFF, multi-data detect BLC (6 patterns)
Lens mount C/CS mount
AGC OFF 9 dB/18dB / super AGC
Special set-up menu CONTOUR level, ENHANCE level,
PED level, HUE and IRIS level
Power requirement AC 24 V (50/60Hz), DC 12 V
Power consumption 5.6 W at AC 24 V
5.6 W at DC 12 V
Operating temperature range -10°C to 50°C (14°F to 122°F)
Weight 640g
Dimensions
TK-C1380
COLOR VIDEO CAMERA
BF LOCK
1/2 INCHI CCD
DIGITAL
2-13/16 (70) 5-7/8 (148)
6-5/16 (159)
5-7/8 (148)
6-5/16 (159)
2-3/16 (55)
1/16 (1.5)
Option
AA-P700U
AC adapter